Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length Calculator

✖The Perimeter of T Shape is the total length of all the boundary lines of the T Shape.ⓘ Perimeter of T Shape [P]			+10% -10%
✖The Beam Thickness of T Shape is the thickness of the upper beam of the T Shape which is horizontally directed.ⓘ Beam Thickness of T Shape [t_Beam]			+10% -10%
✖The Shaft Length of T Shape is the length of the shaft of the T Shape which is vertically directed and join with the upper beam of T Shape at the center of the beam.ⓘ Shaft Length of T Shape [l_Shaft]			+10% -10%
✖The Shaft Thickness of T Shape is the thickness of the shaft of the T Shape which is vertically directed and join with the upper beam of T Shape at the center of the beam.ⓘ Shaft Thickness of T Shape [t_Shaft]			+10% -10%

✖The Arm Length of T Shape is the length of any of the two arms of the T Shape which are actually the left and right wings of the T Shape form when the vertical shaft joins the upper beam.ⓘ Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length [l_Arm]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download 2D Geometry Formula PDF PDF Image

Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length Solution

STEP 0: Pre-Calculation Summary

Formula Used

Arm Length of T Shape = (Perimeter of T Shape/2-(Beam Thickness of T Shape+Shaft Length of T Shape)-Shaft Thickness of T Shape)/2
l_Arm = (P/2-(t_Beam+l_Shaft)-t_Shaft)/2
This formula uses 5 Variables

Variables Used

Arm Length of T Shape - (Measured in Meter) - The Arm Length of T Shape is the length of any of the two arms of the T Shape which are actually the left and right wings of the T Shape form when the vertical shaft joins the upper beam.
Perimeter of T Shape - (Measured in Meter) - The Perimeter of T Shape is the total length of all the boundary lines of the T Shape.
Beam Thickness of T Shape - (Measured in Meter) - The Beam Thickness of T Shape is the thickness of the upper beam of the T Shape which is horizontally directed.
Shaft Length of T Shape - (Measured in Meter) - The Shaft Length of T Shape is the length of the shaft of the T Shape which is vertically directed and join with the upper beam of T Shape at the center of the beam.
Shaft Thickness of T Shape - (Measured in Meter) - The Shaft Thickness of T Shape is the thickness of the shaft of the T Shape which is vertically directed and join with the upper beam of T Shape at the center of the beam.

STEP 1: Convert Input(s) to Base Unit

Perimeter of T Shape: 50 Meter --> 50 Meter No Conversion Required
Beam Thickness of T Shape: 2 Meter --> 2 Meter No Conversion Required
Shaft Length of T Shape: 8 Meter --> 8 Meter No Conversion Required
Shaft Thickness of T Shape: 3 Meter --> 3 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

l_Arm = (P/2-(t_Beam+l_Shaft)-t_Shaft)/2 --> (50/2-(2+8)-3)/2

Evaluating ... ...

l_Arm = 6

STEP 3: Convert Result to Output's Unit

6 Meter --> No Conversion Required

FINAL ANSWER

6 Meter <-- Arm Length of T Shape

(Calculation completed in 00.004 seconds)

You are here -

Home » Math » Geometry » 2D Geometry » T Shape » Length of T Shape » Arm Length of T Shape » Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length

Credits

Created by Shweta Patil

Walchand College of Engineering (WCE), Sangli

Shweta Patil has created this Calculator and 2500+ more calculators!

Verified by Mona Gladys

St Joseph's College (SJC), Bengaluru

Mona Gladys has verified this Calculator and 1800+ more calculators!

< Arm Length of T Shape Calculators

Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length

LaTeX Go Arm Length of T Shape = (Perimeter of T Shape/2-(Beam Thickness of T Shape+Shaft Length of T Shape)-Shaft Thickness of T Shape)/2

Arm Length of T Shape

LaTeX Go Arm Length of T Shape = (Beam Length of T Shape-Shaft Thickness of T Shape)/2

Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length Formula

LaTeX Go

Arm Length of T Shape = (Perimeter of T Shape/2-(Beam Thickness of T Shape+Shaft Length of T Shape)-Shaft Thickness of T Shape)/2
l_Arm = (P/2-(t_Beam+l_Shaft)-t_Shaft)/2

What is T Shape?

This is a special shape of a concave octagon, made of two perpendicular rectangles. The vertical shaft is placed in the middle of the horizontal beam.

How to Calculate Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length?

Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length calculator uses Arm Length of T Shape = (Perimeter of T Shape/2-(Beam Thickness of T Shape+Shaft Length of T Shape)-Shaft Thickness of T Shape)/2 to calculate the Arm Length of T Shape, The Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length formula is defined as the length of any of the two arms of the T Shape which are actually the left and right wings of the T Shape form when the vertical shaft joins the upper beam, and calculated using its perimeter, arm and shaft thickness, shaft length. Arm Length of T Shape is denoted by l_Arm symbol.

How to calculate Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length using this online calculator? To use this online calculator for Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length, enter Perimeter of T Shape (P), Beam Thickness of T Shape (t_Beam), Shaft Length of T Shape (l_Shaft) & Shaft Thickness of T Shape (t_Shaft) and hit the calculate button. Here is how the Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length calculation can be explained with given input values -> 6 = (50/2-(2+8)-3)/2.

FAQ

What is Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length?

The Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length formula is defined as the length of any of the two arms of the T Shape which are actually the left and right wings of the T Shape form when the vertical shaft joins the upper beam, and calculated using its perimeter, arm and shaft thickness, shaft length and is represented as l_Arm = (P/2-(t_Beam+l_Shaft)-t_Shaft)/2 or Arm Length of T Shape = (Perimeter of T Shape/2-(Beam Thickness of T Shape+Shaft Length of T Shape)-Shaft Thickness of T Shape)/2. The Perimeter of T Shape is the total length of all the boundary lines of the T Shape, The Beam Thickness of T Shape is the thickness of the upper beam of the T Shape which is horizontally directed, The Shaft Length of T Shape is the length of the shaft of the T Shape which is vertically directed and join with the upper beam of T Shape at the center of the beam & The Shaft Thickness of T Shape is the thickness of the shaft of the T Shape which is vertically directed and join with the upper beam of T Shape at the center of the beam.

How to calculate Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length?

The Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length formula is defined as the length of any of the two arms of the T Shape which are actually the left and right wings of the T Shape form when the vertical shaft joins the upper beam, and calculated using its perimeter, arm and shaft thickness, shaft length is calculated using Arm Length of T Shape = (Perimeter of T Shape/2-(Beam Thickness of T Shape+Shaft Length of T Shape)-Shaft Thickness of T Shape)/2. To calculate Arm Length of T Shape given Perimeter, Arm and Shaft Thickness, Shaft Length, you need Perimeter of T Shape (P), Beam Thickness of T Shape (t_Beam), Shaft Length of T Shape (l_Shaft) & Shaft Thickness of T Shape (t_Shaft). With our tool, you need to enter the respective value for Perimeter of T Shape, Beam Thickness of T Shape, Shaft Length of T Shape & Shaft Thickness of T Shape and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Arm Length of T Shape?

In this formula, Arm Length of T Shape uses Perimeter of T Shape, Beam Thickness of T Shape, Shaft Length of T Shape & Shaft Thickness of T Shape. We can use 1 other way(s) to calculate the same, which is/are as follows -

Arm Length of T Shape = (Beam Length of T Shape-Shaft Thickness of T Shape)/2

Home

FREE PDFs

🔍 Search