Area of Tank for Discharge Rate with respect to Settling Velocity Calculator

✖The Environmental Discharge refers to the release of any waste or hazardous materials into the environment from a point source.ⓘ Environmental Discharge [Q_e]			+10% -10%
✖The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.ⓘ Settling Velocity [V_s]			+10% -10%

✖The Tank Area refers to the surface area of the tank where water flows and sedimentation occurs.ⓘ Area of Tank for Discharge Rate with respect to Settling Velocity [A_mm]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Sedimentation Tank Formulas PDF PDF Image

Area of Tank for Discharge Rate with respect to Settling Velocity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tank Area = Environmental Discharge/(864000*Settling Velocity)
A_mm = Q_e/(864000*V_s)
This formula uses 3 Variables

Variables Used

Tank Area - (Measured in Square Meter) - The Tank Area refers to the surface area of the tank where water flows and sedimentation occurs.
Environmental Discharge - (Measured in Cubic Meter per Second) - The Environmental Discharge refers to the release of any waste or hazardous materials into the environment from a point source.
Settling Velocity - (Measured in Meter per Second) - The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.

STEP 1: Convert Input(s) to Base Unit

Environmental Discharge: 40 Cubic Meter per Second --> 40 Cubic Meter per Second No Conversion Required
Settling Velocity: 1.5 Meter per Second --> 1.5 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_mm = Q_e/(864000*V_s) --> 40/(864000*1.5)

Evaluating ... ...

A_mm = 3.08641975308642E-05

STEP 3: Convert Result to Output's Unit

3.08641975308642E-05 Square Meter -->30.8641975308642 Square Millimeter (Check conversion here)

FINAL ANSWER

30.8641975308642 ≈ 30.8642 Square Millimeter <-- Tank Area

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Water 1 Sedimentation » Sedimentation Tank » Area of Sedimentation Tank » Area of Tank for Discharge Rate with respect to Settling Velocity

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has verified this Calculator and 500+ more calculators!

< Area of Sedimentation Tank Calculators

Area of Tank given Height at Outlet Zone with respect to Area of Tank

LaTeX Go Area = Discharge*Outer Height/(Height of Crack*Falling Speed)

Cross-Sectional Area given Surface Area with respect to Darcy Weishbach Friction Factor

LaTeX Go Cross-Sectional Area = Area*sqrt(Darcy Friction Factor/8)

Area of Tank given Vertical Falling Speed in Sedimentation Tank with respect to Area

LaTeX Go Area = Environmental Discharge/Settling Velocity

Cross-Sectional Area of Sedimentation Tank

LaTeX Go Area = Width*Height of Crack

Area of Tank for Discharge Rate with respect to Settling Velocity Formula

LaTeX Go

Tank Area = Environmental Discharge/(864000*Settling Velocity)
A_mm = Q_e/(864000*V_s)

What is Settling Velocity ?

The settling velocity (also referred to as the “sedimentation velocity”) is defined as the terminal velocity of a particle in still fluid.

How to Calculate Area of Tank for Discharge Rate with respect to Settling Velocity?

Area of Tank for Discharge Rate with respect to Settling Velocity calculator uses Tank Area = Environmental Discharge/(864000*Settling Velocity) to calculate the Tank Area, The Area of Tank for Discharge Rate with respect to Settling Velocity formula is defined as the discharge rate based on the relationship between the discharge rate (Q), the area (A) of the tank, and the velocity (V) of the fluid. Tank Area is denoted by A_mm symbol.

How to calculate Area of Tank for Discharge Rate with respect to Settling Velocity using this online calculator? To use this online calculator for Area of Tank for Discharge Rate with respect to Settling Velocity, enter Environmental Discharge (Q_e) & Settling Velocity (V_s) and hit the calculate button. Here is how the Area of Tank for Discharge Rate with respect to Settling Velocity calculation can be explained with given input values -> 3.1E+7 = 40/(864000*1.5).

FAQ

What is Area of Tank for Discharge Rate with respect to Settling Velocity?

The Area of Tank for Discharge Rate with respect to Settling Velocity formula is defined as the discharge rate based on the relationship between the discharge rate (Q), the area (A) of the tank, and the velocity (V) of the fluid and is represented as A_mm = Q_e/(864000*V_s) or Tank Area = Environmental Discharge/(864000*Settling Velocity). The Environmental Discharge refers to the release of any waste or hazardous materials into the environment from a point source & The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.

How to calculate Area of Tank for Discharge Rate with respect to Settling Velocity?

The Area of Tank for Discharge Rate with respect to Settling Velocity formula is defined as the discharge rate based on the relationship between the discharge rate (Q), the area (A) of the tank, and the velocity (V) of the fluid is calculated using Tank Area = Environmental Discharge/(864000*Settling Velocity). To calculate Area of Tank for Discharge Rate with respect to Settling Velocity, you need Environmental Discharge (Q_e) & Settling Velocity (V_s). With our tool, you need to enter the respective value for Environmental Discharge & Settling Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search