Average Inflow given Change in Storage Calculator

✖Change in Storage Volumes of water storage bodies on the stream is the difference of water incoming and outgoing.ⓘ Change in Storage Volumes [ΔSv]			+10% -10%
✖Average Outflow during the time interval is the removal of water from the hydrological cycle. It can also refer to the measure of the average volume of outgoing water per unit of time.ⓘ Average Outflow [Q_avg]			+10% -10%
✖Time Interval is the amount of time required for the change from the initial to the final state.ⓘ Time Interval [Δt]			+10% -10%

✖Average Inflow during the time interval is the water entering a waterbody. It can also refer to the measure of the average volume of incoming water per unit of time.ⓘ Average Inflow given Change in Storage [I_avg]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Basic Equations of Flood Routing Formulas PDF PDF Image

Average Inflow given Change in Storage Solution

STEP 0: Pre-Calculation Summary

Formula Used

Average Inflow = (Change in Storage Volumes+Average Outflow*Time Interval)/Time Interval
I_avg = (ΔSv+Q_avg*Δt)/Δt
This formula uses 4 Variables

Variables Used

Average Inflow - (Measured in Cubic Meter per Second) - Average Inflow during the time interval is the water entering a waterbody. It can also refer to the measure of the average volume of incoming water per unit of time.
Change in Storage Volumes - Change in Storage Volumes of water storage bodies on the stream is the difference of water incoming and outgoing.
Average Outflow - (Measured in Cubic Meter per Second) - Average Outflow during the time interval is the removal of water from the hydrological cycle. It can also refer to the measure of the average volume of outgoing water per unit of time.
Time Interval - (Measured in Second) - Time Interval is the amount of time required for the change from the initial to the final state.

STEP 1: Convert Input(s) to Base Unit

Change in Storage Volumes: 20 --> No Conversion Required
Average Outflow: 56 Cubic Meter per Second --> 56 Cubic Meter per Second No Conversion Required
Time Interval: 5 Second --> 5 Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_avg = (ΔSv+Q_avg*Δt)/Δt --> (20+56*5)/5

Evaluating ... ...

I_avg = 60

STEP 3: Convert Result to Output's Unit

60 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

60 Cubic Meter per Second <-- Average Inflow

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Flood Routing » Basic Equations of Flood Routing » Average Inflow given Change in Storage

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Basic Equations of Flood Routing Calculators

Average Outflow in Time given Change in Storage

LaTeX Go Average Outflow = (Average Inflow*Time Interval-Change in Storage Volumes)/Time Interval

Average Inflow given Change in Storage

LaTeX Go Average Inflow = (Change in Storage Volumes+Average Outflow*Time Interval)/Time Interval

Average Outflow Denoting Beginning and End of Time Interval

LaTeX Go Average Outflow = (Outflow at the Beginning of Time Interval+Outflow at the End of Time Interval)/2

Average Inflow Denoting at Beginning and End of Time Interval

LaTeX Go Average Inflow = (Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2

Average Inflow given Change in Storage Formula

LaTeX Go

Average Inflow = (Change in Storage Volumes+Average Outflow*Time Interval)/Time Interval
I_avg = (ΔSv+Q_avg*Δt)/Δt

What is Flood Routing?

Flood routing is a procedure to determine the time and magnitude of flow (i.e., the flow hydrograph) at a point on a watercourse from known or assumed hydrographs at one or more points upstream. The procedure is specifically known as flood routing if the flow is a flood.

How to Calculate Average Inflow given Change in Storage?

Average Inflow given Change in Storage calculator uses Average Inflow = (Change in Storage Volumes+Average Outflow*Time Interval)/Time Interval to calculate the Average Inflow, The Average Inflow given Change in Storage formula is defined as the inflow of a body of water is the source of the water within the body of water. It can also refer to the average volume of incoming water in unit time. Average Inflow is denoted by I_avg symbol.

How to calculate Average Inflow given Change in Storage using this online calculator? To use this online calculator for Average Inflow given Change in Storage, enter Change in Storage Volumes (ΔSv), Average Outflow (Q_avg) & Time Interval (Δt) and hit the calculate button. Here is how the Average Inflow given Change in Storage calculation can be explained with given input values -> 54 = (20+56*5)/5.

FAQ

What is Average Inflow given Change in Storage?

The Average Inflow given Change in Storage formula is defined as the inflow of a body of water is the source of the water within the body of water. It can also refer to the average volume of incoming water in unit time and is represented as I_avg = (ΔSv+Q_avg*Δt)/Δt or Average Inflow = (Change in Storage Volumes+Average Outflow*Time Interval)/Time Interval. Change in Storage Volumes of water storage bodies on the stream is the difference of water incoming and outgoing, Average Outflow during the time interval is the removal of water from the hydrological cycle. It can also refer to the measure of the average volume of outgoing water per unit of time & Time Interval is the amount of time required for the change from the initial to the final state.

How to calculate Average Inflow given Change in Storage?

The Average Inflow given Change in Storage formula is defined as the inflow of a body of water is the source of the water within the body of water. It can also refer to the average volume of incoming water in unit time is calculated using Average Inflow = (Change in Storage Volumes+Average Outflow*Time Interval)/Time Interval. To calculate Average Inflow given Change in Storage, you need Change in Storage Volumes (ΔSv), Average Outflow (Q_avg) & Time Interval (Δt). With our tool, you need to enter the respective value for Change in Storage Volumes, Average Outflow & Time Interval and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Average Inflow?

In this formula, Average Inflow uses Change in Storage Volumes, Average Outflow & Time Interval. We can use 1 other way(s) to calculate the same, which is/are as follows -

Average Inflow = (Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2

Home

FREE PDFs

🔍 Search