Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil Calculator

✖Ultimate Bearing Capacity in Soil is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.ⓘ Ultimate Bearing Capacity in Soil [q_fc]			+10% -10%
✖Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.ⓘ Effective Surcharge in KiloPascal [σ_s]			+10% -10%
✖Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.ⓘ Bearing Capacity Factor dependent on Surcharge [N_q]			+10% -10%
✖Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.ⓘ Cohesion of Soil [C_s]			+10% -10%

✖Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.ⓘ Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil [N_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Terzaghi's Analysis Purely Cohesive Soil Formulas PDF PDF Image

Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity in Soil-((Effective Surcharge in KiloPascal)*Bearing Capacity Factor dependent on Surcharge))/Cohesion of Soil
N_c = (q_fc-((σ_s)*N_q))/C_s
This formula uses 5 Variables

Variables Used

Bearing Capacity Factor dependent on Cohesion - Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.
Ultimate Bearing Capacity in Soil - (Measured in Pascal) - Ultimate Bearing Capacity in Soil is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.
Effective Surcharge in KiloPascal - (Measured in Pascal) - Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.
Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Cohesion of Soil - (Measured in Pascal) - Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.

STEP 1: Convert Input(s) to Base Unit

Ultimate Bearing Capacity in Soil: 127.8 Kilopascal --> 127800 Pascal (Check conversion here)
Effective Surcharge in KiloPascal: 45.9 Kilonewton per Square Meter --> 45900 Pascal (Check conversion here)
Bearing Capacity Factor dependent on Surcharge: 2.01 --> No Conversion Required
Cohesion of Soil: 5 Kilopascal --> 5000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

N_c = (q_fc-((σ_s)*N_q))/C_s --> (127800-((45900)*2.01))/5000

Evaluating ... ...

N_c = 7.1082

STEP 3: Convert Result to Output's Unit

7.1082 --> No Conversion Required

FINAL ANSWER

7.1082 <-- Bearing Capacity Factor dependent on Cohesion

(Calculation completed in 00.005 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Terzaghi's Analysis Shear Failure Theories » Terzaghi's Analysis Purely Cohesive Soil » Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Terzaghi's Analysis Purely Cohesive Soil Calculators

Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil

LaTeX Go Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity in Soil-((Effective Surcharge in KiloPascal)*Bearing Capacity Factor dependent on Surcharge))/Cohesion of Soil

Cohesion of Soil given Bearing Capacity for Purely Cohesive Soil

LaTeX Go Cohesion of Soil = (Ultimate Bearing Capacity in Soil-(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge))/Bearing Capacity Factor dependent on Cohesion

Bearing Capacity for Purely Cohesive Soil

LaTeX Go Ultimate Bearing Capacity = ((Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge))

Effective Surcharge given Bearing Capacity for Purely Cohesive Soil

LaTeX Go Effective Surcharge in KiloPascal = (Ultimate Bearing Capacity-(Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion))/Bearing Capacity Factor dependent on Surcharge

Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil Formula

LaTeX Go

What is Bearing Capacity?

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the maximum average contact pressure between the foundation and the soil which should not produce shear failure in the soil.

How to Calculate Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil?

Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil calculator uses Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity in Soil-((Effective Surcharge in KiloPascal)*Bearing Capacity Factor dependent on Surcharge))/Cohesion of Soil to calculate the Bearing Capacity Factor dependent on Cohesion, The Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil is defined as bearing capacity factor in purely cohesive soil depends on cohesion, representing the soil's ability to support loads. Bearing Capacity Factor dependent on Cohesion is denoted by N_c symbol.

How to calculate Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil using this online calculator? To use this online calculator for Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil, enter Ultimate Bearing Capacity in Soil (q_fc), Effective Surcharge in KiloPascal (σ_s), Bearing Capacity Factor dependent on Surcharge (N_q) & Cohesion of Soil (C_s) and hit the calculate button. Here is how the Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil calculation can be explained with given input values -> 7.2 = (127800-((45900)*2.01))/5000.

FAQ

What is Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil?

The Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil is defined as bearing capacity factor in purely cohesive soil depends on cohesion, representing the soil's ability to support loads and is represented as N_c = (q_fc-((σ_s)*N_q))/C_s or Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity in Soil-((Effective Surcharge in KiloPascal)*Bearing Capacity Factor dependent on Surcharge))/Cohesion of Soil. Ultimate Bearing Capacity in Soil is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear, Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure, Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge & Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.

How to calculate Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil?

The Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil is defined as bearing capacity factor in purely cohesive soil depends on cohesion, representing the soil's ability to support loads is calculated using Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity in Soil-((Effective Surcharge in KiloPascal)*Bearing Capacity Factor dependent on Surcharge))/Cohesion of Soil. To calculate Bearing Capacity Factor Dependent on cohesion for Purely Cohesive Soil, you need Ultimate Bearing Capacity in Soil (q_fc), Effective Surcharge in KiloPascal (σ_s), Bearing Capacity Factor dependent on Surcharge (N_q) & Cohesion of Soil (C_s). With our tool, you need to enter the respective value for Ultimate Bearing Capacity in Soil, Effective Surcharge in KiloPascal, Bearing Capacity Factor dependent on Surcharge & Cohesion of Soil and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Bearing Capacity Factor dependent on Cohesion?

In this formula, Bearing Capacity Factor dependent on Cohesion uses Ultimate Bearing Capacity in Soil, Effective Surcharge in KiloPascal, Bearing Capacity Factor dependent on Surcharge & Cohesion of Soil. We can use 2 other way(s) to calculate the same, which is/are as follows -

Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Unit Weight of Soil*Depth of Footing)*Bearing Capacity Factor dependent on Surcharge))/Cohesion of Soil
Bearing Capacity Factor dependent on Cohesion = (Bearing Capacity Factor dependent on Surcharge-1)*cot((Angle of Shearing Resistance))

Home

FREE PDFs

🔍 Search