Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation Solution

STEP 0: Pre-Calculation Summary
Formula Used
Atmospheric Pressure = 10^(8.07131-(1730.63/(233.426+Boiling Point)))
Patm = 10^(8.07131-(1730.63/(233.426+bp)))
This formula uses 2 Variables
Variables Used
Atmospheric Pressure - (Measured in Pascal) - Atmospheric pressure, also known as barometric pressure, is the pressure within the atmosphere of Earth.
Boiling Point - (Measured in Kelvin) - Boiling Point is the temperature at which a liquid starts to boil and transforms to vapor.
STEP 1: Convert Input(s) to Base Unit
Boiling Point: 300 Kelvin --> 300 Kelvin No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Patm = 10^(8.07131-(1730.63/(233.426+bp))) --> 10^(8.07131-(1730.63/(233.426+300)))
Evaluating ... ...
Patm = 67133.9898947167
STEP 3: Convert Result to Output's Unit
67133.9898947167 Pascal --> No Conversion Required
FINAL ANSWER
67133.9898947167 67133.99 Pascal <-- Atmospheric Pressure
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Prerana Bakli
University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA
Prerana Bakli has created this Calculator and 800+ more calculators!
Verifier Image
Verified by Prashant Singh
K J Somaiya College of science (K J Somaiya), Mumbai
Prashant Singh has verified this Calculator and 500+ more calculators!

Antoine Equation Calculators

Pressure using Saturated Temperature in Antoine Equation
​ LaTeX ​ Go Pressure = exp(Antoine Equation Constant, A-(Antoine Equation Constant, B/(Saturated Temperature+Antoine Equation Constant, C)))
Saturated Pressure using Antoine Equation
​ LaTeX ​ Go Saturated Pressure = exp(Antoine Equation Constant, A-(Antoine Equation Constant, B/(Temperature+Antoine Equation Constant, C)))
Temperature using Saturated Pressure in Antoine equation
​ LaTeX ​ Go Temperature = (Antoine Equation Constant, B/(Antoine Equation Constant, A-ln(Saturated Pressure)))-Antoine Equation Constant, C
Saturated Temperature using Antoine Equation
​ LaTeX ​ Go Saturated Temperature = (Antoine Equation Constant, B/(Antoine Equation Constant, A-ln(Pressure)))-Antoine Equation Constant, C

Antoine Equation Calculators

Pressure using Saturated Temperature in Antoine Equation
​ LaTeX ​ Go Pressure = exp(Antoine Equation Constant, A-(Antoine Equation Constant, B/(Saturated Temperature+Antoine Equation Constant, C)))
Saturated Pressure using Antoine Equation
​ LaTeX ​ Go Saturated Pressure = exp(Antoine Equation Constant, A-(Antoine Equation Constant, B/(Temperature+Antoine Equation Constant, C)))
Boiling Temperature of Water for Atmospheric Pressure using Antoine Equation
​ LaTeX ​ Go Boiling Point = (1730.63/(8.07131-log10(Atmospheric Pressure)))-233.426
Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation
​ LaTeX ​ Go Atmospheric Pressure = 10^(8.07131-(1730.63/(233.426+Boiling Point)))

Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation Formula

​LaTeX ​Go
Atmospheric Pressure = 10^(8.07131-(1730.63/(233.426+Boiling Point)))
Patm = 10^(8.07131-(1730.63/(233.426+bp)))

Define Antoine Equation.

The Antoine equation is a class of semi-empirical correlations describing the relation between vapor pressure and temperature for pure substances. The Antoine equation is derived from the Clausius–Clapeyron relation. The equation was presented in 1888 by the French engineer Louis Charles Antoine (1825–1897). The August equation describes a linear relation between the logarithm of the pressure and the reciprocal temperature. This assumes a temperature-independent heat of vaporization. The Antoine equation allows an improved, but still inexact description of the change of the heat of vaporization with the temperature.

What is Duhem’s Theorem?

For any closed system formed from known amounts of prescribed chemical species, the equilibrium state is completely determined when any two independent variables are fixed. The two independent variables subject to specification may in general be either intensive or extensive. However, the number of independent intensive variables is given by the phase rule. Thus when F = 1, at least one of the two variables must be extensive, and when F = 0, both must be extensive.

How to Calculate Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation?

Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation calculator uses Atmospheric Pressure = 10^(8.07131-(1730.63/(233.426+Boiling Point))) to calculate the Atmospheric Pressure, The Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation formula is defined as is the pressure within the atmosphere of Earth. The standard atmosphere (symbol: atm) is a unit of pressure defined as 101,325 Pa. Atmospheric Pressure is denoted by Patm symbol.

How to calculate Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation using this online calculator? To use this online calculator for Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation, enter Boiling Point (bp) and hit the calculate button. Here is how the Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation calculation can be explained with given input values -> 67133.99 = 10^(8.07131-(1730.63/(233.426+300))).

FAQ

What is Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation?
The Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation formula is defined as is the pressure within the atmosphere of Earth. The standard atmosphere (symbol: atm) is a unit of pressure defined as 101,325 Pa and is represented as Patm = 10^(8.07131-(1730.63/(233.426+bp))) or Atmospheric Pressure = 10^(8.07131-(1730.63/(233.426+Boiling Point))). Boiling Point is the temperature at which a liquid starts to boil and transforms to vapor.
How to calculate Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation?
The Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation formula is defined as is the pressure within the atmosphere of Earth. The standard atmosphere (symbol: atm) is a unit of pressure defined as 101,325 Pa is calculated using Atmospheric Pressure = 10^(8.07131-(1730.63/(233.426+Boiling Point))). To calculate Atmospheric Pressure of Water at Boiling Temperature using Antoine Equation, you need Boiling Point (bp). With our tool, you need to enter the respective value for Boiling Point and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!