Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area Calculator

✖The Environmental Discharge refers to the release of any waste or hazardous materials into the environment from a point source.ⓘ Environmental Discharge [Q_e]			+10% -10%
✖The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.ⓘ Settling Velocity [V_s]			+10% -10%

✖The Area of a sedimentation tank refers to the surface area of the tank where sedimentation, or the settling of suspended particles, occurs.ⓘ Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area [A]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Sedimentation Tank Formulas PDF PDF Image

Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area Solution

STEP 0: Pre-Calculation Summary

Formula Used

Area = Environmental Discharge/Settling Velocity
A = Q_e/V_s
This formula uses 3 Variables

Variables Used

Area - (Measured in Square Meter) - The Area of a sedimentation tank refers to the surface area of the tank where sedimentation, or the settling of suspended particles, occurs.
Environmental Discharge - (Measured in Cubic Meter per Second) - The Environmental Discharge refers to the release of any waste or hazardous materials into the environment from a point source.
Settling Velocity - (Measured in Meter per Second) - The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.

STEP 1: Convert Input(s) to Base Unit

Environmental Discharge: 40 Cubic Meter per Second --> 40 Cubic Meter per Second No Conversion Required
Settling Velocity: 1.5 Meter per Second --> 1.5 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A = Q_e/V_s --> 40/1.5

Evaluating ... ...

A = 26.6666666666667

STEP 3: Convert Result to Output's Unit

26.6666666666667 Square Meter --> No Conversion Required

FINAL ANSWER

26.6666666666667 ≈ 26.66667 Square Meter <-- Area

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Water 1 Sedimentation » Sedimentation Tank » Area of Sedimentation Tank » Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has verified this Calculator and 500+ more calculators!

< Area of Sedimentation Tank Calculators

Area of Tank given Height at Outlet Zone with respect to Area of Tank

LaTeX Go Area = Discharge*Outer Height/(Height of Crack*Falling Speed)

Cross-Sectional Area given Surface Area with respect to Darcy Weishbach Friction Factor

LaTeX Go Cross-Sectional Area = Area*sqrt(Darcy Friction Factor/8)

Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area

LaTeX Go Area = Environmental Discharge/Settling Velocity

Cross-Sectional Area of Sedimentation Tank

LaTeX Go Area = Width*Height of Crack

Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area Formula

LaTeX Go

Area = Environmental Discharge/Settling Velocity
A = Q_e/V_s

What is Sedimentation?

Sedimentation is the tendency for particles in suspension to settle out of the fluid in which they are entrained and come to rest against a barrier. This is due to their motion through the fluid in response to the forces acting on them: these forces can be due to gravity, centrifugal acceleration, or electromagnetism.

How to Calculate Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area?

Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area calculator uses Area = Environmental Discharge/Settling Velocity to calculate the Area, The Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area formula is defined as the quantity that expresses extent of two-dimensional region, shape, or planar lamina, in plane. Area is denoted by A symbol.

How to calculate Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area using this online calculator? To use this online calculator for Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area, enter Environmental Discharge (Q_e) & Settling Velocity (V_s) and hit the calculate button. Here is how the Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area calculation can be explained with given input values -> 26.66667 = 40/1.5.

FAQ

What is Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area?

The Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area formula is defined as the quantity that expresses extent of two-dimensional region, shape, or planar lamina, in plane and is represented as A = Q_e/V_s or Area = Environmental Discharge/Settling Velocity. The Environmental Discharge refers to the release of any waste or hazardous materials into the environment from a point source & The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.

How to calculate Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area?

The Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area formula is defined as the quantity that expresses extent of two-dimensional region, shape, or planar lamina, in plane is calculated using Area = Environmental Discharge/Settling Velocity. To calculate Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area, you need Environmental Discharge (Q_e) & Settling Velocity (V_s). With our tool, you need to enter the respective value for Environmental Discharge & Settling Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Area?

In this formula, Area uses Environmental Discharge & Settling Velocity. We can use 2 other way(s) to calculate the same, which is/are as follows -

Area = Discharge*Outer Height/(Height of Crack*Falling Speed)
Area = Width*Height of Crack

Home

FREE PDFs

🔍 Search