Area of Parallel Fillet Weld given Throat Thickness Calculator

✖The Length of Weld is the linear distance of each weld segment.ⓘ Length of Weld [l]			+10% -10%
✖The Throat Thickness is the shortest distance from the root to the face of the weld.ⓘ Throat Thickness [t_throat]			+10% -10%

✖Weld Bed Area is that area which is prepared by joining two metals for welding.ⓘ Area of Parallel Fillet Weld given Throat Thickness [A_{weld bed}]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Area of Parallel Fillet Weld given Throat Thickness Solution

STEP 0: Pre-Calculation Summary

Formula Used

Weld Bed Area = 2*Length of Weld*Throat Thickness
A_{weld bed} = 2*l*t_throat
This formula uses 3 Variables

Variables Used

Weld Bed Area - (Measured in Square Meter) - Weld Bed Area is that area which is prepared by joining two metals for welding.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of each weld segment.
Throat Thickness - (Measured in Meter) - The Throat Thickness is the shortest distance from the root to the face of the weld.

STEP 1: Convert Input(s) to Base Unit

Length of Weld: 8 Millimeter --> 0.008 Meter (Check conversion here)
Throat Thickness: 50 Millimeter --> 0.05 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_{weld bed} = 2*l*t_throat --> 2*0.008*0.05

Evaluating ... ...

A_{weld bed} = 0.0008

STEP 3: Convert Result to Output's Unit

0.0008 Square Meter -->800 Square Millimeter (Check conversion here)

FINAL ANSWER

800 Square Millimeter <-- Weld Bed Area

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Types of Welded Joints » Mechanical » Area of Fillet Weld » Area of Parallel Fillet Weld given Throat Thickness

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Area of Fillet Weld Calculators

Area of Double Fillet Weld given Tensile Force

LaTeX Go Area of Double Fillet Weld = Tensile Force on Welded Plates/Tensile Stress

Area of Fillet Weld in given Thickness of Plate for Double Fillet Lap Joint

LaTeX Go Weld Bed Area = 1.414*Length of Weld*Thickness of Plate

Area of Fillet Weld given Thickness of Plate for Single Fillet Lap Joint

LaTeX Go Weld Bed Area = 0.707*Length of Weld*Thickness of Plate

Area of Fillet Weld given Throat Thickness for Double Fillet Lap Joint

LaTeX Go Weld Bed Area = 2*Length of Weld*Throat Thickness

Area of Parallel Fillet Weld given Throat Thickness Formula

LaTeX Go

Weld Bed Area = 2*Length of Weld*Throat Thickness
A_{weld bed} = 2*l*t_throat

What is tensile strength with example?

Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. The tensile strength of a material is the maximum amount of tensile stress that it can take before failure, for example, breaking.

How to Calculate Area of Parallel Fillet Weld given Throat Thickness?

Area of Parallel Fillet Weld given Throat Thickness calculator uses Weld Bed Area = 2*Length of Weld*Throat Thickness to calculate the Weld Bed Area, Area of parallel fillet weld given throat thickness is determined by multiplying the length of the weld by the depth of the weld. Weld Bed Area is denoted by A_{weld bed} symbol.

How to calculate Area of Parallel Fillet Weld given Throat Thickness using this online calculator? To use this online calculator for Area of Parallel Fillet Weld given Throat Thickness, enter Length of Weld (l) & Throat Thickness (t_throat) and hit the calculate button. Here is how the Area of Parallel Fillet Weld given Throat Thickness calculation can be explained with given input values -> 8E+8 = 2*0.008*0.05.

FAQ

What is Area of Parallel Fillet Weld given Throat Thickness?

Area of parallel fillet weld given throat thickness is determined by multiplying the length of the weld by the depth of the weld and is represented as A_{weld bed} = 2*l*t_throat or Weld Bed Area = 2*Length of Weld*Throat Thickness. The Length of Weld is the linear distance of each weld segment & The Throat Thickness is the shortest distance from the root to the face of the weld.

How to calculate Area of Parallel Fillet Weld given Throat Thickness?

Area of parallel fillet weld given throat thickness is determined by multiplying the length of the weld by the depth of the weld is calculated using Weld Bed Area = 2*Length of Weld*Throat Thickness. To calculate Area of Parallel Fillet Weld given Throat Thickness, you need Length of Weld (l) & Throat Thickness (t_throat). With our tool, you need to enter the respective value for Length of Weld & Throat Thickness and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Weld Bed Area?

In this formula, Weld Bed Area uses Length of Weld & Throat Thickness. We can use 3 other way(s) to calculate the same, which is/are as follows -

Weld Bed Area = 1.414*Length of Weld*Thickness of Plate
Weld Bed Area = 0.707*Length of Weld*Thickness of Plate
Weld Bed Area = 2*Length of Weld*Throat Thickness

Home

FREE PDFs

🔍 Search