Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing Calculator

✖Ultimate Bearing Capacity in Soil is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.ⓘ Ultimate Bearing Capacity in Soil [q_fc]			+10% -10%
✖Cohesion in Soil as Kilopascal is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.ⓘ Cohesion in Soil as Kilopascal [C]			+10% -10%
✖Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.ⓘ Bearing Capacity Factor dependent on Cohesion [N_c]			+10% -10%
✖Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.ⓘ Unit Weight of Soil [γ]			+10% -10%
✖Depth of Footing in Soil is the longer dimension of the footing in soil mechanics.ⓘ Depth of Footing in Soil [D_footing]			+10% -10%
✖Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.ⓘ Bearing Capacity Factor dependent on Surcharge [N_q]			+10% -10%
✖Width of Footing is the shorter dimension of the footing.ⓘ Width of Footing [B]			+10% -10%

✖Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.ⓘ Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing [N_γ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Terzaghi's Analysis Shear Failure Theories Formula PDF PDF Image

Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity in Soil-(((2/3)*Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+((Unit Weight of Soil*Depth of Footing in Soil)*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Unit Weight of Soil*Width of Footing)
N_γ = (q_fc-(((2/3)*C*N_c)+((γ*D_footing)*N_q)))/(0.5*γ*B)
This formula uses 8 Variables

Variables Used

Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.
Ultimate Bearing Capacity in Soil - (Measured in Pascal) - Ultimate Bearing Capacity in Soil is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.
Cohesion in Soil as Kilopascal - (Measured in Pascal) - Cohesion in Soil as Kilopascal is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.
Bearing Capacity Factor dependent on Cohesion - Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.
Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Depth of Footing in Soil - (Measured in Meter) - Depth of Footing in Soil is the longer dimension of the footing in soil mechanics.
Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Width of Footing - (Measured in Meter) - Width of Footing is the shorter dimension of the footing.

STEP 1: Convert Input(s) to Base Unit

Ultimate Bearing Capacity in Soil: 127.8 Kilopascal --> 127800 Pascal (Check conversion here)
Cohesion in Soil as Kilopascal: 1.27 Kilopascal --> 1270 Pascal (Check conversion here)
Bearing Capacity Factor dependent on Cohesion: 9 --> No Conversion Required
Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18000 Newton per Cubic Meter (Check conversion here)
Depth of Footing in Soil: 2.54 Meter --> 2.54 Meter No Conversion Required
Bearing Capacity Factor dependent on Surcharge: 2.01 --> No Conversion Required
Width of Footing: 2 Meter --> 2 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

N_γ = (q_fc-(((2/3)*C*N_c)+((γ*D_footing)*N_q)))/(0.5*γ*B) --> (127800-(((2/3)*1270*9)+((18000*2.54)*2.01)))/(0.5*18000*2)

Evaluating ... ...

N_γ = 1.57126666666667

STEP 3: Convert Result to Output's Unit

1.57126666666667 --> No Conversion Required

FINAL ANSWER

1.57126666666667 ≈ 1.571267 <-- Bearing Capacity Factor dependent on Unit Weight

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Terzaghi's Analysis Shear Failure Theories » General and Local Shear Failure » Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< General and Local Shear Failure Calculators

Mobilised Angle of Shearing Resistance Corresponding to Local Shear Failure

LaTeX Go Angle of Mobilized Friction = atan((2/3)*tan((Angle of Shearing Resistance)))

Angle of Shearing Resistance Corresponding to Local Shear Failure

LaTeX Go Angle of Shearing Resistance = atan((3/2)*tan((Angle of Mobilized Friction)))

Cohesion of Soil given Mobilised Cohesion Corresponding to Local Shear Failure

LaTeX Go Cohesion of Soil = (3/2)*Mobilised Cohesion

Mobilised Cohesion Corresponding to Local Shear Failure

LaTeX Go Mobilised Cohesion = (2/3)*Cohesion of Soil

Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing Formula

LaTeX Go

What is Bearing Capacity?

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the maximum average contact pressure between the foundation and the soil which should not produce shear failure in the soil.

How to Calculate Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing?

Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing calculator uses Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity in Soil-(((2/3)*Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+((Unit Weight of Soil*Depth of Footing in Soil)*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Unit Weight of Soil*Width of Footing) to calculate the Bearing Capacity Factor dependent on Unit Weight, The Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing is defined as bearing capacity factor, influenced by unit weight, describes a foundation's ability to support load based on footing dimensions. Bearing Capacity Factor dependent on Unit Weight is denoted by N_γ symbol.

How to calculate Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing using this online calculator? To use this online calculator for Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing, enter Ultimate Bearing Capacity in Soil (q_fc), Cohesion in Soil as Kilopascal (C), Bearing Capacity Factor dependent on Cohesion (N_c), Unit Weight of Soil (γ), Depth of Footing in Soil (D_footing), Bearing Capacity Factor dependent on Surcharge (N_q) & Width of Footing (B) and hit the calculate button. Here is how the Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing calculation can be explained with given input values -> 1.596667 = (127800-(((2/3)*1270*9)+((18000*2.54)*2.01)))/(0.5*18000*2).

FAQ

What is Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing?

The Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing is defined as bearing capacity factor, influenced by unit weight, describes a foundation's ability to support load based on footing dimensions and is represented as N_γ = (q_fc-(((2/3)*C*N_c)+((γ*D_footing)*N_q)))/(0.5*γ*B) or Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity in Soil-(((2/3)*Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+((Unit Weight of Soil*Depth of Footing in Soil)*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Unit Weight of Soil*Width of Footing). Ultimate Bearing Capacity in Soil is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear, Cohesion in Soil as Kilopascal is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil, Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil, Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil, Depth of Footing in Soil is the longer dimension of the footing in soil mechanics, Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge & Width of Footing is the shorter dimension of the footing.

How to calculate Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing?

The Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing is defined as bearing capacity factor, influenced by unit weight, describes a foundation's ability to support load based on footing dimensions is calculated using Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity in Soil-(((2/3)*Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+((Unit Weight of Soil*Depth of Footing in Soil)*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Unit Weight of Soil*Width of Footing). To calculate Bearing Capacity Factor Dependent on Unit Weight given Dimension of Footing, you need Ultimate Bearing Capacity in Soil (q_fc), Cohesion in Soil as Kilopascal (C), Bearing Capacity Factor dependent on Cohesion (N_c), Unit Weight of Soil (γ), Depth of Footing in Soil (D_footing), Bearing Capacity Factor dependent on Surcharge (N_q) & Width of Footing (B). With our tool, you need to enter the respective value for Ultimate Bearing Capacity in Soil, Cohesion in Soil as Kilopascal, Bearing Capacity Factor dependent on Cohesion, Unit Weight of Soil, Depth of Footing in Soil, Bearing Capacity Factor dependent on Surcharge & Width of Footing and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Bearing Capacity Factor dependent on Unit Weight?

In this formula, Bearing Capacity Factor dependent on Unit Weight uses Ultimate Bearing Capacity in Soil, Cohesion in Soil as Kilopascal, Bearing Capacity Factor dependent on Cohesion, Unit Weight of Soil, Depth of Footing in Soil, Bearing Capacity Factor dependent on Surcharge & Width of Footing. We can use 1 other way(s) to calculate the same, which is/are as follows -

Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity in Soil-(((2/3)*Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Unit Weight of Soil*Width of Footing)

Home

FREE PDFs

🔍 Search