Bearing Capacity Factor Dependent on Unit Weight for Rectangular Footing Solution

STEP 0: Pre-Calculation Summary
Formula Used
Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity in Soil-(((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)*(1+0.3*(Width of Footing/Length of Footing)))+(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)))/(0.4*Width of Footing*Unit Weight of Soil)
Nγ = (qfc-(((C*Nc)*(1+0.3*(B/L)))+(σs*Nq)))/(0.4*B*γ)
This formula uses 9 Variables
Variables Used
Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.
Ultimate Bearing Capacity in Soil - (Measured in Pascal) - Ultimate Bearing Capacity in Soil is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.
Cohesion in Soil as Kilopascal - (Measured in Pascal) - Cohesion in Soil as Kilopascal is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.
Bearing Capacity Factor dependent on Cohesion - Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.
Width of Footing - (Measured in Meter) - Width of Footing is the shorter dimension of the footing.
Length of Footing - (Measured in Meter) - Length of Footing is the length of the larger dimension of the footing.
Effective Surcharge in KiloPascal - (Measured in Pascal) - Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.
Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
STEP 1: Convert Input(s) to Base Unit
Ultimate Bearing Capacity in Soil: 127.8 Kilopascal --> 127800 Pascal (Check conversion ​here)
Cohesion in Soil as Kilopascal: 1.27 Kilopascal --> 1270 Pascal (Check conversion ​here)
Bearing Capacity Factor dependent on Cohesion: 9 --> No Conversion Required
Width of Footing: 2 Meter --> 2 Meter No Conversion Required
Length of Footing: 4 Meter --> 4 Meter No Conversion Required
Effective Surcharge in KiloPascal: 45.9 Kilonewton per Square Meter --> 45900 Pascal (Check conversion ​here)
Bearing Capacity Factor dependent on Surcharge: 2.01 --> No Conversion Required
Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18000 Newton per Cubic Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Nγ = (qfc-(((C*Nc)*(1+0.3*(B/L)))+(σs*Nq)))/(0.4*B*γ) --> (127800-(((1270*9)*(1+0.3*(2/4)))+(45900*2.01)))/(0.4*2*18000)
Evaluating ... ...
Nγ = 1.5553125
STEP 3: Convert Result to Output's Unit
1.5553125 --> No Conversion Required
FINAL ANSWER
1.5553125 1.555313 <-- Bearing Capacity Factor dependent on Unit Weight
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2100+ more calculators!
Verifier Image
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

Frictional Cohesive Soil Calculators

Cohesion of Soil given Ultimate Bearing Capacity for Rectangular Footing
​ LaTeX ​ Go Cohesion in Soil as Kilopascal = (Ultimate Bearing Capacity in Soil-((Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.4*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/((Bearing Capacity Factor dependent on Cohesion)*(1+0.3*(Width of Footing/Length of Footing)))
Bearing Capacity Factor Dependent on Cohesion for Rectangular Footing
​ LaTeX ​ Go Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity in Soil-((Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.4*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/((Cohesion in Soil as Kilopascal)*(1+0.3*(Width of Footing/Length of Footing)))
Effective Surcharge for Rectangular Footing
​ LaTeX ​ Go Effective Surcharge in KiloPascal = (Ultimate Bearing Capacity in Soil-(((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)*(1+0.3*(Width of Footing/Length of Footing)))+(0.4*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Bearing Capacity Factor dependent on Surcharge
Ultimate Bearing Capacity for Rectangular Footing
​ LaTeX ​ Go Ultimate Bearing Capacity in Soil = ((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)*(1+0.3*(Width of Footing/Length of Footing)))+(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.4*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)

Bearing Capacity Factor Dependent on Unit Weight for Rectangular Footing Formula

​LaTeX ​Go
Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity in Soil-(((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)*(1+0.3*(Width of Footing/Length of Footing)))+(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)))/(0.4*Width of Footing*Unit Weight of Soil)
Nγ = (qfc-(((C*Nc)*(1+0.3*(B/L)))+(σs*Nq)))/(0.4*B*γ)

What is Bearing Capacity?

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the maximum average contact pressure between the foundation and the soil which should not produce shear failure in the soil.

How to Calculate Bearing Capacity Factor Dependent on Unit Weight for Rectangular Footing?

Bearing Capacity Factor Dependent on Unit Weight for Rectangular Footing calculator uses Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity in Soil-(((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)*(1+0.3*(Width of Footing/Length of Footing)))+(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)))/(0.4*Width of Footing*Unit Weight of Soil) to calculate the Bearing Capacity Factor dependent on Unit Weight, The Bearing Capacity Factor Dependent on Unit Weight for Rectangular Footing is defined as the value of bearing capacity factor dependent on the unit weight when we have prior information of other parameters used. Bearing Capacity Factor dependent on Unit Weight is denoted by Nγ symbol.

How to calculate Bearing Capacity Factor Dependent on Unit Weight for Rectangular Footing using this online calculator? To use this online calculator for Bearing Capacity Factor Dependent on Unit Weight for Rectangular Footing, enter Ultimate Bearing Capacity in Soil (qfc), Cohesion in Soil as Kilopascal (C), Bearing Capacity Factor dependent on Cohesion (Nc), Width of Footing (B), Length of Footing (L), Effective Surcharge in KiloPascal s), Bearing Capacity Factor dependent on Surcharge (Nq) & Unit Weight of Soil (γ) and hit the calculate button. Here is how the Bearing Capacity Factor Dependent on Unit Weight for Rectangular Footing calculation can be explained with given input values -> 1.587188 = (127800-(((1270*9)*(1+0.3*(2/4)))+(45900*2.01)))/(0.4*2*18000).

FAQ

What is Bearing Capacity Factor Dependent on Unit Weight for Rectangular Footing?
The Bearing Capacity Factor Dependent on Unit Weight for Rectangular Footing is defined as the value of bearing capacity factor dependent on the unit weight when we have prior information of other parameters used and is represented as Nγ = (qfc-(((C*Nc)*(1+0.3*(B/L)))+(σs*Nq)))/(0.4*B*γ) or Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity in Soil-(((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)*(1+0.3*(Width of Footing/Length of Footing)))+(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)))/(0.4*Width of Footing*Unit Weight of Soil). Ultimate Bearing Capacity in Soil is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear, Cohesion in Soil as Kilopascal is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil, Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil, Width of Footing is the shorter dimension of the footing, Length of Footing is the length of the larger dimension of the footing, Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure, Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge & Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
How to calculate Bearing Capacity Factor Dependent on Unit Weight for Rectangular Footing?
The Bearing Capacity Factor Dependent on Unit Weight for Rectangular Footing is defined as the value of bearing capacity factor dependent on the unit weight when we have prior information of other parameters used is calculated using Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity in Soil-(((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)*(1+0.3*(Width of Footing/Length of Footing)))+(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)))/(0.4*Width of Footing*Unit Weight of Soil). To calculate Bearing Capacity Factor Dependent on Unit Weight for Rectangular Footing, you need Ultimate Bearing Capacity in Soil (qfc), Cohesion in Soil as Kilopascal (C), Bearing Capacity Factor dependent on Cohesion (Nc), Width of Footing (B), Length of Footing (L), Effective Surcharge in KiloPascal s), Bearing Capacity Factor dependent on Surcharge (Nq) & Unit Weight of Soil (γ). With our tool, you need to enter the respective value for Ultimate Bearing Capacity in Soil, Cohesion in Soil as Kilopascal, Bearing Capacity Factor dependent on Cohesion, Width of Footing, Length of Footing, Effective Surcharge in KiloPascal, Bearing Capacity Factor dependent on Surcharge & Unit Weight of Soil and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Bearing Capacity Factor dependent on Unit Weight?
In this formula, Bearing Capacity Factor dependent on Unit Weight uses Ultimate Bearing Capacity in Soil, Cohesion in Soil as Kilopascal, Bearing Capacity Factor dependent on Cohesion, Width of Footing, Length of Footing, Effective Surcharge in KiloPascal, Bearing Capacity Factor dependent on Surcharge & Unit Weight of Soil. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity in Soil-(((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)*(1+0.3*(Width of Footing/Length of Footing)))+(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)))/((0.5*Width of Footing*Unit Weight of Soil)*(1-0.2*(Width of Footing/Length of Footing)))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!