LCM of three numbers

Average Current Speed given Reynolds Number Calculator

Engineering Chemistry Financial Health More >>

↳

Civil Chemical Engineering Electrical Electronics More >>

⤿

Coastal and Ocean Engineering Bridge and Suspension Cable Columns Concrete Formulas More >>

⤿

Surf Zone Hydrodynamics Calculation of Forces on Ocean Structures Density Currents in Harbors Density Currents in Rivers More >>

⤿

Harbor Hydrodynamics Methods to Predict Channel Shoaling Nearshore Currents Surf Zone Waves More >>

⤿

Mooring Important Formulas of Harbor Oscillation Harbor Oscillations Reflection from Structures More >>

⤿

Mooring Forces Important Formulas of Mooring Forces

⤿

Form Drag Propeller Drag Skin Friction

✖The Reynolds Number is the ratio of inertial forces to viscous forces within a fluid which is subjected to relative internal movement due to different fluid velocities.ⓘ Reynolds Number [Re]			+10% -10%
✖Kinematic Viscosity in Stokes is defined as the ratio between the dynamic viscosity μ and the density ρ of the fluid.ⓘ Kinematic Viscosity in Stokes [ν^']			+10% -10%
✖Waterline Length of a Vessel is the length of a ship or boat at the level where it sits in the water.ⓘ Waterline Length of a Vessel [l_wl]			+10% -10%
✖Angle of the Current refers to the direction at which ocean currents or tidal flows approach a coastline or a coastal structure, relative to a defined reference direction.ⓘ Angle of the Current [θ_c]			+10% -10%

✖Average Current Speed for propeller drag refers to calculating propeller drag in water depending on factors, including the type of vessel, size and shape of propeller, and operating conditions.ⓘ Average Current Speed given Reynolds Number [V_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mooring Formula PDF PDF Image

Average Current Speed given Reynolds Number Solution

STEP 0: Pre-Calculation Summary

Formula Used

Average Current Speed = (Reynolds Number*Kinematic Viscosity in Stokes)/Waterline Length of a Vessel*cos(Angle of the Current)
V_c = (Re*ν^')/l_wl*cos(θ_c)
This formula uses 1 Functions, 5 Variables

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Average Current Speed - (Measured in Meter per Second) - Average Current Speed for propeller drag refers to calculating propeller drag in water depending on factors, including the type of vessel, size and shape of propeller, and operating conditions.
Reynolds Number - The Reynolds Number is the ratio of inertial forces to viscous forces within a fluid which is subjected to relative internal movement due to different fluid velocities.
Kinematic Viscosity in Stokes - (Measured in Square Meter per Second) - Kinematic Viscosity in Stokes is defined as the ratio between the dynamic viscosity μ and the density ρ of the fluid.
Waterline Length of a Vessel - (Measured in Meter) - Waterline Length of a Vessel is the length of a ship or boat at the level where it sits in the water.
Angle of the Current - Angle of the Current refers to the direction at which ocean currents or tidal flows approach a coastline or a coastal structure, relative to a defined reference direction.

STEP 1: Convert Input(s) to Base Unit

Reynolds Number: 5000 --> No Conversion Required
Kinematic Viscosity in Stokes: 7.25 Stokes --> 0.000725 Square Meter per Second (Check conversion here)
Waterline Length of a Vessel: 7.32 Meter --> 7.32 Meter No Conversion Required
Angle of the Current: 1.15 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_c = (Re*ν^')/l_wl*cos(θ_c) --> (5000*0.000725)/7.32*cos(1.15)

Evaluating ... ...

V_c = 0.202290570109982

STEP 3: Convert Result to Output's Unit

0.202290570109982 Meter per Second -->728.246052395936 Meter per Hour (Check conversion here)

FINAL ANSWER

728.246052395936 ≈ 728.2461 Meter per Hour <-- Average Current Speed

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Surf Zone Hydrodynamics » Harbor Hydrodynamics » Mooring » Mooring Forces » Average Current Speed given Reynolds Number

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Mooring Forces Calculators

Coefficient of Drag for Winds Measured at 10 m given Drag Force due to Wind

LaTeX Go Coefficient of Drag = Drag Force/(0.5*Air Density*Projected Area of the Vessel*Wind Speed at Height of 10 m^2)

Projected Area of Vessel above Waterline given Drag Force due to Wind

LaTeX Go Projected Area of the Vessel = Drag Force/(0.5*Air Density*Coefficient of Drag*Wind Speed at Height of 10 m^2)

Mass Density of Air given Drag Force due to Wind

LaTeX Go Air Density = Drag Force/(0.5*Coefficient of Drag*Projected Area of the Vessel*Wind Speed at Height of 10 m^2)

Drag Force due to Wind

LaTeX Go Drag Force = 0.5*Air Density*Coefficient of Drag*Projected Area of the Vessel*Wind Speed at Height of 10 m^2

< Important Formulas of Mooring Forces Calculators

Undamped Natural Period of Vessel

LaTeX Go Undamped Natural Period of a Vessel = 2*pi*(sqrt(Virtual Mass of the Ship/Effective Spring Constant))

Individual Stiffness of Mooring Line

LaTeX Go Individual Mooring Line Stiffness = Axial Tension or Load on a Mooring Line/Elongation in the Mooring Line

Mass of Vessel given Virtual Mass of Vessel

LaTeX Go Mass of a Vessel = Virtual Mass of the Ship-Mass of Vessel due to Inertial Effects

Virtual Mass of Vessel

LaTeX Go Virtual Mass of the Ship = Mass of a Vessel+Mass of Vessel due to Inertial Effects

Average Current Speed given Reynolds Number Formula

LaTeX Go

Average Current Speed = (Reynolds Number*Kinematic Viscosity in Stokes)/Waterline Length of a Vessel*cos(Angle of the Current)
V_c = (Re*ν^')/l_wl*cos(θ_c)

What causes Skin Friction?

Skin friction drag is caused by the viscosity of fluids and is developed from laminar drag to turbulent drag as a fluid moves on the surface of an object. Skin friction drag is generally expressed in terms of the Reynolds number, which is the ratio between inertial force and viscous force.

What is Reynolds Number?

The Reynolds number is the ratio of inertial forces to viscous forces within a fluid which is subjected to relative internal movement due to different fluid velocities. A region where these forces change behavior is known as a boundary layer, such as the bounding surface in the interior of a pipe.

How to Calculate Average Current Speed given Reynolds Number?

Average Current Speed given Reynolds Number calculator uses Average Current Speed = (Reynolds Number*Kinematic Viscosity in Stokes)/Waterline Length of a Vessel*cos(Angle of the Current) to calculate the Average Current Speed, The Average Current Speed given Reynolds Number formula is defined as the propeller drag in water depending on factors, including the type of vessel, size and shape of propeller, and operating conditions. This parameter influence the skin friction coefficient. Average Current Speed is denoted by V_c symbol.

How to calculate Average Current Speed given Reynolds Number using this online calculator? To use this online calculator for Average Current Speed given Reynolds Number, enter Reynolds Number (Re), Kinematic Viscosity in Stokes (ν^'), Waterline Length of a Vessel (l_wl) & Angle of the Current (θ_c) and hit the calculate button. Here is how the Average Current Speed given Reynolds Number calculation can be explained with given input values -> 2.6E+6 = (5000*0.000725)/7.32*cos(1.15).

FAQ

What is Average Current Speed given Reynolds Number?

The Average Current Speed given Reynolds Number formula is defined as the propeller drag in water depending on factors, including the type of vessel, size and shape of propeller, and operating conditions. This parameter influence the skin friction coefficient and is represented as V_c = (Re*ν^')/l_wl*cos(θ_c) or Average Current Speed = (Reynolds Number*Kinematic Viscosity in Stokes)/Waterline Length of a Vessel*cos(Angle of the Current). The Reynolds Number is the ratio of inertial forces to viscous forces within a fluid which is subjected to relative internal movement due to different fluid velocities, Kinematic Viscosity in Stokes is defined as the ratio between the dynamic viscosity μ and the density ρ of the fluid, Waterline Length of a Vessel is the length of a ship or boat at the level where it sits in the water & Angle of the Current refers to the direction at which ocean currents or tidal flows approach a coastline or a coastal structure, relative to a defined reference direction.

How to calculate Average Current Speed given Reynolds Number?

The Average Current Speed given Reynolds Number formula is defined as the propeller drag in water depending on factors, including the type of vessel, size and shape of propeller, and operating conditions. This parameter influence the skin friction coefficient is calculated using Average Current Speed = (Reynolds Number*Kinematic Viscosity in Stokes)/Waterline Length of a Vessel*cos(Angle of the Current). To calculate Average Current Speed given Reynolds Number, you need Reynolds Number (Re), Kinematic Viscosity in Stokes (ν^'), Waterline Length of a Vessel (l_wl) & Angle of the Current (θ_c). With our tool, you need to enter the respective value for Reynolds Number, Kinematic Viscosity in Stokes, Waterline Length of a Vessel & Angle of the Current and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search