Base Flow when Possible Recharge is Considered Solution

STEP 0: Pre-Calculation Summary
Formula Used
Base Flow into the Stream from the Area = Gross Recharge due to Rainfall-Possible Recharge+Net Ground Water Flowing Outside Catchment+Recharge of Ground Water Body
B = RG-R+I+Is
This formula uses 5 Variables
Variables Used
Base Flow into the Stream from the Area - (Measured in Cubic Meter per Second) - The Base Flow into the Stream from the Area refers to the flow that is not runoff, it is water from the ground, flowing into the channel over a long time and with a certain delay.
Gross Recharge due to Rainfall - (Measured in Cubic Meter per Second) - The Gross Recharge due to Rainfall refers to the total amount of water that infiltrates the ground as a result of precipitation.
Possible Recharge - (Measured in Cubic Meter per Second) - The Possible Recharge refers to the gross recharge minus the natural recharge of the area.
Net Ground Water Flowing Outside Catchment - (Measured in Cubic Meter per Second) - The Net Ground Water Flowing Outside Catchment refers to the steady-state groundwater flow through aquifers.
Recharge of Ground Water Body - (Measured in Cubic Meter per Second) - The Recharge of Ground Water Body from the stream refers to the hydrologic process, where water moves downward from surface water to groundwater.
STEP 1: Convert Input(s) to Base Unit
Gross Recharge due to Rainfall: 45 Cubic Meter per Second --> 45 Cubic Meter per Second No Conversion Required
Possible Recharge: 70 Cubic Meter per Second --> 70 Cubic Meter per Second No Conversion Required
Net Ground Water Flowing Outside Catchment: 12 Cubic Meter per Second --> 12 Cubic Meter per Second No Conversion Required
Recharge of Ground Water Body: 18 Cubic Meter per Second --> 18 Cubic Meter per Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
B = RG-R+I+Is --> 45-70+12+18
Evaluating ... ...
B = 5
STEP 3: Convert Result to Output's Unit
5 Cubic Meter per Second --> No Conversion Required
FINAL ANSWER
5 Cubic Meter per Second <-- Base Flow into the Stream from the Area
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

Groundwater Level Fluctuation Calculators

Equation for Specific Yield
​ LaTeX ​ Go Specific Yield = (Gross Recharge due to Rainfall-Gross Water Draft-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment)/(Watershed Area*Water Level Fluctuation)
Equation for Gross Recharge due to Rainfall and other Sources
​ LaTeX ​ Go Gross Recharge due to Rainfall = (Water Level Fluctuation*Specific Yield*Watershed Area)+Gross Water Draft+Base Flow into the Stream from the Area-Recharge of Ground Water Body-Net Ground Water Flowing Outside Catchment
Equation for Base Flow into Stream from Area
​ LaTeX ​ Go Base Flow into the Stream from the Area = Gross Recharge due to Rainfall-Gross Water Draft+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment-(Water Level Fluctuation*Specific Yield*Watershed Area)
Equation for Gross Water Draft
​ LaTeX ​ Go Gross Water Draft = Gross Recharge due to Rainfall-Base Flow into the Stream from the Area+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment-(Water Level Fluctuation*Specific Yield*Watershed Area)

Base Flow when Possible Recharge is Considered Formula

​LaTeX ​Go
Base Flow into the Stream from the Area = Gross Recharge due to Rainfall-Possible Recharge+Net Ground Water Flowing Outside Catchment+Recharge of Ground Water Body
B = RG-R+I+Is

What is Recharge in Hydrology?

Groundwater Recharge or deep drainage or deep percolation is a hydrologic process, where water moves downward from surface water to groundwater. Recharge is the primary method through which water enters an aquifer.

How to Calculate Base Flow when Possible Recharge is Considered?

Base Flow when Possible Recharge is Considered calculator uses Base Flow into the Stream from the Area = Gross Recharge due to Rainfall-Possible Recharge+Net Ground Water Flowing Outside Catchment+Recharge of Ground Water Body to calculate the Base Flow into the Stream from the Area, The Base Flow when Possible Recharge is Considered formula is defined as a portion of streamflow that is not directly generated from the excess rainfall during a storm event. Base Flow into the Stream from the Area is denoted by B symbol.

How to calculate Base Flow when Possible Recharge is Considered using this online calculator? To use this online calculator for Base Flow when Possible Recharge is Considered, enter Gross Recharge due to Rainfall (RG), Possible Recharge (R), Net Ground Water Flowing Outside Catchment (I) & Recharge of Ground Water Body (Is) and hit the calculate button. Here is how the Base Flow when Possible Recharge is Considered calculation can be explained with given input values -> 5 = 45-70+12+18.

FAQ

What is Base Flow when Possible Recharge is Considered?
The Base Flow when Possible Recharge is Considered formula is defined as a portion of streamflow that is not directly generated from the excess rainfall during a storm event and is represented as B = RG-R+I+Is or Base Flow into the Stream from the Area = Gross Recharge due to Rainfall-Possible Recharge+Net Ground Water Flowing Outside Catchment+Recharge of Ground Water Body. The Gross Recharge due to Rainfall refers to the total amount of water that infiltrates the ground as a result of precipitation, The Possible Recharge refers to the gross recharge minus the natural recharge of the area, The Net Ground Water Flowing Outside Catchment refers to the steady-state groundwater flow through aquifers & The Recharge of Ground Water Body from the stream refers to the hydrologic process, where water moves downward from surface water to groundwater.
How to calculate Base Flow when Possible Recharge is Considered?
The Base Flow when Possible Recharge is Considered formula is defined as a portion of streamflow that is not directly generated from the excess rainfall during a storm event is calculated using Base Flow into the Stream from the Area = Gross Recharge due to Rainfall-Possible Recharge+Net Ground Water Flowing Outside Catchment+Recharge of Ground Water Body. To calculate Base Flow when Possible Recharge is Considered, you need Gross Recharge due to Rainfall (RG), Possible Recharge (R), Net Ground Water Flowing Outside Catchment (I) & Recharge of Ground Water Body (Is). With our tool, you need to enter the respective value for Gross Recharge due to Rainfall, Possible Recharge, Net Ground Water Flowing Outside Catchment & Recharge of Ground Water Body and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Base Flow into the Stream from the Area?
In this formula, Base Flow into the Stream from the Area uses Gross Recharge due to Rainfall, Possible Recharge, Net Ground Water Flowing Outside Catchment & Recharge of Ground Water Body. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Base Flow into the Stream from the Area = Gross Recharge due to Rainfall-Gross Water Draft+Recharge of Ground Water Body+Net Ground Water Flowing Outside Catchment-(Water Level Fluctuation*Specific Yield*Watershed Area)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!