Area of plunger Solution

STEP 0: Pre-Calculation Summary
Formula Used
Area of Plunger = Force Acting on Plunger/Pressure Intensity
a = F'/pi
This formula uses 3 Variables
Variables Used
Area of Plunger - (Measured in Square Meter) - Area of Plunger is defined as the area where the force acts equally in all sides so that the weight is lifted by the plunger.
Force Acting on Plunger - (Measured in Newton) - Force Acting on Plunger is defined as the push or pull upon the plunger resulting from the object's interaction with another object.
Pressure Intensity - (Measured in Pascal) - The Pressure intensity at a point is defined as the external normal force per unit area. The SI unit of pressure is Pascal.
STEP 1: Convert Input(s) to Base Unit
Force Acting on Plunger: 505 Newton --> 505 Newton No Conversion Required
Pressure Intensity: 10.1 Pascal --> 10.1 Pascal No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
a = F'/pi --> 505/10.1
Evaluating ... ...
a = 50
STEP 3: Convert Result to Output's Unit
50 Square Meter --> No Conversion Required
FINAL ANSWER
50 Square Meter <-- Area of Plunger
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Shareef Alex
velagapudi ramakrishna siddhartha engineering college (vr siddhartha engineering college), vijayawada
Shareef Alex has created this Calculator and 100+ more calculators!
Verifier Image
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

Incompressible Flow Characteristics Calculators

Stream function at point
​ LaTeX ​ Go Stream Function = -(Strength of Doublet/(2*pi))*(Length Y/((Length X^2)+(Length Y^2)))
Radius at any point considering radial velocity
​ LaTeX ​ Go Radius 1 = Strength of Source/(2*pi*Radial Velocity)
Radial velocity at any radius
​ LaTeX ​ Go Radial Velocity = Strength of Source/(2*pi*Radius 1)
Strength of source for radial velocity and at any radius
​ LaTeX ​ Go Strength of Source = Radial Velocity*2*pi*Radius 1

Area of plunger Formula

​LaTeX ​Go
Area of Plunger = Force Acting on Plunger/Pressure Intensity
a = F'/pi

What is the function of the plunger?

The plunger displaces the available volume through its own volume and increases the pressure of the fluid to be pumped. The suction valve closes and the pressure valve opens the way into the process area for the pressurized fluid.

What is the function of the press plunger in a hydraulic press?

The hydraulic press works by pressing a small amount of force onto the Plunger which presses the fluid below. This pressure is then distributed evenly which in turn raises the Ram. The pressure between the Plunger and the Ram then works to crush the item placed between them.

How to Calculate Area of plunger?

Area of plunger calculator uses Area of Plunger = Force Acting on Plunger/Pressure Intensity to calculate the Area of Plunger, Area of plunger is the surface area of the part that makes contact with another surface, often a disc shape. If the plunger is circular, the area is proportional to the square of its radius. Area of Plunger is denoted by a symbol.

How to calculate Area of plunger using this online calculator? To use this online calculator for Area of plunger, enter Force Acting on Plunger (F') & Pressure Intensity (pi) and hit the calculate button. Here is how the Area of plunger calculation can be explained with given input values -> 49.50495 = 505/10.1.

FAQ

What is Area of plunger?
Area of plunger is the surface area of the part that makes contact with another surface, often a disc shape. If the plunger is circular, the area is proportional to the square of its radius and is represented as a = F'/pi or Area of Plunger = Force Acting on Plunger/Pressure Intensity. Force Acting on Plunger is defined as the push or pull upon the plunger resulting from the object's interaction with another object & The Pressure intensity at a point is defined as the external normal force per unit area. The SI unit of pressure is Pascal.
How to calculate Area of plunger?
Area of plunger is the surface area of the part that makes contact with another surface, often a disc shape. If the plunger is circular, the area is proportional to the square of its radius is calculated using Area of Plunger = Force Acting on Plunger/Pressure Intensity. To calculate Area of plunger, you need Force Acting on Plunger (F') & Pressure Intensity (pi). With our tool, you need to enter the respective value for Force Acting on Plunger & Pressure Intensity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!