Area of Flange or Area above Considered Section Calculator

✖Width of Beam Section is the width of the rectangular cross-section of the beam parallel to the axis in consideration.ⓘ Width of Beam Section [B]			+10% -10%
✖The Outer Depth of I section is a measure of distance, the distance between the outer bars of the I-section.ⓘ Outer Depth of I section [D]			+10% -10%
✖Distance from Neutral Axis is the distance of the considered layer from the neutral layer.ⓘ Distance from Neutral Axis [y]			+10% -10%

✖Area of Section above Considered Level is the geometric area of a section of a system (such as a tank, basin, or duct) above a specific level. This level is often a reference point for analysis.ⓘ Area of Flange or Area above Considered Section [A_abv]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Shear Stress in I Section Formulas PDF PDF Image

Area of Flange or Area above Considered Section Solution

STEP 0: Pre-Calculation Summary

Formula Used

Area of Section above Considered Level = Width of Beam Section*(Outer Depth of I section/2-Distance from Neutral Axis)
A_abv = B*(D/2-y)
This formula uses 4 Variables

Variables Used

Area of Section above Considered Level - (Measured in Square Meter) - Area of Section above Considered Level is the geometric area of a section of a system (such as a tank, basin, or duct) above a specific level. This level is often a reference point for analysis.
Width of Beam Section - (Measured in Meter) - Width of Beam Section is the width of the rectangular cross-section of the beam parallel to the axis in consideration.
Outer Depth of I section - (Measured in Meter) - The Outer Depth of I section is a measure of distance, the distance between the outer bars of the I-section.
Distance from Neutral Axis - (Measured in Meter) - Distance from Neutral Axis is the distance of the considered layer from the neutral layer.

STEP 1: Convert Input(s) to Base Unit

Width of Beam Section: 100 Millimeter --> 0.1 Meter (Check conversion here)
Outer Depth of I section: 9000 Millimeter --> 9 Meter (Check conversion here)
Distance from Neutral Axis: 5 Millimeter --> 0.005 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_abv = B*(D/2-y) --> 0.1*(9/2-0.005)

Evaluating ... ...

A_abv = 0.4495

STEP 3: Convert Result to Output's Unit

0.4495 Square Meter -->449500 Square Millimeter (Check conversion here)

FINAL ANSWER

449500 Square Millimeter <-- Area of Section above Considered Level

(Calculation completed in 00.021 seconds)

You are here -

Home » Physics » Strength of Materials » Shear Stress In Beam » Shear Stress Distribution for Different Sections » Shear Stress in I Section » Mechanical » Shear Stress Distribution in Flange » Area of Flange or Area above Considered Section

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Dipto Mandal

Indian Institute of Information Technology (IIIT), Guwahati

Dipto Mandal has verified this Calculator and 400+ more calculators!

< Shear Stress Distribution in Flange Calculators

Inner Depth of I-section given Shear Stress in Lower Edge of Flange

LaTeX Go Inner Depth of I Section = sqrt(Outer Depth of I section^2-(8*Moment of Inertia of Area of Section)/Shear Force on Beam*Shear Stress in Beam)

Outer Depth of I section given Shear Stress in Lower Edge of Flange

LaTeX Go Outer Depth of I section = sqrt((8*Moment of Inertia of Area of Section)/Shear Force on Beam*Shear Stress in Beam+Inner Depth of I Section^2)

Moment of Inertia of I section given Shear Stress in Lower Edge of Flange

LaTeX Go Moment of Inertia of Area of Section = Shear Force on Beam/(8*Shear Stress in Beam)*(Outer Depth of I section^2-Inner Depth of I Section^2)

Shear Force in Lower Edge of Flange in I-section

LaTeX Go Shear Force on Beam = (8*Moment of Inertia of Area of Section*Shear Stress in Beam)/(Outer Depth of I section^2-Inner Depth of I Section^2)

Area of Flange or Area above Considered Section Formula

LaTeX Go

Area of Section above Considered Level = Width of Beam Section*(Outer Depth of I section/2-Distance from Neutral Axis)
A_abv = B*(D/2-y)

Where is Shear Stress Distribution in a Beam Section is Maximum?

In a rectangular beam:

Maximum shear stress occurs at the neutral axis (the horizontal axis through the centroid of the cross-section), which is typically at the mid-height of the beam.
Zero shear stress occurs at the outermost fibers (the top and bottom edges) of the beam's cross-section.
This means the shear stress is highest in the middle of the cross-section and decreases to zero as you move toward the top and bottom surfaces.

How to Calculate Area of Flange or Area above Considered Section?

Area of Flange or Area above Considered Section calculator uses Area of Section above Considered Level = Width of Beam Section*(Outer Depth of I section/2-Distance from Neutral Axis) to calculate the Area of Section above Considered Level, The Area of Flange or Area above Considered Section formula is defined as a measure of the cross-sectional area above the considered section in an I-shaped beam, which is essential in calculating the shear stress and other structural properties of the beam. Area of Section above Considered Level is denoted by A_abv symbol.

How to calculate Area of Flange or Area above Considered Section using this online calculator? To use this online calculator for Area of Flange or Area above Considered Section, enter Width of Beam Section (B), Outer Depth of I section (D) & Distance from Neutral Axis (y) and hit the calculate button. Here is how the Area of Flange or Area above Considered Section calculation can be explained with given input values -> 4.5E+11 = 0.1*(9/2-0.005).

FAQ

What is Area of Flange or Area above Considered Section?

The Area of Flange or Area above Considered Section formula is defined as a measure of the cross-sectional area above the considered section in an I-shaped beam, which is essential in calculating the shear stress and other structural properties of the beam and is represented as A_abv = B*(D/2-y) or Area of Section above Considered Level = Width of Beam Section*(Outer Depth of I section/2-Distance from Neutral Axis). Width of Beam Section is the width of the rectangular cross-section of the beam parallel to the axis in consideration, The Outer Depth of I section is a measure of distance, the distance between the outer bars of the I-section & Distance from Neutral Axis is the distance of the considered layer from the neutral layer.

How to calculate Area of Flange or Area above Considered Section?

The Area of Flange or Area above Considered Section formula is defined as a measure of the cross-sectional area above the considered section in an I-shaped beam, which is essential in calculating the shear stress and other structural properties of the beam is calculated using Area of Section above Considered Level = Width of Beam Section*(Outer Depth of I section/2-Distance from Neutral Axis). To calculate Area of Flange or Area above Considered Section, you need Width of Beam Section (B), Outer Depth of I section (D) & Distance from Neutral Axis (y). With our tool, you need to enter the respective value for Width of Beam Section, Outer Depth of I section & Distance from Neutral Axis and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search