Area of T Shape given all Sides except Beam Thickness Calculator

✖The Beam Length of T Shape is the length from left end to right end of the upper beam of the T Shape which is horizontally directed.ⓘ Beam Length of T Shape [l_Beam]			+10% -10%
✖The Height of T Shape is the perpendicular distance from the bottom most point to the top most point of the T Shape.ⓘ Height of T Shape [h]			+10% -10%
✖The Shaft Length of T Shape is the length of the shaft of the T Shape which is vertically directed and join with the upper beam of T Shape at the center of the beam.ⓘ Shaft Length of T Shape [l_Shaft]			+10% -10%
✖The Shaft Thickness of T Shape is the thickness of the shaft of the T Shape which is vertically directed and join with the upper beam of T Shape at the center of the beam.ⓘ Shaft Thickness of T Shape [t_Shaft]			+10% -10%

✖The Area of T Shape is the total quantity of plane enclosed by the boundary of the T Shape.ⓘ Area of T Shape given all Sides except Beam Thickness [A]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download 2D Geometry Formula PDF PDF Image

Area of T Shape given all Sides except Beam Thickness Solution

STEP 0: Pre-Calculation Summary

Formula Used

Area of T Shape = (Beam Length of T Shape*(Height of T Shape-Shaft Length of T Shape))+(Shaft Length of T Shape*Shaft Thickness of T Shape)
A = (l_Beam*(h-l_Shaft))+(l_Shaft*t_Shaft)
This formula uses 5 Variables

Variables Used

Area of T Shape - (Measured in Square Meter) - The Area of T Shape is the total quantity of plane enclosed by the boundary of the T Shape.
Beam Length of T Shape - (Measured in Meter) - The Beam Length of T Shape is the length from left end to right end of the upper beam of the T Shape which is horizontally directed.
Height of T Shape - (Measured in Meter) - The Height of T Shape is the perpendicular distance from the bottom most point to the top most point of the T Shape.
Shaft Length of T Shape - (Measured in Meter) - The Shaft Length of T Shape is the length of the shaft of the T Shape which is vertically directed and join with the upper beam of T Shape at the center of the beam.
Shaft Thickness of T Shape - (Measured in Meter) - The Shaft Thickness of T Shape is the thickness of the shaft of the T Shape which is vertically directed and join with the upper beam of T Shape at the center of the beam.

STEP 1: Convert Input(s) to Base Unit

Beam Length of T Shape: 15 Meter --> 15 Meter No Conversion Required
Height of T Shape: 10 Meter --> 10 Meter No Conversion Required
Shaft Length of T Shape: 8 Meter --> 8 Meter No Conversion Required
Shaft Thickness of T Shape: 3 Meter --> 3 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A = (l_Beam*(h-l_Shaft))+(l_Shaft*t_Shaft) --> (15*(10-8))+(8*3)

Evaluating ... ...

A = 54

STEP 3: Convert Result to Output's Unit

54 Square Meter --> No Conversion Required

FINAL ANSWER

54 Square Meter <-- Area of T Shape

(Calculation completed in 00.004 seconds)

You are here -

Home » Math » Geometry » 2D Geometry » T Shape » Area of T Shape » Area of T Shape given all Sides except Beam Thickness

Credits

Created by Shweta Patil

Walchand College of Engineering (WCE), Sangli

Shweta Patil has created this Calculator and 2500+ more calculators!

Verified by Mona Gladys

St Joseph's College (SJC), Bengaluru

Mona Gladys has verified this Calculator and 1800+ more calculators!

< Area of T Shape Calculators

Area of T Shape given Arm, Shaft Length, Beam and Shaft Thickness

LaTeX Go Area of T Shape = (((2*Arm Length of T Shape)+Shaft Thickness of T Shape)*Beam Thickness of T Shape)+(Shaft Length of T Shape*Shaft Thickness of T Shape)

Area of T Shape given Beam Length, Thickness, Arm and Shaft Length

LaTeX Go Area of T Shape = (Beam Length of T Shape*Beam Thickness of T Shape)+(Shaft Length of T Shape*(Beam Length of T Shape-(2*Arm Length of T Shape)))

Area of T Shape given all Sides except Beam Thickness

LaTeX Go Area of T Shape = (Beam Length of T Shape*(Height of T Shape-Shaft Length of T Shape))+(Shaft Length of T Shape*Shaft Thickness of T Shape)

Area of T Shape

LaTeX Go Area of T Shape = (Beam Length of T Shape*Beam Thickness of T Shape)+(Shaft Length of T Shape*Shaft Thickness of T Shape)

Area of T Shape given all Sides except Beam Thickness Formula

LaTeX Go

Area of T Shape = (Beam Length of T Shape*(Height of T Shape-Shaft Length of T Shape))+(Shaft Length of T Shape*Shaft Thickness of T Shape)
A = (l_Beam*(h-l_Shaft))+(l_Shaft*t_Shaft)

What is T Shape?

This is a special shape of a concave octagon, made of two perpendicular rectangles. The vertical shaft is placed in the middle of the horizontal beam.

How to Calculate Area of T Shape given all Sides except Beam Thickness?

Area of T Shape given all Sides except Beam Thickness calculator uses Area of T Shape = (Beam Length of T Shape*(Height of T Shape-Shaft Length of T Shape))+(Shaft Length of T Shape*Shaft Thickness of T Shape) to calculate the Area of T Shape, The Area of T Shape given all Sides except Beam Thickness formula is defined as the total quantity of plane enclosed by the boundary of the T Shape and calculated using all measurements of T Shape except beam thickness. Area of T Shape is denoted by A symbol.

How to calculate Area of T Shape given all Sides except Beam Thickness using this online calculator? To use this online calculator for Area of T Shape given all Sides except Beam Thickness, enter Beam Length of T Shape (l_Beam), Height of T Shape (h), Shaft Length of T Shape (l_Shaft) & Shaft Thickness of T Shape (t_Shaft) and hit the calculate button. Here is how the Area of T Shape given all Sides except Beam Thickness calculation can be explained with given input values -> 54 = (15*(10-8))+(8*3).

FAQ

What is Area of T Shape given all Sides except Beam Thickness?

The Area of T Shape given all Sides except Beam Thickness formula is defined as the total quantity of plane enclosed by the boundary of the T Shape and calculated using all measurements of T Shape except beam thickness and is represented as A = (l_Beam*(h-l_Shaft))+(l_Shaft*t_Shaft) or Area of T Shape = (Beam Length of T Shape*(Height of T Shape-Shaft Length of T Shape))+(Shaft Length of T Shape*Shaft Thickness of T Shape). The Beam Length of T Shape is the length from left end to right end of the upper beam of the T Shape which is horizontally directed, The Height of T Shape is the perpendicular distance from the bottom most point to the top most point of the T Shape, The Shaft Length of T Shape is the length of the shaft of the T Shape which is vertically directed and join with the upper beam of T Shape at the center of the beam & The Shaft Thickness of T Shape is the thickness of the shaft of the T Shape which is vertically directed and join with the upper beam of T Shape at the center of the beam.

How to calculate Area of T Shape given all Sides except Beam Thickness?

The Area of T Shape given all Sides except Beam Thickness formula is defined as the total quantity of plane enclosed by the boundary of the T Shape and calculated using all measurements of T Shape except beam thickness is calculated using Area of T Shape = (Beam Length of T Shape*(Height of T Shape-Shaft Length of T Shape))+(Shaft Length of T Shape*Shaft Thickness of T Shape). To calculate Area of T Shape given all Sides except Beam Thickness, you need Beam Length of T Shape (l_Beam), Height of T Shape (h), Shaft Length of T Shape (l_Shaft) & Shaft Thickness of T Shape (t_Shaft). With our tool, you need to enter the respective value for Beam Length of T Shape, Height of T Shape, Shaft Length of T Shape & Shaft Thickness of T Shape and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Area of T Shape?

In this formula, Area of T Shape uses Beam Length of T Shape, Height of T Shape, Shaft Length of T Shape & Shaft Thickness of T Shape. We can use 3 other way(s) to calculate the same, which is/are as follows -

Area of T Shape = (Beam Length of T Shape*Beam Thickness of T Shape)+(Shaft Length of T Shape*Shaft Thickness of T Shape)
Area of T Shape = (((2*Arm Length of T Shape)+Shaft Thickness of T Shape)*Beam Thickness of T Shape)+(Shaft Length of T Shape*Shaft Thickness of T Shape)
Area of T Shape = (Beam Length of T Shape*Beam Thickness of T Shape)+(Shaft Length of T Shape*(Beam Length of T Shape-(2*Arm Length of T Shape)))

Home

FREE PDFs

🔍 Search