Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement Solution

STEP 0: Pre-Calculation Summary
Formula Used
Transformed Area of Concrete = (Prestress at Transfer/Stress in Concrete Section)
AT = (Po/fconcrete)
This formula uses 3 Variables
Variables Used
Transformed Area of Concrete - (Measured in Square Meter) - Transformed Area of Concrete is the modified or altered surface of a concrete structure resulting from changes or treatments.
Prestress at Transfer - (Measured in Newton) - Prestress at Transfer is the prestress force on the section at the transfer stage but after the short-term loss.
Stress in Concrete Section - (Measured in Pascal) - Stress in Concrete Section is the force per unit area of the concrete section considered.
STEP 1: Convert Input(s) to Base Unit
Prestress at Transfer: 100 Kilonewton --> 100000 Newton (Check conversion ​here)
Stress in Concrete Section: 16.6 Megapascal --> 16600000 Pascal (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
AT = (Po/fconcrete) --> (100000/16600000)
Evaluating ... ...
AT = 0.00602409638554217
STEP 3: Convert Result to Output's Unit
0.00602409638554217 Square Meter -->6024.09638554217 Square Millimeter (Check conversion ​here)
FINAL ANSWER
6024.09638554217 6024.096 Square Millimeter <-- Transformed Area of Concrete
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has created this Calculator and 500+ more calculators!
Verifier Image
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

At Transfer Calculators

Area of Non-Prestressed Reinforcement given Stress in Concrete
​ LaTeX ​ Go Area of Reinforcement = ((Prestress at Transfer/Stress in Concrete Section)+Transformed Area of Concrete)*(Modulus of Elasticity Concrete/Modulus of Elasticity of Steel)
Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement
​ LaTeX ​ Go Transformed Area of Concrete = (Prestress at Transfer/Stress in Concrete Section)
Stress in Concrete in Member without Non-Prestressed Reinforcement
​ LaTeX ​ Go Stress in Concrete Section = (Prestress at Transfer/Transformed Area of Concrete)

Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement Formula

​LaTeX ​Go
Transformed Area of Concrete = (Prestress at Transfer/Stress in Concrete Section)
AT = (Po/fconcrete)

What are the Stages of Loading in Prestressed member?

1) Initial: It can be subdivided into two stages.
a) During tensioning of steel
b) At transfer of prestress to concrete.
2) Intermediate: This includes the loads during transportation of the prestressed members.
3) Final: It can be subdivided into two stages.
a) At service, during operation.
b) At ultimate, during extreme events.

What are the steps for analyzing the Prestressed member?

1) Permissible prestress based on allowable stresses at transfer.
2) Stresses under service loads. These are compared with allowable stresses under service conditions.
3) Ultimate strength. This is compared with the demand under factored loads.
4) The entire axial load versus deformation behaviour.

How to Calculate Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement?

Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement calculator uses Transformed Area of Concrete = (Prestress at Transfer/Stress in Concrete Section) to calculate the Transformed Area of Concrete, The Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement is defined as the area of concrete when the prestress force at transfer and stress in concrete is given. Transformed Area of Concrete is denoted by AT symbol.

How to calculate Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement using this online calculator? To use this online calculator for Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement, enter Prestress at Transfer (Po) & Stress in Concrete Section (fconcrete) and hit the calculate button. Here is how the Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement calculation can be explained with given input values -> 6E+9 = (100000/16600000).

FAQ

What is Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement?
The Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement is defined as the area of concrete when the prestress force at transfer and stress in concrete is given and is represented as AT = (Po/fconcrete) or Transformed Area of Concrete = (Prestress at Transfer/Stress in Concrete Section). Prestress at Transfer is the prestress force on the section at the transfer stage but after the short-term loss & Stress in Concrete Section is the force per unit area of the concrete section considered.
How to calculate Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement?
The Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement is defined as the area of concrete when the prestress force at transfer and stress in concrete is given is calculated using Transformed Area of Concrete = (Prestress at Transfer/Stress in Concrete Section). To calculate Area of Concrete for Known Stress in Concrete without Non-Prestressed Reinforcement, you need Prestress at Transfer (Po) & Stress in Concrete Section (fconcrete). With our tool, you need to enter the respective value for Prestress at Transfer & Stress in Concrete Section and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!