Bearing Capacity for Square Footing Calculator

✖Cohesion is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.ⓘ Cohesion [C]			+10% -10%
✖Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.ⓘ Bearing Capacity Factor dependent on Cohesion [N_c]			+10% -10%
✖Effective Surcharge also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.ⓘ Effective Surcharge [σ']			+10% -10%
✖Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.ⓘ Bearing Capacity Factor dependent on Surcharge [N_q]			+10% -10%
✖Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.ⓘ Unit Weight of Soil [γ]			+10% -10%
✖Width of Footing is the shorter dimension of the footing.ⓘ Width of Footing [B]			+10% -10%
✖Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.ⓘ Bearing Capacity Factor dependent on Unit Weight [N_γ]			+10% -10%

✖Bearing Capacity for Square Footing is the maximum load per unit area that the soil can support without experiencing shear failure, subjected to load applied by square footing.ⓘ Bearing Capacity for Square Footing [q_square]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Bearing Capacity of Soil by Terzaghi's Analysis Formulas PDF PDF Image

Bearing Capacity for Square Footing Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bearing Capacity for Square Footing = (1.3*Cohesion*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*0.8)
q_square = (1.3*C*N_c)+(σ'*N_q)+(0.5*γ*B*N_γ*0.8)
This formula uses 8 Variables

Variables Used

Bearing Capacity for Square Footing - (Measured in Pascal) - Bearing Capacity for Square Footing is the maximum load per unit area that the soil can support without experiencing shear failure, subjected to load applied by square footing.
Cohesion - (Measured in Pascal) - Cohesion is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.
Bearing Capacity Factor dependent on Cohesion - Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.
Effective Surcharge - (Measured in Pascal) - Effective Surcharge also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.
Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Width of Footing - (Measured in Meter) - Width of Footing is the shorter dimension of the footing.
Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.

STEP 1: Convert Input(s) to Base Unit

Cohesion: 4.23 Kilopascal --> 4230 Pascal (Check conversion here)
Bearing Capacity Factor dependent on Cohesion: 1.93 --> No Conversion Required
Effective Surcharge: 10 Pascal --> 10 Pascal No Conversion Required
Bearing Capacity Factor dependent on Surcharge: 2.01 --> No Conversion Required
Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18000 Newton per Cubic Meter (Check conversion here)
Width of Footing: 2 Meter --> 2 Meter No Conversion Required
Bearing Capacity Factor dependent on Unit Weight: 1.6 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

q_square = (1.3*C*N_c)+(σ'*N_q)+(0.5*γ*B*N_γ*0.8) --> (1.3*4230*1.93)+(10*2.01)+(0.5*18000*2*1.6*0.8)

Evaluating ... ...

q_square = 33673.17

STEP 3: Convert Result to Output's Unit

33673.17 Pascal -->33.67317 Kilopascal (Check conversion here)

FINAL ANSWER

33.67317 Kilopascal <-- Bearing Capacity for Square Footing

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Bearing Capacity of Soil by Terzaghi's Analysis » Specialization of Terzaghi's Equations » Bearing Capacity for Square Footing

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Specialization of Terzaghi's Equations Calculators

Bearing Capacity Factor Dependent on Cohesion

LaTeX Go Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight)))/(Shape Factor dependent on Cohesion*Cohesion)

Cohesion of Soil depending on Shape Factors

LaTeX Go Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight)))/(Shape Factor dependent on Cohesion*Bearing Capacity Factor dependent on Cohesion)

Shape Factor Dependent on Cohesion

LaTeX Go Shape Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight)))/(Bearing Capacity Factor dependent on Cohesion*Cohesion)

Bearing Capacity depending on Shape Factors

LaTeX Go Bearing Capacity = (Shape Factor dependent on Cohesion*Cohesion*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge (KN/m2)*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight)

Bearing Capacity for Square Footing Formula

LaTeX Go

What is Footing?

Footings are an important part of foundation construction. They are typically made of concrete with rebar reinforcement that has been poured into an excavated trench. The purpose of footings is to support the foundation and prevent settling. Footings are especially important in areas with troublesome soils.

How to Calculate Bearing Capacity for Square Footing?

Bearing Capacity for Square Footing calculator uses Bearing Capacity for Square Footing = (1.3*Cohesion*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*0.8) to calculate the Bearing Capacity for Square Footing, The Bearing Capacity for Square Footing formula is defined as the value of the maximum load per unit area that a foundation soil can support without experiencing shear failure for square footing. Bearing Capacity for Square Footing is denoted by q_square symbol.

How to calculate Bearing Capacity for Square Footing using this online calculator? To use this online calculator for Bearing Capacity for Square Footing, enter Cohesion (C), Bearing Capacity Factor dependent on Cohesion (N_c), Effective Surcharge (σ'), Bearing Capacity Factor dependent on Surcharge (N_q), Unit Weight of Soil (γ), Width of Footing (B) & Bearing Capacity Factor dependent on Unit Weight (N_γ) and hit the calculate button. Here is how the Bearing Capacity for Square Footing calculation can be explained with given input values -> 0.033673 = (1.3*4230*1.93)+(10*2.01)+(0.5*18000*2*1.6*0.8).

FAQ

What is Bearing Capacity for Square Footing?

The Bearing Capacity for Square Footing formula is defined as the value of the maximum load per unit area that a foundation soil can support without experiencing shear failure for square footing and is represented as q_square = (1.3*C*N_c)+(σ'*N_q)+(0.5*γ*B*N_γ*0.8) or Bearing Capacity for Square Footing = (1.3*Cohesion*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*0.8). Cohesion is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil, Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil, Effective Surcharge also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure, Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge, Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil, Width of Footing is the shorter dimension of the footing & Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.

How to calculate Bearing Capacity for Square Footing?

The Bearing Capacity for Square Footing formula is defined as the value of the maximum load per unit area that a foundation soil can support without experiencing shear failure for square footing is calculated using Bearing Capacity for Square Footing = (1.3*Cohesion*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*0.8). To calculate Bearing Capacity for Square Footing, you need Cohesion (C), Bearing Capacity Factor dependent on Cohesion (N_c), Effective Surcharge (σ'), Bearing Capacity Factor dependent on Surcharge (N_q), Unit Weight of Soil (γ), Width of Footing (B) & Bearing Capacity Factor dependent on Unit Weight (N_γ). With our tool, you need to enter the respective value for Cohesion, Bearing Capacity Factor dependent on Cohesion, Effective Surcharge, Bearing Capacity Factor dependent on Surcharge, Unit Weight of Soil, Width of Footing & Bearing Capacity Factor dependent on Unit Weight and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search