Area of Well when Discharged from Open Well is Considered Calculator

✖The Yield from an Open Well is referred as flow discharge into well under a depression head H.ⓘ Yield from an Open Well [Q_Y]			+10% -10%
✖The Specific Capacity is referred as amount of water furnished under a standard unit head.ⓘ Specific Capacity [K_s]			+10% -10%
✖The Depression Head is defined as height of the bottom of a well above the datum.ⓘ Depression Head [H]			+10% -10%

✖The Area of the Well is referred as land area around a well that is influenced by pumping.ⓘ Area of Well when Discharged from Open Well is Considered [A]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Open Wells Formulas PDF PDF Image

Area of Well when Discharged from Open Well is Considered Solution

STEP 0: Pre-Calculation Summary

Formula Used

Area of the Well = Yield from an Open Well/(Specific Capacity*Depression Head)
A = Q_Y/(K_s*H)
This formula uses 4 Variables

Variables Used

Area of the Well - (Measured in Square Meter) - The Area of the Well is referred as land area around a well that is influenced by pumping.
Yield from an Open Well - (Measured in Cubic Meter per Second) - The Yield from an Open Well is referred as flow discharge into well under a depression head H.
Specific Capacity - The Specific Capacity is referred as amount of water furnished under a standard unit head.
Depression Head - (Measured in Meter) - The Depression Head is defined as height of the bottom of a well above the datum.

STEP 1: Convert Input(s) to Base Unit

Yield from an Open Well: 105 Cubic Meter per Second --> 105 Cubic Meter per Second No Conversion Required
Specific Capacity: 0.75 --> No Conversion Required
Depression Head: 7 Meter --> 7 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A = Q_Y/(K_s*H) --> 105/(0.75*7)

Evaluating ... ...

A = 20

STEP 3: Convert Result to Output's Unit

20 Square Meter --> No Conversion Required

FINAL ANSWER

20 Square Meter <-- Area of the Well

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Open Wells » Recuperation Test » Area of Well when Discharged from Open Well is Considered

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Recuperation Test Calculators

Proportionality Constant per unit Well Area of Aquifer

LaTeX Go Proportionality Constant = Area of the Well*((1/Time Interval)*ln(Drawdown at the Start of Recuperation/Drawdown at a Time))

Equation for Time Interval

LaTeX Go Time Interval = (Area of the Well/Proportionality Constant)*ln(Drawdown at the Start of Recuperation/Drawdown at a Time)

Area of Well given Time Interval

LaTeX Go Area of the Well = Proportionality Constant*Time Interval/ln(Drawdown at the Start of Recuperation/Drawdown at a Time)

Discharge from Open Well under Depression Head

LaTeX Go Yield from an Open Well = Specific Capacity*Area of the Well*Depression Head

Area of Well when Discharged from Open Well is Considered Formula

LaTeX Go

Area of the Well = Yield from an Open Well/(Specific Capacity*Depression Head)
A = Q_Y/(K_s*H)

What is Discharge In Hydrology?

Discharge is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material in addition to the water itself.

How to Calculate Area of Well when Discharged from Open Well is Considered?

Area of Well when Discharged from Open Well is Considered calculator uses Area of the Well = Yield from an Open Well/(Specific Capacity*Depression Head) to calculate the Area of the Well, The Area of Well when Discharged from Open Well is Considered formula is defined as the land area around a well that is influenced by pumping. Area of the Well is denoted by A symbol.

How to calculate Area of Well when Discharged from Open Well is Considered using this online calculator? To use this online calculator for Area of Well when Discharged from Open Well is Considered, enter Yield from an Open Well (Q_Y), Specific Capacity (K_s) & Depression Head (H) and hit the calculate button. Here is how the Area of Well when Discharged from Open Well is Considered calculation can be explained with given input values -> 20 = 105/(0.75*7).

FAQ

What is Area of Well when Discharged from Open Well is Considered?

The Area of Well when Discharged from Open Well is Considered formula is defined as the land area around a well that is influenced by pumping and is represented as A = Q_Y/(K_s*H) or Area of the Well = Yield from an Open Well/(Specific Capacity*Depression Head). The Yield from an Open Well is referred as flow discharge into well under a depression head H, The Specific Capacity is referred as amount of water furnished under a standard unit head & The Depression Head is defined as height of the bottom of a well above the datum.

How to calculate Area of Well when Discharged from Open Well is Considered?

The Area of Well when Discharged from Open Well is Considered formula is defined as the land area around a well that is influenced by pumping is calculated using Area of the Well = Yield from an Open Well/(Specific Capacity*Depression Head). To calculate Area of Well when Discharged from Open Well is Considered, you need Yield from an Open Well (Q_Y), Specific Capacity (K_s) & Depression Head (H). With our tool, you need to enter the respective value for Yield from an Open Well, Specific Capacity & Depression Head and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Area of the Well?

In this formula, Area of the Well uses Yield from an Open Well, Specific Capacity & Depression Head. We can use 2 other way(s) to calculate the same, which is/are as follows -

Area of the Well = Proportionality Constant*Time Interval/ln(Drawdown at the Start of Recuperation/Drawdown at a Time)
Area of the Well = Proportionality Constant/Specific Capacity

Home

FREE PDFs

🔍 Search