Area of Section of Open Channel Considering Condition of Minimum Specific Energy Calculator

✖Discharge of Channel is the rate of flow of a liquid.ⓘ Discharge of Channel [Q]			+10% -10%
✖Top Width is defined as the width at the top of the section.ⓘ Top Width [T]			+10% -10%

✖Cross-Sectional Area of Channel is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Area of Section of Open Channel Considering Condition of Minimum Specific Energy [A_cs]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Specific Energy and Critical Depth Formulas PDF PDF Image

Area of Section of Open Channel Considering Condition of Minimum Specific Energy Solution

STEP 0: Pre-Calculation Summary

Formula Used

Cross-Sectional Area of Channel = (Discharge of Channel*Top Width/[g])^(1/3)
A_cs = (Q*T/[g])^(1/3)
This formula uses 1 Constants, 3 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Cross-Sectional Area of Channel - (Measured in Square Meter) - Cross-Sectional Area of Channel is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Discharge of Channel - (Measured in Cubic Meter per Second) - Discharge of Channel is the rate of flow of a liquid.
Top Width - (Measured in Meter) - Top Width is defined as the width at the top of the section.

STEP 1: Convert Input(s) to Base Unit

Discharge of Channel: 14 Cubic Meter per Second --> 14 Cubic Meter per Second No Conversion Required
Top Width: 2.1 Meter --> 2.1 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_cs = (Q*T/[g])^(1/3) --> (14*2.1/[g])^(1/3)

Evaluating ... ...

A_cs = 1.4419234946896

STEP 3: Convert Result to Output's Unit

1.4419234946896 Square Meter --> No Conversion Required

FINAL ANSWER

1.4419234946896 ≈ 1.441923 Square Meter <-- Cross-Sectional Area of Channel

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Flow in Open Channels » Specific Energy and Critical Depth » Area of Section of Open Channel Considering Condition of Minimum Specific Energy

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Specific Energy and Critical Depth Calculators

Mean Velocity of Flow for Total Energy per Unit Weight of Water in Flow Section

LaTeX Go Mean Velocity = sqrt((Total Energy-(Depth of Flow+Height above Datum))*2*[g])

Depth of Flow given Total Energy per Unit Weight of Water in Flow Section

LaTeX Go Depth of Flow = Total Energy-(((Mean Velocity^2)/(2*[g]))+Height above Datum)

Datum Height for Total Energy per unit Weight of Water in Flow Section

LaTeX Go Height above Datum = Total Energy-(((Mean Velocity^2)/(2*[g]))+Depth of Flow)

Total Energy per unit Weight of Water in Flow Section

LaTeX Go Total Energy = ((Mean Velocity^2)/(2*[g]))+Depth of Flow+Height above Datum

Area of Section of Open Channel Considering Condition of Minimum Specific Energy Formula

LaTeX Go

Cross-Sectional Area of Channel = (Discharge of Channel*Top Width/[g])^(1/3)
A_cs = (Q*T/[g])^(1/3)

What is Specific Energy?

Specific energy or massic energy is energy per unit mass. It is also sometimes called gravimetric energy density, or just energy density though energy density more precisely means energy per unit volume.

How to Calculate Area of Section of Open Channel Considering Condition of Minimum Specific Energy?

Area of Section of Open Channel Considering Condition of Minimum Specific Energy calculator uses Cross-Sectional Area of Channel = (Discharge of Channel*Top Width/[g])^(1/3) to calculate the Cross-Sectional Area of Channel, The Area of Section of Open Channel Considering Condition of Minimum Specific Energy formula is defined as an area of the sectional flow path in the open channel. Cross-Sectional Area of Channel is denoted by A_cs symbol.

How to calculate Area of Section of Open Channel Considering Condition of Minimum Specific Energy using this online calculator? To use this online calculator for Area of Section of Open Channel Considering Condition of Minimum Specific Energy, enter Discharge of Channel (Q) & Top Width (T) and hit the calculate button. Here is how the Area of Section of Open Channel Considering Condition of Minimum Specific Energy calculation can be explained with given input values -> 1.441923 = (14*2.1/[g])^(1/3).

FAQ

What is Area of Section of Open Channel Considering Condition of Minimum Specific Energy?

The Area of Section of Open Channel Considering Condition of Minimum Specific Energy formula is defined as an area of the sectional flow path in the open channel and is represented as A_cs = (Q*T/[g])^(1/3) or Cross-Sectional Area of Channel = (Discharge of Channel*Top Width/[g])^(1/3). Discharge of Channel is the rate of flow of a liquid & Top Width is defined as the width at the top of the section.

How to calculate Area of Section of Open Channel Considering Condition of Minimum Specific Energy?

The Area of Section of Open Channel Considering Condition of Minimum Specific Energy formula is defined as an area of the sectional flow path in the open channel is calculated using Cross-Sectional Area of Channel = (Discharge of Channel*Top Width/[g])^(1/3). To calculate Area of Section of Open Channel Considering Condition of Minimum Specific Energy, you need Discharge of Channel (Q) & Top Width (T). With our tool, you need to enter the respective value for Discharge of Channel & Top Width and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Cross-Sectional Area of Channel?

In this formula, Cross-Sectional Area of Channel uses Discharge of Channel & Top Width. We can use 2 other way(s) to calculate the same, which is/are as follows -

Cross-Sectional Area of Channel = Discharge of Channel/sqrt(2*[g]*(Total Energy-Depth of Flow))
Cross-Sectional Area of Channel = (Discharge of Channel*Discharge of Channel*Top Width/[g])^(1/3)

Home

FREE PDFs

🔍 Search