Bearing capacity for Local Shear Failure Calculator

✖Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.ⓘ Cohesion of Soil [C_s]			+10% -10%
✖Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.ⓘ Bearing Capacity Factor dependent on Cohesion [N_c]			+10% -10%
✖Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.ⓘ Effective Surcharge in KiloPascal [σ_s]			+10% -10%
✖Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.ⓘ Bearing Capacity Factor dependent on Surcharge [N_q]			+10% -10%
✖Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.ⓘ Unit Weight of Soil [γ]			+10% -10%
✖Width of Footing is the shorter dimension of the footing.ⓘ Width of Footing [B]			+10% -10%
✖Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.ⓘ Bearing Capacity Factor dependent on Unit Weight [N_γ]			+10% -10%

✖The Ultimate Bearing Capacity is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.ⓘ Bearing capacity for Local Shear Failure [q_f]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Terzaghi's Analysis Shear Failure Theories Formula PDF PDF Image

Bearing capacity for Local Shear Failure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Ultimate Bearing Capacity = ((2/3)*Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)
q_f = ((2/3)*C_s*N_c)+(σ_s*N_q)+(0.5*γ*B*N_γ)
This formula uses 8 Variables

Variables Used

Ultimate Bearing Capacity - (Measured in Pascal) - The Ultimate Bearing Capacity is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.
Cohesion of Soil - (Measured in Pascal) - Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.
Bearing Capacity Factor dependent on Cohesion - Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.
Effective Surcharge in KiloPascal - (Measured in Pascal) - Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.
Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Width of Footing - (Measured in Meter) - Width of Footing is the shorter dimension of the footing.
Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.

STEP 1: Convert Input(s) to Base Unit

Cohesion of Soil: 5 Kilopascal --> 5000 Pascal (Check conversion here)
Bearing Capacity Factor dependent on Cohesion: 9 --> No Conversion Required
Effective Surcharge in KiloPascal: 45.9 Kilonewton per Square Meter --> 45900 Pascal (Check conversion here)
Bearing Capacity Factor dependent on Surcharge: 2.01 --> No Conversion Required
Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18000 Newton per Cubic Meter (Check conversion here)
Width of Footing: 2 Meter --> 2 Meter No Conversion Required
Bearing Capacity Factor dependent on Unit Weight: 1.6 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

q_f = ((2/3)*C_s*N_c)+(σ_s*N_q)+(0.5*γ*B*N_γ) --> ((2/3)*5000*9)+(45900*2.01)+(0.5*18000*2*1.6)

Evaluating ... ...

q_f = 151059

STEP 3: Convert Result to Output's Unit

151059 Pascal -->151.059 Kilopascal (Check conversion here)

FINAL ANSWER

151.059 Kilopascal <-- Ultimate Bearing Capacity

(Calculation completed in 00.013 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Terzaghi's Analysis Shear Failure Theories » General and Local Shear Failure » Bearing capacity for Local Shear Failure

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< General and Local Shear Failure Calculators

Mobilised Angle of Shearing Resistance Corresponding to Local Shear Failure

LaTeX Go Angle of Mobilized Friction = atan((2/3)*tan((Angle of Shearing Resistance)))

Angle of Shearing Resistance Corresponding to Local Shear Failure

LaTeX Go Angle of Shearing Resistance = atan((3/2)*tan((Angle of Mobilized Friction)))

Cohesion of Soil given Mobilised Cohesion Corresponding to Local Shear Failure

LaTeX Go Cohesion of Soil = (3/2)*Mobilised Cohesion

Mobilised Cohesion Corresponding to Local Shear Failure

LaTeX Go Mobilised Cohesion = (2/3)*Cohesion of Soil

Bearing capacity for Local Shear Failure Formula

LaTeX Go

What is Local Shear Failure?

Failure in which the ultimate shearing strength of the soil is mobilized only locally along the potential surface of sliding at the time the structure supported by the soil is impaired by excessive movement.

How to Calculate Bearing capacity for Local Shear Failure?

Bearing capacity for Local Shear Failure calculator uses Ultimate Bearing Capacity = ((2/3)*Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight) to calculate the Ultimate Bearing Capacity, The Bearing capacity for Local Shear Failure is defined as soil strength against local shear failure, indicating the maximum load before shear failure occurs in soil. Ultimate Bearing Capacity is denoted by q_f symbol.

How to calculate Bearing capacity for Local Shear Failure using this online calculator? To use this online calculator for Bearing capacity for Local Shear Failure, enter Cohesion of Soil (C_s), Bearing Capacity Factor dependent on Cohesion (N_c), Effective Surcharge in KiloPascal (σ_s), Bearing Capacity Factor dependent on Surcharge (N_q), Unit Weight of Soil (γ), Width of Footing (B) & Bearing Capacity Factor dependent on Unit Weight (N_γ) and hit the calculate button. Here is how the Bearing capacity for Local Shear Failure calculation can be explained with given input values -> 0.1506 = ((2/3)*5000*9)+(45900*2.01)+(0.5*18000*2*1.6).

FAQ

What is Bearing capacity for Local Shear Failure?

The Bearing capacity for Local Shear Failure is defined as soil strength against local shear failure, indicating the maximum load before shear failure occurs in soil and is represented as q_f = ((2/3)*C_s*N_c)+(σ_s*N_q)+(0.5*γ*B*N_γ) or Ultimate Bearing Capacity = ((2/3)*Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight). Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil, Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil, Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure, Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge, Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil, Width of Footing is the shorter dimension of the footing & Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.

How to calculate Bearing capacity for Local Shear Failure?

The Bearing capacity for Local Shear Failure is defined as soil strength against local shear failure, indicating the maximum load before shear failure occurs in soil is calculated using Ultimate Bearing Capacity = ((2/3)*Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight). To calculate Bearing capacity for Local Shear Failure, you need Cohesion of Soil (C_s), Bearing Capacity Factor dependent on Cohesion (N_c), Effective Surcharge in KiloPascal (σ_s), Bearing Capacity Factor dependent on Surcharge (N_q), Unit Weight of Soil (γ), Width of Footing (B) & Bearing Capacity Factor dependent on Unit Weight (N_γ). With our tool, you need to enter the respective value for Cohesion of Soil, Bearing Capacity Factor dependent on Cohesion, Effective Surcharge in KiloPascal, Bearing Capacity Factor dependent on Surcharge, Unit Weight of Soil, Width of Footing & Bearing Capacity Factor dependent on Unit Weight and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Ultimate Bearing Capacity?

In this formula, Ultimate Bearing Capacity uses Cohesion of Soil, Bearing Capacity Factor dependent on Cohesion, Effective Surcharge in KiloPascal, Bearing Capacity Factor dependent on Surcharge, Unit Weight of Soil, Width of Footing & Bearing Capacity Factor dependent on Unit Weight. We can use 1 other way(s) to calculate the same, which is/are as follows -

Ultimate Bearing Capacity = ((2/3)*Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+((Unit Weight of Soil*Depth of Footing)*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)

Home

FREE PDFs

🔍 Search