HCF of three numbers

Attenuation for TEmn mode Calculator

Engineering Chemistry Financial Health More >>

↳

Electronics Chemical Engineering Civil Electrical More >>

⤿

Microwave Theory Amplifiers Analog Communications Analog Electronics More >>

⤿

Microwave Devices Microwave Semiconductor Devices Microwave Tubes and Circuits

✖Conductivity (or specific conductance) of an electrolyte solution is a measure of its ability to conduct electricity. The SI unit of conductivity is siemens per meter (S/m).ⓘ Conductivity [σ]			+10% -10%
✖Intrinsic impedance describes the magnitude of the magnetic and electric fields present in the free space.ⓘ Intrinsic Impedance [η]			+10% -10%
✖Cut-off Frequency of rectangular waveguide defines wave propagation modes in the rectangular waveguide, and this frequency is dependent on the dimensions of the waveguide.ⓘ Cut-off Frequency [f_c]			+10% -10%
✖Frequency the number of waves that pass a fixed point in unit time; also, the number of cycles or vibrations undergone during one unit of time by a body in periodic motion in a waveguide.ⓘ Frequency [f]			+10% -10%

✖Attenuation for the TEmn mode is the attenuation calculated in the rectangular waveguide for the TEmn mode. Attenuation is defined as the reduction in the amplitude of a signal.ⓘ Attenuation for TEmn mode [α_TE]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Microwave Theory Formula PDF PDF Image

Attenuation for TEmn mode Solution

STEP 0: Pre-Calculation Summary

Formula Used

Attenuation for the TEmn mode = (Conductivity*Intrinsic Impedance)/(2*sqrt(1-((Cut-off Frequency)/(Frequency))^2))
α_TE = (σ*η)/(2*sqrt(1-((f_c)/(f))^2))
This formula uses 1 Functions, 5 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Attenuation for the TEmn mode - (Measured in Decibel per Meter) - Attenuation for the TEmn mode is the attenuation calculated in the rectangular waveguide for the TEmn mode. Attenuation is defined as the reduction in the amplitude of a signal.
Conductivity - (Measured in Siemens per Meter) - Conductivity (or specific conductance) of an electrolyte solution is a measure of its ability to conduct electricity. The SI unit of conductivity is siemens per meter (S/m).
Intrinsic Impedance - (Measured in Ohm) - Intrinsic impedance describes the magnitude of the magnetic and electric fields present in the free space.
Cut-off Frequency - (Measured in Hertz) - Cut-off Frequency of rectangular waveguide defines wave propagation modes in the rectangular waveguide, and this frequency is dependent on the dimensions of the waveguide.
Frequency - (Measured in Hertz) - Frequency the number of waves that pass a fixed point in unit time; also, the number of cycles or vibrations undergone during one unit of time by a body in periodic motion in a waveguide.

STEP 1: Convert Input(s) to Base Unit

Conductivity: 0.1 Siemens per Meter --> 0.1 Siemens per Meter No Conversion Required
Intrinsic Impedance: 0.152 Kilohm --> 152 Ohm (Check conversion here)
Cut-off Frequency: 2.72 Hertz --> 2.72 Hertz No Conversion Required
Frequency: 55.02 Hertz --> 55.02 Hertz No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

α_TE = (σ*η)/(2*sqrt(1-((f_c)/(f))^2)) --> (0.1*152)/(2*sqrt(1-((2.72)/(55.02))^2))

Evaluating ... ...

α_TE = 7.60930416019089

STEP 3: Convert Result to Output's Unit

7.60930416019089 Decibel per Meter --> No Conversion Required

FINAL ANSWER

7.60930416019089 ≈ 7.609304 Decibel per Meter <-- Attenuation for the TEmn mode

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electronics » Microwave Theory » Microwave Devices » Attenuation for TEmn mode

Credits

Created by Sai Sudha Vani Priya Lanka

Dayananda Sagar University (DSU), Bengaluru, Karnataka, India-560100

Sai Sudha Vani Priya Lanka has created this Calculator and 10+ more calculators!

Verified by Parminder Singh

Chandigarh University (CU), Punjab

Parminder Singh has verified this Calculator and 500+ more calculators!

< Microwave Devices Calculators

Force Exerted on Particle

LaTeX Go Force Exerted on Particle = (Charge of a Particle*Velocity of a Charged Particle)*Magnetic Flux Density

Characteristic Wave Impedance

LaTeX Go Characteristic Wave Impedance = (Angular Frequency*Magnetic Permeability)/(Phase Constant)

Quality Factor

LaTeX Go Quality Factor = (Angular Frequency*Maximum Stored Energy)/(Average Power Loss)

Power Losses for TEM Mode

LaTeX Go Power Losses for the TEM Mode = 2*Attenuation Constant*Transmitting Power

Attenuation for TEmn mode Formula

LaTeX Go

Attenuation for the TEmn mode = (Conductivity*Intrinsic Impedance)/(2*sqrt(1-((Cut-off Frequency)/(Frequency))^2))
α_TE = (σ*η)/(2*sqrt(1-((f_c)/(f))^2))

What is TEM mode of propagation?

The TEM mode of propagation is the mode of propagation in coaxial lines, two-open-wire lines, stripline transmission lines, and parallel plate lines. In a non-dispersive medium with TEM propagation, the characteristic impedance and phase velocity remain constant. However, multiple dielectrics in coax and striplines lead to non-pure TEM modes.

How to Calculate Attenuation for TEmn mode?

Attenuation for TEmn mode calculator uses Attenuation for the TEmn mode = (Conductivity*Intrinsic Impedance)/(2*sqrt(1-((Cut-off Frequency)/(Frequency))^2)) to calculate the Attenuation for the TEmn mode, Attenuation for TEmn mode is the attenuation calculated in the rectangular waveguide for the TEmn mode. Attenuation is defined as the reduction in the amplitude of a signal as it travels through a medium. Attenuation can be caused by transmission loss, reflection, or absorption. Attenuation for the TEmn mode is denoted by α_TE symbol.

How to calculate Attenuation for TEmn mode using this online calculator? To use this online calculator for Attenuation for TEmn mode, enter Conductivity (σ), Intrinsic Impedance (η), Cut-off Frequency (f_c) & Frequency (f) and hit the calculate button. Here is how the Attenuation for TEmn mode calculation can be explained with given input values -> 7.694802 = (0.1*152)/(2*sqrt(1-((2.72)/(55.02))^2)).

FAQ

What is Attenuation for TEmn mode?

Attenuation for TEmn mode is the attenuation calculated in the rectangular waveguide for the TEmn mode. Attenuation is defined as the reduction in the amplitude of a signal as it travels through a medium. Attenuation can be caused by transmission loss, reflection, or absorption and is represented as α_TE = (σ*η)/(2*sqrt(1-((f_c)/(f))^2)) or Attenuation for the TEmn mode = (Conductivity*Intrinsic Impedance)/(2*sqrt(1-((Cut-off Frequency)/(Frequency))^2)). Conductivity (or specific conductance) of an electrolyte solution is a measure of its ability to conduct electricity. The SI unit of conductivity is siemens per meter (S/m), Intrinsic impedance describes the magnitude of the magnetic and electric fields present in the free space, Cut-off Frequency of rectangular waveguide defines wave propagation modes in the rectangular waveguide, and this frequency is dependent on the dimensions of the waveguide & Frequency the number of waves that pass a fixed point in unit time; also, the number of cycles or vibrations undergone during one unit of time by a body in periodic motion in a waveguide.

How to calculate Attenuation for TEmn mode?

Attenuation for TEmn mode is the attenuation calculated in the rectangular waveguide for the TEmn mode. Attenuation is defined as the reduction in the amplitude of a signal as it travels through a medium. Attenuation can be caused by transmission loss, reflection, or absorption is calculated using Attenuation for the TEmn mode = (Conductivity*Intrinsic Impedance)/(2*sqrt(1-((Cut-off Frequency)/(Frequency))^2)). To calculate Attenuation for TEmn mode, you need Conductivity (σ), Intrinsic Impedance (η), Cut-off Frequency (f_c) & Frequency (f). With our tool, you need to enter the respective value for Conductivity, Intrinsic Impedance, Cut-off Frequency & Frequency and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search