Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure Calculator

✖The Ultimate Bearing Capacity is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.ⓘ Ultimate Bearing Capacity [q_f]			+10% -10%
✖Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.ⓘ Cohesion of Soil [C_s]			+10% -10%
✖Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.ⓘ Bearing Capacity Factor dependent on Cohesion [N_c]			+10% -10%
✖Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.ⓘ Unit Weight of Soil [γ]			+10% -10%
✖Width of Footing is the shorter dimension of the footing.ⓘ Width of Footing [B]			+10% -10%
✖Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.ⓘ Bearing Capacity Factor dependent on Unit Weight [N_γ]			+10% -10%
✖Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.ⓘ Effective Surcharge in KiloPascal [σ_s]			+10% -10%

✖Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.ⓘ Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure [N_q]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Terzaghi's Analysis Shear Failure Theories Formula PDF PDF Image

Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bearing Capacity Factor dependent on Surcharge = (Ultimate Bearing Capacity-(((2/3)*Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Effective Surcharge in KiloPascal
N_q = (q_f-(((2/3)*C_s*N_c)+(0.5*γ*B*N_γ)))/σ_s
This formula uses 8 Variables

Variables Used

Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Ultimate Bearing Capacity - (Measured in Pascal) - The Ultimate Bearing Capacity is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.
Cohesion of Soil - (Measured in Pascal) - Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.
Bearing Capacity Factor dependent on Cohesion - Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.
Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Width of Footing - (Measured in Meter) - Width of Footing is the shorter dimension of the footing.
Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.
Effective Surcharge in KiloPascal - (Measured in Pascal) - Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.

STEP 1: Convert Input(s) to Base Unit

Ultimate Bearing Capacity: 60 Kilopascal --> 60000 Pascal (Check conversion here)
Cohesion of Soil: 5 Kilopascal --> 5000 Pascal (Check conversion here)
Bearing Capacity Factor dependent on Cohesion: 9 --> No Conversion Required
Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18000 Newton per Cubic Meter (Check conversion here)
Width of Footing: 2 Meter --> 2 Meter No Conversion Required
Bearing Capacity Factor dependent on Unit Weight: 1.6 --> No Conversion Required
Effective Surcharge in KiloPascal: 45.9 Kilonewton per Square Meter --> 45900 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

N_q = (q_f-(((2/3)*C_s*N_c)+(0.5*γ*B*N_γ)))/σ_s --> (60000-(((2/3)*5000*9)+(0.5*18000*2*1.6)))/45900

Evaluating ... ...

N_q = 0.0261437908496732

STEP 3: Convert Result to Output's Unit

0.0261437908496732 --> No Conversion Required

FINAL ANSWER

0.0261437908496732 ≈ 0.026144 <-- Bearing Capacity Factor dependent on Surcharge

(Calculation completed in 00.008 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Terzaghi's Analysis Shear Failure Theories » General and Local Shear Failure » Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< General and Local Shear Failure Calculators

Mobilised Angle of Shearing Resistance Corresponding to Local Shear Failure

LaTeX Go Angle of Mobilized Friction = atan((2/3)*tan((Angle of Shearing Resistance)))

Angle of Shearing Resistance Corresponding to Local Shear Failure

LaTeX Go Angle of Shearing Resistance = atan((3/2)*tan((Angle of Mobilized Friction)))

Cohesion of Soil given Mobilised Cohesion Corresponding to Local Shear Failure

LaTeX Go Cohesion of Soil = (3/2)*Mobilised Cohesion

Mobilised Cohesion Corresponding to Local Shear Failure

LaTeX Go Mobilised Cohesion = (2/3)*Cohesion of Soil

Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure Formula

LaTeX Go

What is Surcharge?

Surcharge is the additional load on the soil which may be created due to any overlying structure or any moving object.Total stress on the surface of the soil is because of the surcharge only. So total stress is equal to the surcharge q. σ = q. No water present above this plane, hence pore water pressure is zero.

How to Calculate Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure?

Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure calculator uses Bearing Capacity Factor dependent on Surcharge = (Ultimate Bearing Capacity-(((2/3)*Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Effective Surcharge in KiloPascal to calculate the Bearing Capacity Factor dependent on Surcharge, The Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure is defined as bearing capacity factor for local shear failure varies with surcharge load, influencing soil stability and foundation design. Bearing Capacity Factor dependent on Surcharge is denoted by N_q symbol.

How to calculate Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure using this online calculator? To use this online calculator for Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure, enter Ultimate Bearing Capacity (q_f), Cohesion of Soil (C_s), Bearing Capacity Factor dependent on Cohesion (N_c), Unit Weight of Soil (γ), Width of Footing (B), Bearing Capacity Factor dependent on Unit Weight (N_γ) & Effective Surcharge in KiloPascal (σ_s) and hit the calculate button. Here is how the Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure calculation can be explained with given input values -> 0.026144 = (60000-(((2/3)*5000*9)+(0.5*18000*2*1.6)))/45900.

FAQ

What is Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure?

The Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure is defined as bearing capacity factor for local shear failure varies with surcharge load, influencing soil stability and foundation design and is represented as N_q = (q_f-(((2/3)*C_s*N_c)+(0.5*γ*B*N_γ)))/σ_s or Bearing Capacity Factor dependent on Surcharge = (Ultimate Bearing Capacity-(((2/3)*Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Effective Surcharge in KiloPascal. The Ultimate Bearing Capacity is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear, Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil, Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil, Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil, Width of Footing is the shorter dimension of the footing, Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil & Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.

How to calculate Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure?

The Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure is defined as bearing capacity factor for local shear failure varies with surcharge load, influencing soil stability and foundation design is calculated using Bearing Capacity Factor dependent on Surcharge = (Ultimate Bearing Capacity-(((2/3)*Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Effective Surcharge in KiloPascal. To calculate Bearing Capacity Factor Dependent on Surcharge for Local Shear Failure, you need Ultimate Bearing Capacity (q_f), Cohesion of Soil (C_s), Bearing Capacity Factor dependent on Cohesion (N_c), Unit Weight of Soil (γ), Width of Footing (B), Bearing Capacity Factor dependent on Unit Weight (N_γ) & Effective Surcharge in KiloPascal (σ_s). With our tool, you need to enter the respective value for Ultimate Bearing Capacity, Cohesion of Soil, Bearing Capacity Factor dependent on Cohesion, Unit Weight of Soil, Width of Footing, Bearing Capacity Factor dependent on Unit Weight & Effective Surcharge in KiloPascal and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Bearing Capacity Factor dependent on Surcharge?

In this formula, Bearing Capacity Factor dependent on Surcharge uses Ultimate Bearing Capacity, Cohesion of Soil, Bearing Capacity Factor dependent on Cohesion, Unit Weight of Soil, Width of Footing, Bearing Capacity Factor dependent on Unit Weight & Effective Surcharge in KiloPascal. We can use 1 other way(s) to calculate the same, which is/are as follows -

Bearing Capacity Factor dependent on Surcharge = (Ultimate Bearing Capacity-(((2/3)*Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/(Unit Weight of Soil*Depth of Footing)

Home

FREE PDFs

🔍 Search