Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge Calculator

✖Net Ultimate Bearing Capacity is the minimum net pressure intensity causing shear failure.ⓘ Net Ultimate Bearing Capacity [q_nf]			+10% -10%
✖Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.ⓘ Cohesion of Soil [C_s]			+10% -10%
✖Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.ⓘ Bearing Capacity Factor dependent on Cohesion [N_c]			+10% -10%
✖Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.ⓘ Unit Weight of Soil [γ]			+10% -10%
✖Width of Footing is the shorter dimension of the footing.ⓘ Width of Footing [B]			+10% -10%
✖Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.ⓘ Bearing Capacity Factor dependent on Unit Weight [N_γ]			+10% -10%
✖Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.ⓘ Effective Surcharge in KiloPascal [σ_s]			+10% -10%

✖Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.ⓘ Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge [N_q]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Terzaghi's Analysis Shear Failure Theories Formula PDF PDF Image

Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bearing Capacity Factor dependent on Surcharge = ((Net Ultimate Bearing Capacity-((Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Effective Surcharge in KiloPascal)+1
N_q = ((q_nf-((C_s*N_c)+(0.5*γ*B*N_γ)))/σ_s)+1
This formula uses 8 Variables

Variables Used

Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Net Ultimate Bearing Capacity - (Measured in Kilonewton per Square Meter) - Net Ultimate Bearing Capacity is the minimum net pressure intensity causing shear failure.
Cohesion of Soil - (Measured in Kilonewton per Square Meter) - Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.
Bearing Capacity Factor dependent on Cohesion - Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.
Unit Weight of Soil - (Measured in Kilonewton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Width of Footing - (Measured in Meter) - Width of Footing is the shorter dimension of the footing.
Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.
Effective Surcharge in KiloPascal - (Measured in Kilonewton per Square Meter) - Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.

STEP 1: Convert Input(s) to Base Unit

Net Ultimate Bearing Capacity: 150 Kilonewton per Square Meter --> 150 Kilonewton per Square Meter No Conversion Required
Cohesion of Soil: 5 Kilopascal --> 5 Kilonewton per Square Meter (Check conversion here)
Bearing Capacity Factor dependent on Cohesion: 9 --> No Conversion Required
Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18 Kilonewton per Cubic Meter No Conversion Required
Width of Footing: 2 Meter --> 2 Meter No Conversion Required
Bearing Capacity Factor dependent on Unit Weight: 1.6 --> No Conversion Required
Effective Surcharge in KiloPascal: 45.9 Kilonewton per Square Meter --> 45.9 Kilonewton per Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

N_q = ((q_nf-((C_s*N_c)+(0.5*γ*B*N_γ)))/σ_s)+1 --> ((150-((5*9)+(0.5*18*2*1.6)))/45.9)+1

Evaluating ... ...

N_q = 2.66013071895425

STEP 3: Convert Result to Output's Unit

2.66013071895425 --> No Conversion Required

FINAL ANSWER

2.66013071895425 ≈ 2.660131 <-- Bearing Capacity Factor dependent on Surcharge

(Calculation completed in 00.021 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Terzaghi's Analysis Shear Failure Theories » Bearing Capacity Factors » Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Bearing Capacity Factors Calculators

Bearing Capacity Factor Dependent on Surcharge given Ultimate Bearing Capacity

LaTeX Go Bearing Capacity Factor dependent on Surcharge = (Ultimate Bearing Capacity in Soil-((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/(Unit Weight of Soil*Depth of Footing in Soil)

Bearing Capacity Factor Dependent on Weight given Ultimate Bearing Capacity

LaTeX Go Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity in Soil-((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Unit Weight of Soil*Depth of Footing in Soil*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Unit Weight of Soil*Width of Footing)

Bearing Capacity Factor Dependent on Cohesion given Ultimate Bearing Capacity

LaTeX Go Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity in Soil-((Unit Weight of Soil*Depth of Footing in Soil*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Cohesion in Soil as Kilopascal

Bearing Capacity Factor Dependent on Cohesion given Effective Surcharge

LaTeX Go Bearing Capacity Factor dependent on Cohesion = (Net Ultimate Bearing Capacity-((Effective Surcharge in KiloPascal*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Cohesion of Soil

Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge Formula

LaTeX Go

What is Surcharge?

A surcharge load, typically consisting of fill material, placed on the design platform. This surcharge load, together with the platform fill, exerts pressures on the underlying soft soil and creates development of excess pore water pressures that are slow to dissipate due to the low permeability of these soft soils.

How to Calculate Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge?

Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge calculator uses Bearing Capacity Factor dependent on Surcharge = ((Net Ultimate Bearing Capacity-((Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Effective Surcharge in KiloPascal)+1 to calculate the Bearing Capacity Factor dependent on Surcharge, The Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge is defined as the bearing capacity factor varies based on surcharge load. Effective surcharge refers to additional loads influencing soil strength and stability. Bearing Capacity Factor dependent on Surcharge is denoted by N_q symbol.

How to calculate Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge using this online calculator? To use this online calculator for Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge, enter Net Ultimate Bearing Capacity (q_nf), Cohesion of Soil (C_s), Bearing Capacity Factor dependent on Cohesion (N_c), Unit Weight of Soil (γ), Width of Footing (B), Bearing Capacity Factor dependent on Unit Weight (N_γ) & Effective Surcharge in KiloPascal (σ_s) and hit the calculate button. Here is how the Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge calculation can be explained with given input values -> 2.660131 = ((150000-((5000*9)+(0.5*18000*2*1.6)))/45900)+1.

FAQ

What is Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge?

The Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge is defined as the bearing capacity factor varies based on surcharge load. Effective surcharge refers to additional loads influencing soil strength and stability and is represented as N_q = ((q_nf-((C_s*N_c)+(0.5*γ*B*N_γ)))/σ_s)+1 or Bearing Capacity Factor dependent on Surcharge = ((Net Ultimate Bearing Capacity-((Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Effective Surcharge in KiloPascal)+1. Net Ultimate Bearing Capacity is the minimum net pressure intensity causing shear failure, Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil, Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil, Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil, Width of Footing is the shorter dimension of the footing, Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil & Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.

How to calculate Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge?

The Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge is defined as the bearing capacity factor varies based on surcharge load. Effective surcharge refers to additional loads influencing soil strength and stability is calculated using Bearing Capacity Factor dependent on Surcharge = ((Net Ultimate Bearing Capacity-((Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Effective Surcharge in KiloPascal)+1. To calculate Bearing Capacity Factor Dependent on Surcharge given Effective Surcharge, you need Net Ultimate Bearing Capacity (q_nf), Cohesion of Soil (C_s), Bearing Capacity Factor dependent on Cohesion (N_c), Unit Weight of Soil (γ), Width of Footing (B), Bearing Capacity Factor dependent on Unit Weight (N_γ) & Effective Surcharge in KiloPascal (σ_s). With our tool, you need to enter the respective value for Net Ultimate Bearing Capacity, Cohesion of Soil, Bearing Capacity Factor dependent on Cohesion, Unit Weight of Soil, Width of Footing, Bearing Capacity Factor dependent on Unit Weight & Effective Surcharge in KiloPascal and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Bearing Capacity Factor dependent on Surcharge?

In this formula, Bearing Capacity Factor dependent on Surcharge uses Net Ultimate Bearing Capacity, Cohesion of Soil, Bearing Capacity Factor dependent on Cohesion, Unit Weight of Soil, Width of Footing, Bearing Capacity Factor dependent on Unit Weight & Effective Surcharge in KiloPascal. We can use 2 other way(s) to calculate the same, which is/are as follows -

Bearing Capacity Factor dependent on Surcharge = (Ultimate Bearing Capacity in Soil-((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/(Unit Weight of Soil*Depth of Footing in Soil)
Bearing Capacity Factor dependent on Surcharge = ((((Safe Bearing Capacity*Factor of Safety)-(Factor of Safety*Effective Surcharge in KiloPascal))-((Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Effective Surcharge in KiloPascal)+1

Home

FREE PDFs

🔍 Search