Bearing Capacity Factor Dependent on Surcharge for General Shear Failure Calculator

✖Net Ultimate BC is the minimum net pressure intensity causing shear failure.ⓘ Net Ultimate BC [q_nu]			+10% -10%
✖Cohesion in Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.ⓘ Cohesion in Soil [c]			+10% -10%
✖Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.ⓘ Bearing Capacity Factor dependent on Cohesion [N_c]			+10% -10%
✖Width of Footing is the shorter dimension of the footing.ⓘ Width of Footing [B]			+10% -10%
✖Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.ⓘ Unit Weight of Soil [γ]			+10% -10%
✖Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.ⓘ Bearing Capacity Factor dependent on Unit Weight [N_γ]			+10% -10%
✖Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.ⓘ Effective Surcharge in KiloPascal [σ_s]			+10% -10%

✖Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.ⓘ Bearing Capacity Factor Dependent on Surcharge for General Shear Failure [N_q]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Bearing Capacity for Strip Footing for C Φ Soils Formulas PDF PDF Image

Bearing Capacity Factor Dependent on Surcharge for General Shear Failure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bearing Capacity Factor dependent on Surcharge = ((Net Ultimate BC-((Cohesion in Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Width of Footing*Unit Weight of Soil*Bearing Capacity Factor dependent on Unit Weight)))/Effective Surcharge in KiloPascal)+1
N_q = ((q_nu-((c*N_c)+(0.5*B*γ*N_γ)))/σ_s)+1
This formula uses 8 Variables

Variables Used

Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Net Ultimate BC - (Measured in Pascal) - Net Ultimate BC is the minimum net pressure intensity causing shear failure.
Cohesion in Soil - (Measured in Pascal) - Cohesion in Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.
Bearing Capacity Factor dependent on Cohesion - Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.
Width of Footing - (Measured in Meter) - Width of Footing is the shorter dimension of the footing.
Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.
Effective Surcharge in KiloPascal - (Measured in Pascal) - Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.

STEP 1: Convert Input(s) to Base Unit

Net Ultimate BC: 87 Kilonewton per Square Meter --> 87000 Pascal (Check conversion here)
Cohesion in Soil: 2.05 Pascal --> 2.05 Pascal No Conversion Required
Bearing Capacity Factor dependent on Cohesion: 9 --> No Conversion Required
Width of Footing: 2 Meter --> 2 Meter No Conversion Required
Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18000 Newton per Cubic Meter (Check conversion here)
Bearing Capacity Factor dependent on Unit Weight: 1.6 --> No Conversion Required
Effective Surcharge in KiloPascal: 45.9 Kilonewton per Square Meter --> 45900 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

N_q = ((q_nu-((c*N_c)+(0.5*B*γ*N_γ)))/σ_s)+1 --> ((87000-((2.05*9)+(0.5*2*18000*1.6)))/45900)+1

Evaluating ... ...

N_q = 2.26757189542484

STEP 3: Convert Result to Output's Unit

2.26757189542484 --> No Conversion Required

FINAL ANSWER

2.26757189542484 ≈ 2.267572 <-- Bearing Capacity Factor dependent on Surcharge

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Bearing Capacity for Strip Footing for C Φ Soils » General Shear Failure » Bearing Capacity Factor Dependent on Surcharge for General Shear Failure

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< General Shear Failure Calculators

Cohesion of Soil given Net Ultimate Bearing Capacity for General Shear Failure

LaTeX Go Cohesion in Soil as Kilopascal = (Net Ultimate BC-((Effective Surcharge in KiloPascal*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Width of Footing*Unit Weight of Soil*Bearing Capacity Factor dependent on Unit Weight)))/(Bearing Capacity Factor dependent on Cohesion)

Bearing Capacity Factor Dependent on Cohesion for General Shear Failure

LaTeX Go Bearing Capacity Factor dependent on Cohesion = (Net Ultimate BC-((Effective Surcharge in KiloPascal*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Width of Footing*Unit Weight of Soil*Bearing Capacity Factor dependent on Unit Weight)))/(Cohesion in Soil as Kilopascal)

Effective Surcharge given Net Ultimate Bearing Capacity for General Shear Failure

LaTeX Go Effective Surcharge in KiloPascal = (Net Ultimate BC-((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(0.5*Width of Footing*Unit Weight of Soil*Bearing Capacity Factor dependent on Unit Weight)))/(Bearing Capacity Factor dependent on Surcharge-1)

Net Ultimate Bearing Capacity for General Shear Failure

LaTeX Go Net Ultimate BC = (Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge in KiloPascal*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Width of Footing*Unit Weight of Soil*Bearing Capacity Factor dependent on Unit Weight)

Bearing Capacity Factor Dependent on Surcharge for General Shear Failure Formula

LaTeX Go

What is Bearing Capacity Factor?

Bearing Capacity is the ability of the underlying soil to support the foundation loads without shear failure. Bearing capacity factors are empirically derived factors used in a bearing capacity equation that usually correlates with the angle of internal friction of the soil.

How to Calculate Bearing Capacity Factor Dependent on Surcharge for General Shear Failure?

Bearing Capacity Factor Dependent on Surcharge for General Shear Failure calculator uses Bearing Capacity Factor dependent on Surcharge = ((Net Ultimate BC-((Cohesion in Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Width of Footing*Unit Weight of Soil*Bearing Capacity Factor dependent on Unit Weight)))/Effective Surcharge in KiloPascal)+1 to calculate the Bearing Capacity Factor dependent on Surcharge, The Bearing Capacity Factor Dependent on Surcharge for General Shear Failure is defined as the value of bearing capacity factor dependent on surcharge when we have prior information of other parameters used. Bearing Capacity Factor dependent on Surcharge is denoted by N_q symbol.

How to calculate Bearing Capacity Factor Dependent on Surcharge for General Shear Failure using this online calculator? To use this online calculator for Bearing Capacity Factor Dependent on Surcharge for General Shear Failure, enter Net Ultimate BC (q_nu), Cohesion in Soil (c), Bearing Capacity Factor dependent on Cohesion (N_c), Width of Footing (B), Unit Weight of Soil (γ), Bearing Capacity Factor dependent on Unit Weight (N_γ) & Effective Surcharge in KiloPascal (σ_s) and hit the calculate button. Here is how the Bearing Capacity Factor Dependent on Surcharge for General Shear Failure calculation can be explained with given input values -> 2.267572 = ((87000-((2.05*9)+(0.5*2*18000*1.6)))/45900)+1.

FAQ

What is Bearing Capacity Factor Dependent on Surcharge for General Shear Failure?

The Bearing Capacity Factor Dependent on Surcharge for General Shear Failure is defined as the value of bearing capacity factor dependent on surcharge when we have prior information of other parameters used and is represented as N_q = ((q_nu-((c*N_c)+(0.5*B*γ*N_γ)))/σ_s)+1 or Bearing Capacity Factor dependent on Surcharge = ((Net Ultimate BC-((Cohesion in Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Width of Footing*Unit Weight of Soil*Bearing Capacity Factor dependent on Unit Weight)))/Effective Surcharge in KiloPascal)+1. Net Ultimate BC is the minimum net pressure intensity causing shear failure, Cohesion in Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil, Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil, Width of Footing is the shorter dimension of the footing, Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil, Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil & Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.

How to calculate Bearing Capacity Factor Dependent on Surcharge for General Shear Failure?

The Bearing Capacity Factor Dependent on Surcharge for General Shear Failure is defined as the value of bearing capacity factor dependent on surcharge when we have prior information of other parameters used is calculated using Bearing Capacity Factor dependent on Surcharge = ((Net Ultimate BC-((Cohesion in Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Width of Footing*Unit Weight of Soil*Bearing Capacity Factor dependent on Unit Weight)))/Effective Surcharge in KiloPascal)+1. To calculate Bearing Capacity Factor Dependent on Surcharge for General Shear Failure, you need Net Ultimate BC (q_nu), Cohesion in Soil (c), Bearing Capacity Factor dependent on Cohesion (N_c), Width of Footing (B), Unit Weight of Soil (γ), Bearing Capacity Factor dependent on Unit Weight (N_γ) & Effective Surcharge in KiloPascal (σ_s). With our tool, you need to enter the respective value for Net Ultimate BC, Cohesion in Soil, Bearing Capacity Factor dependent on Cohesion, Width of Footing, Unit Weight of Soil, Bearing Capacity Factor dependent on Unit Weight & Effective Surcharge in KiloPascal and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search