Base Radius of Cone given Total Surface Area and Lateral Surface Area Calculator

✖Total Surface Area of Cone is defined as the total quantity of plane enclosed on the entire surface of the Cone.ⓘ Total Surface Area of Cone [TSA]			+10% -10%
✖Lateral Surface Area of Cone is defined as the total quantity of plane enclosed on the lateral curved surface of the Cone.ⓘ Lateral Surface Area of Cone [LSA]			+10% -10%

✖Base Radius of Cone is defined as the distance between the center and any point on the circumference of the base circular surface of the Cone.ⓘ Base Radius of Cone given Total Surface Area and Lateral Surface Area [r_Base]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Cone Formula PDF PDF Image

Base Radius of Cone given Total Surface Area and Lateral Surface Area Solution

STEP 0: Pre-Calculation Summary

Formula Used

Base Radius of Cone = sqrt((Total Surface Area of Cone-Lateral Surface Area of Cone)/pi)
r_Base = sqrt((TSA-LSA)/pi)
This formula uses 1 Constants, 1 Functions, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Base Radius of Cone - (Measured in Meter) - Base Radius of Cone is defined as the distance between the center and any point on the circumference of the base circular surface of the Cone.
Total Surface Area of Cone - (Measured in Square Meter) - Total Surface Area of Cone is defined as the total quantity of plane enclosed on the entire surface of the Cone.
Lateral Surface Area of Cone - (Measured in Square Meter) - Lateral Surface Area of Cone is defined as the total quantity of plane enclosed on the lateral curved surface of the Cone.

STEP 1: Convert Input(s) to Base Unit

Total Surface Area of Cone: 665 Square Meter --> 665 Square Meter No Conversion Required
Lateral Surface Area of Cone: 350 Square Meter --> 350 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

r_Base = sqrt((TSA-LSA)/pi) --> sqrt((665-350)/pi)

Evaluating ... ...

r_Base = 10.0133717671868

STEP 3: Convert Result to Output's Unit

10.0133717671868 Meter --> No Conversion Required

FINAL ANSWER

10.0133717671868 ≈ 10.01337 Meter <-- Base Radius of Cone

(Calculation completed in 00.004 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Cone » Cone » Base Radius of Cone » Base Radius of Cone given Total Surface Area and Lateral Surface Area

Credits

Created by Dhruv Walia

Indian Institute of Technology, Indian School of Mines, DHANBAD (IIT ISM), Dhanbad, Jharkhand

Dhruv Walia has created this Calculator and 1100+ more calculators!

Verified by Nayana Phulphagar

Institute of Chartered and Financial Analysts of India National college (ICFAI National College), HUBLI

Nayana Phulphagar has verified this Calculator and 1500+ more calculators!

< Base Radius of Cone Calculators

Base Radius of Cone given Total Surface Area and Slant Height

LaTeX Go Base Radius of Cone = 1/2*(sqrt(Slant Height of Cone^2+(4*Total Surface Area of Cone)/pi)-Slant Height of Cone)

Base Radius of Cone given Volume

LaTeX Go Base Radius of Cone = sqrt((3*Volume of Cone)/(pi*Height of Cone))

Base Radius of Cone given Lateral Surface Area and Slant Height

LaTeX Go Base Radius of Cone = Lateral Surface Area of Cone/(pi*Slant Height of Cone)

Base Radius of Cone given Base Area

LaTeX Go Base Radius of Cone = sqrt(Base Area of Cone/pi)

Base Radius of Cone given Total Surface Area and Lateral Surface Area Formula

LaTeX Go

Base Radius of Cone = sqrt((Total Surface Area of Cone-Lateral Surface Area of Cone)/pi)
r_Base = sqrt((TSA-LSA)/pi)

What is a Cone?

A Cone is obtained by rotating a line inclined at a fixed acute angle from a fixed axis of rotation. The sharp tip is called the apex of the Cone. If the rotating line is crossing the axis of rotation, then the resulting shape is a double-napped Cone - two oppositely placed Cones joined on the apex. Cutting a Cone by a plane will result in some important two-dimensional shapes like circles, ellipses, parabolas, and hyperbolas, depending on the angle of cutting.

How to Calculate Base Radius of Cone given Total Surface Area and Lateral Surface Area?

Base Radius of Cone given Total Surface Area and Lateral Surface Area calculator uses Base Radius of Cone = sqrt((Total Surface Area of Cone-Lateral Surface Area of Cone)/pi) to calculate the Base Radius of Cone, The Base Radius of Cone given Total Surface Area and Lateral Surface Area formula is defined as the distance between the center and any point on the circumference of the base circular surface of the Cone, and calculated using the total surface area and lateral surface area of the Cone. Base Radius of Cone is denoted by r_Base symbol.

How to calculate Base Radius of Cone given Total Surface Area and Lateral Surface Area using this online calculator? To use this online calculator for Base Radius of Cone given Total Surface Area and Lateral Surface Area, enter Total Surface Area of Cone (TSA) & Lateral Surface Area of Cone (LSA) and hit the calculate button. Here is how the Base Radius of Cone given Total Surface Area and Lateral Surface Area calculation can be explained with given input values -> 10.01337 = sqrt((665-350)/pi).

FAQ

What is Base Radius of Cone given Total Surface Area and Lateral Surface Area?

The Base Radius of Cone given Total Surface Area and Lateral Surface Area formula is defined as the distance between the center and any point on the circumference of the base circular surface of the Cone, and calculated using the total surface area and lateral surface area of the Cone and is represented as r_Base = sqrt((TSA-LSA)/pi) or Base Radius of Cone = sqrt((Total Surface Area of Cone-Lateral Surface Area of Cone)/pi). Total Surface Area of Cone is defined as the total quantity of plane enclosed on the entire surface of the Cone & Lateral Surface Area of Cone is defined as the total quantity of plane enclosed on the lateral curved surface of the Cone.

How to calculate Base Radius of Cone given Total Surface Area and Lateral Surface Area?

The Base Radius of Cone given Total Surface Area and Lateral Surface Area formula is defined as the distance between the center and any point on the circumference of the base circular surface of the Cone, and calculated using the total surface area and lateral surface area of the Cone is calculated using Base Radius of Cone = sqrt((Total Surface Area of Cone-Lateral Surface Area of Cone)/pi). To calculate Base Radius of Cone given Total Surface Area and Lateral Surface Area, you need Total Surface Area of Cone (TSA) & Lateral Surface Area of Cone (LSA). With our tool, you need to enter the respective value for Total Surface Area of Cone & Lateral Surface Area of Cone and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Base Radius of Cone?

In this formula, Base Radius of Cone uses Total Surface Area of Cone & Lateral Surface Area of Cone. We can use 3 other way(s) to calculate the same, which is/are as follows -

Base Radius of Cone = sqrt(Base Area of Cone/pi)
Base Radius of Cone = Lateral Surface Area of Cone/(pi*Slant Height of Cone)
Base Radius of Cone = 1/2*(sqrt(Slant Height of Cone^2+(4*Total Surface Area of Cone)/pi)-Slant Height of Cone)

Home

FREE PDFs

🔍 Search