Basic Load Effect given Ultimate Strength for Applied Wind Loads Calculator

✖ultimate strengths is the capacities to resist design loads and their related internal moments and forces.ⓘ Ultimate Strength [U]			+10% -10%
✖Wind Load is the load, placed on the exterior of a structure by wind.ⓘ Wind Load [W]			+10% -10%

✖Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).ⓘ Basic Load Effect given Ultimate Strength for Applied Wind Loads [DL]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Two Way Slab System and Footing Formulas PDF PDF Image

Basic Load Effect given Ultimate Strength for Applied Wind Loads Solution

STEP 0: Pre-Calculation Summary

Formula Used

Dead Load = (Ultimate Strength-(1.3*Wind Load))/(0.9)
DL = (U-(1.3*W))/(0.9)
This formula uses 3 Variables

Variables Used

Dead Load - (Measured in Kilonewton per Square Meter) - Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).
Ultimate Strength - (Measured in Kilonewton per Square Meter) - ultimate strengths is the capacities to resist design loads and their related internal moments and forces.
Wind Load - (Measured in Kilonewton per Square Meter) - Wind Load is the load, placed on the exterior of a structure by wind.

STEP 1: Convert Input(s) to Base Unit

Ultimate Strength: 20 Kilonewton per Square Meter --> 20 Kilonewton per Square Meter No Conversion Required
Wind Load: 7 Kilonewton per Square Meter --> 7 Kilonewton per Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

DL = (U-(1.3*W))/(0.9) --> (20-(1.3*7))/(0.9)

Evaluating ... ...

DL = 12.1111111111111

STEP 3: Convert Result to Output's Unit

12111.1111111111 Pascal -->12.1111111111111 Kilonewton per Square Meter (Check conversion here)

FINAL ANSWER

12.1111111111111 ≈ 12.11111 Kilonewton per Square Meter <-- Dead Load

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Structural Engineering » Concrete Structures » Design of Two Way Slab System and Footing » Partial Safety Factors for Loads » Basic Load Effect given Ultimate Strength for Applied Wind Loads

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Alithea Fernandes

Don Bosco College of Engineering (DBCE), Goa

Alithea Fernandes has verified this Calculator and 100+ more calculators!

< Partial Safety Factors for Loads Calculators

Basic Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads

LaTeX Go Dead Load = (Ultimate Strength-(1.7*Live Load))/(1.4)

Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads

LaTeX Go Live Load = (Ultimate Strength-(1.4*Dead Load))/(1.7)

Ultimate Strength when Wind and Earthquake Loads are not Applied

LaTeX Go Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load)

Ultimate Strength when Wind Loads are Applied

LaTeX Go Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load)

Basic Load Effect given Ultimate Strength for Applied Wind Loads Formula

LaTeX Go

Dead Load = (Ultimate Strength-(1.3*Wind Load))/(0.9)
DL = (U-(1.3*W))/(0.9)

What is Basic Load Effect or Dead Load?

Dead load is defined as a constant load in a structure (such as a bridge, building, or machine) that is due to the weight of the members, the supported structure, and permanent attachments or accessories.

How to Calculate Basic Load Effect given Ultimate Strength for Applied Wind Loads?

Basic Load Effect given Ultimate Strength for Applied Wind Loads calculator uses Dead Load = (Ultimate Strength-(1.3*Wind Load))/(0.9) to calculate the Dead Load, The Basic Load Effect given Ultimate Strength for Applied Wind Loads formula is defined as a constant load in a structure . Dead Load is denoted by DL symbol.

How to calculate Basic Load Effect given Ultimate Strength for Applied Wind Loads using this online calculator? To use this online calculator for Basic Load Effect given Ultimate Strength for Applied Wind Loads, enter Ultimate Strength (U) & Wind Load (W) and hit the calculate button. Here is how the Basic Load Effect given Ultimate Strength for Applied Wind Loads calculation can be explained with given input values -> 0.012111 = (20000-(1.3*7000))/(0.9).

FAQ

What is Basic Load Effect given Ultimate Strength for Applied Wind Loads?

The Basic Load Effect given Ultimate Strength for Applied Wind Loads formula is defined as a constant load in a structure and is represented as DL = (U-(1.3*W))/(0.9) or Dead Load = (Ultimate Strength-(1.3*Wind Load))/(0.9). ultimate strengths is the capacities to resist design loads and their related internal moments and forces & Wind Load is the load, placed on the exterior of a structure by wind.

How to calculate Basic Load Effect given Ultimate Strength for Applied Wind Loads?

The Basic Load Effect given Ultimate Strength for Applied Wind Loads formula is defined as a constant load in a structure is calculated using Dead Load = (Ultimate Strength-(1.3*Wind Load))/(0.9). To calculate Basic Load Effect given Ultimate Strength for Applied Wind Loads, you need Ultimate Strength (U) & Wind Load (W). With our tool, you need to enter the respective value for Ultimate Strength & Wind Load and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Dead Load?

In this formula, Dead Load uses Ultimate Strength & Wind Load. We can use 1 other way(s) to calculate the same, which is/are as follows -

Dead Load = (Ultimate Strength-(1.7*Live Load))/(1.4)

Home

FREE PDFs

🔍 Search