Base Plate Thickness Calculator

✖Maximum Cantilever Dimension is defined as the maximum value among Cantilever Dimensions and n equivalent cantilever dimension.ⓘ Maximum Cantilever Dimension [l]			+10% -10%
✖Bearing Pressure on Base Plate is defined as the bearing pressure aciting on the base plate.ⓘ Bearing Pressure on Base Plate [f_p]			+10% -10%
✖The Yield Strength of Base Plate is the magnitude of the stress at which an object ceases to be elastic and transforms into plastic.ⓘ Yield Strength of Base Plate [F_y]			+10% -10%

✖Base Plate Thickness is defined as the thickness of the base plate.ⓘ Base Plate Thickness [t_p]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Allowable Design for Column Formulas PDF PDF Image

Base Plate Thickness Solution

STEP 0: Pre-Calculation Summary

Formula Used

Base Plate Thickness = 2*Maximum Cantilever Dimension*(sqrt(Bearing Pressure on Base Plate/Yield Strength of Base Plate))
t_p = 2*l*(sqrt(f_p/F_y))
This formula uses 1 Functions, 4 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Base Plate Thickness - (Measured in Millimeter) - Base Plate Thickness is defined as the thickness of the base plate.
Maximum Cantilever Dimension - (Measured in Millimeter) - Maximum Cantilever Dimension is defined as the maximum value among Cantilever Dimensions and n equivalent cantilever dimension.
Bearing Pressure on Base Plate - (Measured in Megapascal) - Bearing Pressure on Base Plate is defined as the bearing pressure aciting on the base plate.
Yield Strength of Base Plate - (Measured in Megapascal) - The Yield Strength of Base Plate is the magnitude of the stress at which an object ceases to be elastic and transforms into plastic.

STEP 1: Convert Input(s) to Base Unit

Maximum Cantilever Dimension: 25 Millimeter --> 25 Millimeter No Conversion Required
Bearing Pressure on Base Plate: 100 Megapascal --> 100 Megapascal No Conversion Required
Yield Strength of Base Plate: 51 Megapascal --> 51 Megapascal No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_p = 2*l*(sqrt(f_p/F_y)) --> 2*25*(sqrt(100/51))

Evaluating ... ...

t_p = 70.0140042014005

STEP 3: Convert Result to Output's Unit

0.0700140042014005 Meter -->70.0140042014005 Millimeter (Check conversion here)

FINAL ANSWER

70.0140042014005 ≈ 70.014 Millimeter <-- Base Plate Thickness

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Civil » Columns » Allowable Design for Column » Allowable Stress Design Approach (AISC) » Base Plate Thickness

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Rudrani Tidke

Cummins College of Engineering for Women (CCEW), Pune

Rudrani Tidke has verified this Calculator and 50+ more calculators!

< Allowable Stress Design Approach (AISC) Calculators

Allowable Bearing Pressure given Area of Lowest Column of Structure

LaTeX Go Allowable Bearing Pressure = Columns Axial Load/Area of Foundation

Area of Foundation of Lowest Column of Structure

LaTeX Go Area of Foundation = Columns Axial Load/Allowable Bearing Pressure

Load using Area of Lowest Column of Structure

LaTeX Go Columns Axial Load = Allowable Bearing Pressure*Area of Foundation

Allowable Bearing Pressure when Full Area of Support is Occupied by Base Plate

LaTeX Go Allowable Bearing Pressure = 0.35*28-Day Compressive Strength of Concrete

Base Plate Thickness Formula

LaTeX Go

Base Plate Thickness = 2*Maximum Cantilever Dimension*(sqrt(Bearing Pressure on Base Plate/Yield Strength of Base Plate))
t_p = 2*l*(sqrt(f_p/F_y))

What is the relation between Column and loading?

For columns subjected only to direct load, the welds of a column to a base plate, are required principally for withstanding erection stresses. The welds must be proportioned to resist the forces of columns subjected to uplift.

Define Base Plates and Anchor Rod.

Base plates and anchor rods are often the last structural steel items to be designed but the first items required on the job site. Therefore, the design of the column base plate and connections are part of the critical path.

How to Calculate Base Plate Thickness?

Base Plate Thickness calculator uses Base Plate Thickness = 2*Maximum Cantilever Dimension*(sqrt(Bearing Pressure on Base Plate/Yield Strength of Base Plate)) to calculate the Base Plate Thickness, The Base Plate Thickness formula is defined as distribute column loads over a large enough area of supporting concrete construction that the design bearing strength of the concrete is not exceeded. Base Plate Thickness is denoted by t_p symbol.

How to calculate Base Plate Thickness using this online calculator? To use this online calculator for Base Plate Thickness, enter Maximum Cantilever Dimension (l), Bearing Pressure on Base Plate (f_p) & Yield Strength of Base Plate (F_y) and hit the calculate button. Here is how the Base Plate Thickness calculation can be explained with given input values -> 70014 = 2*0.025*(sqrt(100000000/51000000)).

FAQ

What is Base Plate Thickness?

The Base Plate Thickness formula is defined as distribute column loads over a large enough area of supporting concrete construction that the design bearing strength of the concrete is not exceeded and is represented as t_p = 2*l*(sqrt(f_p/F_y)) or Base Plate Thickness = 2*Maximum Cantilever Dimension*(sqrt(Bearing Pressure on Base Plate/Yield Strength of Base Plate)). Maximum Cantilever Dimension is defined as the maximum value among Cantilever Dimensions and n equivalent cantilever dimension, Bearing Pressure on Base Plate is defined as the bearing pressure aciting on the base plate & The Yield Strength of Base Plate is the magnitude of the stress at which an object ceases to be elastic and transforms into plastic.

How to calculate Base Plate Thickness?

The Base Plate Thickness formula is defined as distribute column loads over a large enough area of supporting concrete construction that the design bearing strength of the concrete is not exceeded is calculated using Base Plate Thickness = 2*Maximum Cantilever Dimension*(sqrt(Bearing Pressure on Base Plate/Yield Strength of Base Plate)). To calculate Base Plate Thickness, you need Maximum Cantilever Dimension (l), Bearing Pressure on Base Plate (f_p) & Yield Strength of Base Plate (F_y). With our tool, you need to enter the respective value for Maximum Cantilever Dimension, Bearing Pressure on Base Plate & Yield Strength of Base Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search