Axial Thrust Load on Bearing given Equivalent Dynamic Load Calculator

✖Equivalent dynamic load on back to back bearing is a net dynamic load on a back-to-back or face-to-face mounted bearing.ⓘ Equivalent Dynamic Load on Back to Back Bearing [P_b]			+10% -10%
✖Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load.ⓘ Radial Factor [X]			+10% -10%
✖Race-rotation factor is a factor accounting for the rotation of the races of a bearing.ⓘ Race-Rotation Factor [V]			+10% -10%
✖Radial load acting on bearing is the amount of load onto the bearing acting radially.ⓘ Radial Load Acting on Bearing [F_r]			+10% -10%
✖Thrust Factor for Bearing is used to denote the portion of the thrust force contributing to equivalent bearing load.ⓘ Thrust Factor for Bearing [Y]			+10% -10%

✖Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.ⓘ Axial Thrust Load on Bearing given Equivalent Dynamic Load [F_a]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Rolling Contact Bearing Formulas PDF PDF Image

Axial Thrust Load on Bearing given Equivalent Dynamic Load Solution

STEP 0: Pre-Calculation Summary

Formula Used

Axial or Thrust Load Acting on Bearing = (Equivalent Dynamic Load on Back to Back Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Thrust Factor for Bearing
F_a = (P_b-(X*V*F_r))/Y
This formula uses 6 Variables

Variables Used

Axial or Thrust Load Acting on Bearing - (Measured in Newton) - Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.
Equivalent Dynamic Load on Back to Back Bearing - (Measured in Newton) - Equivalent dynamic load on back to back bearing is a net dynamic load on a back-to-back or face-to-face mounted bearing.
Radial Factor - Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load.
Race-Rotation Factor - Race-rotation factor is a factor accounting for the rotation of the races of a bearing.
Radial Load Acting on Bearing - (Measured in Newton) - Radial load acting on bearing is the amount of load onto the bearing acting radially.
Thrust Factor for Bearing - Thrust Factor for Bearing is used to denote the portion of the thrust force contributing to equivalent bearing load.

STEP 1: Convert Input(s) to Base Unit

Equivalent Dynamic Load on Back to Back Bearing: 7350 Newton --> 7350 Newton No Conversion Required
Radial Factor: 0.56 --> No Conversion Required
Race-Rotation Factor: 1.2 --> No Conversion Required
Radial Load Acting on Bearing: 8050 Newton --> 8050 Newton No Conversion Required
Thrust Factor for Bearing: 1.5 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_a = (P_b-(X*V*F_r))/Y --> (7350-(0.56*1.2*8050))/1.5

Evaluating ... ...

F_a = 1293.6

STEP 3: Convert Result to Output's Unit

1293.6 Newton --> No Conversion Required

FINAL ANSWER

1293.6 Newton <-- Axial or Thrust Load Acting on Bearing

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Rolling Contact Bearing » Dynamic and Equivalent Load » Axial Thrust Load on Bearing given Equivalent Dynamic Load

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Dynamic and Equivalent Load Calculators

Equivalent Dynamic Load for Bearing given Radial Factor

LaTeX Go Equivalent Dynamic Load on Back to Back Bearing = (Radial Factor*Radial Load Acting on Bearing)+(Thrust Factor for Bearing*Axial or Thrust Load Acting on Bearing)

Equivalent Dynamic Load for Bearing given Rated Bearing Life

LaTeX Go Equivalent Dynamic Load on Back to Back Bearing = Dynamic Load Capacity of Bearing/(Rated Bearing Life^(1/Constant p of Bearing))

Dynamic Load Capacity for Bearing given Rated Bearing Life

LaTeX Go Dynamic Load Capacity of Bearing = Equivalent Dynamic Load on Back to Back Bearing*(Rated Bearing Life^(1/Constant p of Bearing))

Dynamic Load Capacity for Ball Bearing

LaTeX Go Dynamic Load Capacity of Bearing = Equivalent Dynamic Load on Back to Back Bearing*(Rated Bearing Life^(1/3))

Axial Thrust Load on Bearing given Equivalent Dynamic Load Formula

LaTeX Go

What is a rolling contact bearing?

The term rolling contact bearings refers to the wide variety of bearings that use spherical balls or some other type of roller between the stationary and the moving elements. The most common type of bearing supports a rotating shaft, resisting purely radial loads or a combination of radial and axial (thrust) loads.

How to Calculate Axial Thrust Load on Bearing given Equivalent Dynamic Load?

Axial Thrust Load on Bearing given Equivalent Dynamic Load calculator uses Axial or Thrust Load Acting on Bearing = (Equivalent Dynamic Load on Back to Back Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Thrust Factor for Bearing to calculate the Axial or Thrust Load Acting on Bearing, Axial Thrust Load on Bearing given Equivalent Dynamic Load is the thrust load acting onto the bearing in the axial direction to the bearing. Axial or Thrust Load Acting on Bearing is denoted by F_a symbol.

How to calculate Axial Thrust Load on Bearing given Equivalent Dynamic Load using this online calculator? To use this online calculator for Axial Thrust Load on Bearing given Equivalent Dynamic Load, enter Equivalent Dynamic Load on Back to Back Bearing (P_b), Radial Factor (X), Race-Rotation Factor (V), Radial Load Acting on Bearing (F_r) & Thrust Factor for Bearing (Y) and hit the calculate button. Here is how the Axial Thrust Load on Bearing given Equivalent Dynamic Load calculation can be explained with given input values -> 1293.6 = (7350-(0.56*1.2*8050))/1.5.

FAQ

What is Axial Thrust Load on Bearing given Equivalent Dynamic Load?

Axial Thrust Load on Bearing given Equivalent Dynamic Load is the thrust load acting onto the bearing in the axial direction to the bearing and is represented as F_a = (P_b-(X*V*F_r))/Y or Axial or Thrust Load Acting on Bearing = (Equivalent Dynamic Load on Back to Back Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Thrust Factor for Bearing. Equivalent dynamic load on back to back bearing is a net dynamic load on a back-to-back or face-to-face mounted bearing, Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load, Race-rotation factor is a factor accounting for the rotation of the races of a bearing, Radial load acting on bearing is the amount of load onto the bearing acting radially & Thrust Factor for Bearing is used to denote the portion of the thrust force contributing to equivalent bearing load.

How to calculate Axial Thrust Load on Bearing given Equivalent Dynamic Load?

Axial Thrust Load on Bearing given Equivalent Dynamic Load is the thrust load acting onto the bearing in the axial direction to the bearing is calculated using Axial or Thrust Load Acting on Bearing = (Equivalent Dynamic Load on Back to Back Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Thrust Factor for Bearing. To calculate Axial Thrust Load on Bearing given Equivalent Dynamic Load, you need Equivalent Dynamic Load on Back to Back Bearing (P_b), Radial Factor (X), Race-Rotation Factor (V), Radial Load Acting on Bearing (F_r) & Thrust Factor for Bearing (Y). With our tool, you need to enter the respective value for Equivalent Dynamic Load on Back to Back Bearing, Radial Factor, Race-Rotation Factor, Radial Load Acting on Bearing & Thrust Factor for Bearing and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search