Base Area of Cone given Lateral Surface Area and Slant Height Calculator

✖Lateral Surface Area of Cone is defined as the total quantity of plane enclosed on the lateral curved surface of the Cone.ⓘ Lateral Surface Area of Cone [LSA]			+10% -10%
✖Slant Height of Cone is the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone.ⓘ Slant Height of Cone [h_Slant]			+10% -10%

✖Base Area of Cone is the total quantity of plane enclosed on the base circular surface of the Cone.ⓘ Base Area of Cone given Lateral Surface Area and Slant Height [A_Base]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Cone Formula PDF PDF Image

Base Area of Cone given Lateral Surface Area and Slant Height Solution

STEP 0: Pre-Calculation Summary

Formula Used

Base Area of Cone = pi*(Lateral Surface Area of Cone/(pi*Slant Height of Cone))^2
A_Base = pi*(LSA/(pi*h_Slant))^2
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Base Area of Cone - (Measured in Square Meter) - Base Area of Cone is the total quantity of plane enclosed on the base circular surface of the Cone.
Lateral Surface Area of Cone - (Measured in Square Meter) - Lateral Surface Area of Cone is defined as the total quantity of plane enclosed on the lateral curved surface of the Cone.
Slant Height of Cone - (Measured in Meter) - Slant Height of Cone is the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone.

STEP 1: Convert Input(s) to Base Unit

Lateral Surface Area of Cone: 350 Square Meter --> 350 Square Meter No Conversion Required
Slant Height of Cone: 11 Meter --> 11 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_Base = pi*(LSA/(pi*h_Slant))^2 --> pi*(350/(pi*11))^2

Evaluating ... ...

A_Base = 322.255876508383

STEP 3: Convert Result to Output's Unit

322.255876508383 Square Meter --> No Conversion Required

FINAL ANSWER

322.255876508383 ≈ 322.2559 Square Meter <-- Base Area of Cone

(Calculation completed in 00.004 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Cone » Cone » Surface Area of Cone » Base Area of Cone » Base Area of Cone given Lateral Surface Area and Slant Height

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Shweta Patil

Walchand College of Engineering (WCE), Sangli

Shweta Patil has verified this Calculator and 1100+ more calculators!

< Base Area of Cone Calculators

Base Area of Cone given Lateral Surface Area and Slant Height

LaTeX Go Base Area of Cone = pi*(Lateral Surface Area of Cone/(pi*Slant Height of Cone))^2

Base Area of Cone given Slant Height

LaTeX Go Base Area of Cone = pi*(Slant Height of Cone^2-Height of Cone^2)

Base Area of Cone given Base Circumference

LaTeX Go Base Area of Cone = (Base Circumference of Cone^2)/(4*pi)

Base Area of Cone

LaTeX Go Base Area of Cone = pi*Base Radius of Cone^2

< Surface Area of Cone Calculators

Lateral Surface Area of Cone given Height

LaTeX Go Lateral Surface Area of Cone = pi*Base Radius of Cone*sqrt(Height of Cone^2+Base Radius of Cone^2)

Base Area of Cone given Lateral Surface Area and Slant Height

LaTeX Go Base Area of Cone = pi*(Lateral Surface Area of Cone/(pi*Slant Height of Cone))^2

Lateral Surface Area of Cone

LaTeX Go Lateral Surface Area of Cone = pi*Base Radius of Cone*Slant Height of Cone

Base Area of Cone

LaTeX Go Base Area of Cone = pi*Base Radius of Cone^2

Base Area of Cone given Lateral Surface Area and Slant Height Formula

LaTeX Go

Base Area of Cone = pi*(Lateral Surface Area of Cone/(pi*Slant Height of Cone))^2
A_Base = pi*(LSA/(pi*h_Slant))^2

What is a Cone?

A Cone is obtained by rotating a line inclined at a fixed acute angle from a fixed axis of rotation. The sharp tip is called the apex of the Cone. If the rotating line is crossing the axis of rotation, then the resulting shape is a double-napped Cone - two oppositely placed Cones joined on the apex. Cutting a Cone by a plane will result in some important two-dimensional shapes like circles, ellipses, parabolas, and hyperbolas, depending on the angle of cutting.

How to Calculate Base Area of Cone given Lateral Surface Area and Slant Height?

Base Area of Cone given Lateral Surface Area and Slant Height calculator uses Base Area of Cone = pi*(Lateral Surface Area of Cone/(pi*Slant Height of Cone))^2 to calculate the Base Area of Cone, Base Area of Cone given Lateral Surface Area and Slant Height formula is defined as the total quantity of plane enclosed on the base circular surface of the Cone, and calculated using the lateral surface area and slant height of the Cone. Base Area of Cone is denoted by A_Base symbol.

How to calculate Base Area of Cone given Lateral Surface Area and Slant Height using this online calculator? To use this online calculator for Base Area of Cone given Lateral Surface Area and Slant Height, enter Lateral Surface Area of Cone (LSA) & Slant Height of Cone (h_Slant) and hit the calculate button. Here is how the Base Area of Cone given Lateral Surface Area and Slant Height calculation can be explained with given input values -> 322.2559 = pi*(350/(pi*11))^2.

FAQ

What is Base Area of Cone given Lateral Surface Area and Slant Height?

Base Area of Cone given Lateral Surface Area and Slant Height formula is defined as the total quantity of plane enclosed on the base circular surface of the Cone, and calculated using the lateral surface area and slant height of the Cone and is represented as A_Base = pi*(LSA/(pi*h_Slant))^2 or Base Area of Cone = pi*(Lateral Surface Area of Cone/(pi*Slant Height of Cone))^2. Lateral Surface Area of Cone is defined as the total quantity of plane enclosed on the lateral curved surface of the Cone & Slant Height of Cone is the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone.

How to calculate Base Area of Cone given Lateral Surface Area and Slant Height?

Base Area of Cone given Lateral Surface Area and Slant Height formula is defined as the total quantity of plane enclosed on the base circular surface of the Cone, and calculated using the lateral surface area and slant height of the Cone is calculated using Base Area of Cone = pi*(Lateral Surface Area of Cone/(pi*Slant Height of Cone))^2. To calculate Base Area of Cone given Lateral Surface Area and Slant Height, you need Lateral Surface Area of Cone (LSA) & Slant Height of Cone (h_Slant). With our tool, you need to enter the respective value for Lateral Surface Area of Cone & Slant Height of Cone and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Base Area of Cone?

In this formula, Base Area of Cone uses Lateral Surface Area of Cone & Slant Height of Cone. We can use 3 other way(s) to calculate the same, which is/are as follows -

Base Area of Cone = pi*Base Radius of Cone^2
Base Area of Cone = (Base Circumference of Cone^2)/(4*pi)
Base Area of Cone = pi*(Slant Height of Cone^2-Height of Cone^2)

Home

FREE PDFs

🔍 Search