Average Cutting Edges used per insert given Estimated Tool Costs Calculator

✖Cost of Insert is the amount spent on inserting a tool in its specified holder.ⓘ Cost of Insert [C_i]			+10% -10%
✖Tool Cost is the amount of money spend on the purchase, maintenance and changing of tools.ⓘ Tool Cost [TC]			+10% -10%
✖Cost of The Holder is the amount required to get a new holder for a tool.ⓘ Cost of The Holder [C_h]			+10% -10%
✖Cutting Edges used during Life of Holder is the total number of Cutting Edges engaged with the holder until it wears off beyond use.ⓘ Cutting Edges Used During Life of Holder [CE_hl]			+10% -10%

✖Average Number of Cutting Edges Used Per Insert is the supposed count of cutting edges that engaged during insertion into the holder.ⓘ Average Cutting Edges used per insert given Estimated Tool Costs [CE_avg]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Metal Machining Formula PDF PDF Image

Average Cutting Edges used per insert given Estimated Tool Costs Solution

STEP 0: Pre-Calculation Summary

Formula Used

Average Number of Cutting Edges Used Per Insert = Cost of Insert/(Tool Cost-(Cost of The Holder/Cutting Edges Used During Life of Holder))
CE_avg = C_i/(TC-(C_h/CE_hl))
This formula uses 5 Variables

Variables Used

Average Number of Cutting Edges Used Per Insert - Average Number of Cutting Edges Used Per Insert is the supposed count of cutting edges that engaged during insertion into the holder.
Cost of Insert - Cost of Insert is the amount spent on inserting a tool in its specified holder.
Tool Cost - Tool Cost is the amount of money spend on the purchase, maintenance and changing of tools.
Cost of The Holder - Cost of The Holder is the amount required to get a new holder for a tool.
Cutting Edges Used During Life of Holder - Cutting Edges used during Life of Holder is the total number of Cutting Edges engaged with the holder until it wears off beyond use.

STEP 1: Convert Input(s) to Base Unit

Cost of Insert: 900 --> No Conversion Required
Tool Cost: 200 --> No Conversion Required
Cost of The Holder: 2000 --> No Conversion Required
Cutting Edges Used During Life of Holder: 21.92771 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

CE_avg = C_i/(TC-(C_h/CE_hl)) --> 900/(200-(2000/21.92771))

Evaluating ... ...

CE_avg = 8.27272753948579

STEP 3: Convert Result to Output's Unit

8.27272753948579 --> No Conversion Required

FINAL ANSWER

8.27272753948579 ≈ 8.272728 <-- Average Number of Cutting Edges Used Per Insert

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Metal Machining Economics » Estimation for Optimal Conditions » Estimation Cost » Average Cutting Edges used per insert given Estimated Tool Costs

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has verified this Calculator and 400+ more calculators!

< Estimation Cost Calculators

Operator's Overhead Percentage given Machining and Operating Rate

LaTeX Go Operator's Overhead Percentage = ((Machining and Operating Rate-(Depreciation Rate*(100+Machine Overhead Percentage)/100))*100/Wage Rate)-100

Machine Overhead Percentage given Machining and Operating Rate

LaTeX Go Machine Overhead Percentage = ((Machining and Operating Rate-(Wage Rate*(100+Operator's Overhead Percentage)/100))*100/Depreciation Rate)-100

Operator's Wage Rate given Machining and Operating Rate

LaTeX Go Wage Rate = (Machining and Operating Rate-(Depreciation Rate*(100+Machine Overhead Percentage)/100))*100/(100+Operator's Overhead Percentage)

Machining and Operating Rate

LaTeX Go Machining and Operating Rate = (Wage Rate*(100+Operator's Overhead Percentage)/100)+(Depreciation Rate*(100+Machine Overhead Percentage)/100)

Average Cutting Edges used per insert given Estimated Tool Costs Formula

LaTeX Go

Average Number of Cutting Edges Used Per Insert = Cost of Insert/(Tool Cost-(Cost of The Holder/Cutting Edges Used During Life of Holder))
CE_avg = C_i/(TC-(C_h/CE_hl))

The Importance of Tool Holders

A tool holder is very important in mechanized processes that require high levels of accuracy because they are the interface between a tool and a machine. An imbalance between a high-speed tool and a machine could damage the final product by providing an undesired finish, or it could shorten the lifespan of a machine by wearing down the spindle. The right tool holder, when properly installed and cared for, makes sure cutting processes are performed accurately and safely.

How to Calculate Average Cutting Edges used per insert given Estimated Tool Costs?

Average Cutting Edges used per insert given Estimated Tool Costs calculator uses Average Number of Cutting Edges Used Per Insert = Cost of Insert/(Tool Cost-(Cost of The Holder/Cutting Edges Used During Life of Holder)) to calculate the Average Number of Cutting Edges Used Per Insert, The Average Cutting Edges used per insert given Estimated Tool Costs is a method to determine the supposed number of cutting tools that can be engaged with the tool holder until per insertion. Average Number of Cutting Edges Used Per Insert is denoted by CE_avg symbol.

How to calculate Average Cutting Edges used per insert given Estimated Tool Costs using this online calculator? To use this online calculator for Average Cutting Edges used per insert given Estimated Tool Costs, enter Cost of Insert (C_i), Tool Cost (TC), Cost of The Holder (C_h) & Cutting Edges Used During Life of Holder (CE_hl) and hit the calculate button. Here is how the Average Cutting Edges used per insert given Estimated Tool Costs calculation can be explained with given input values -> 1.894218 = 900/(200-(2000/21.92771)).

FAQ

What is Average Cutting Edges used per insert given Estimated Tool Costs?

The Average Cutting Edges used per insert given Estimated Tool Costs is a method to determine the supposed number of cutting tools that can be engaged with the tool holder until per insertion and is represented as CE_avg = C_i/(TC-(C_h/CE_hl)) or Average Number of Cutting Edges Used Per Insert = Cost of Insert/(Tool Cost-(Cost of The Holder/Cutting Edges Used During Life of Holder)). Cost of Insert is the amount spent on inserting a tool in its specified holder, Tool Cost is the amount of money spend on the purchase, maintenance and changing of tools, Cost of The Holder is the amount required to get a new holder for a tool & Cutting Edges used during Life of Holder is the total number of Cutting Edges engaged with the holder until it wears off beyond use.

How to calculate Average Cutting Edges used per insert given Estimated Tool Costs?

The Average Cutting Edges used per insert given Estimated Tool Costs is a method to determine the supposed number of cutting tools that can be engaged with the tool holder until per insertion is calculated using Average Number of Cutting Edges Used Per Insert = Cost of Insert/(Tool Cost-(Cost of The Holder/Cutting Edges Used During Life of Holder)). To calculate Average Cutting Edges used per insert given Estimated Tool Costs, you need Cost of Insert (C_i), Tool Cost (TC), Cost of The Holder (C_h) & Cutting Edges Used During Life of Holder (CE_hl). With our tool, you need to enter the respective value for Cost of Insert, Tool Cost, Cost of The Holder & Cutting Edges Used During Life of Holder and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search