Aperture Time for Rising Input Calculator

✖Setup Time at high logic is defined as the setup time when the logic is at the high output.ⓘ Setup Time at High Logic [T_setup1]			+10% -10%
✖Hold Time at Low logic is defined as the hold time at which logic or output falls to low or 0.ⓘ Hold Time at Low Logic [T_hold0]			+10% -10%

✖Aperture Time for Rising Input is defined as the time during the input when the logic rises to 1 or high output.ⓘ Aperture Time for Rising Input [t_ar]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download CMOS Time Characteristics Formulas PDF PDF Image

Aperture Time for Rising Input Solution

STEP 0: Pre-Calculation Summary

Formula Used

Aperture Time for Rising Input = Setup Time at High Logic+Hold Time at Low Logic
t_ar = T_setup1+T_hold0
This formula uses 3 Variables

Variables Used

Aperture Time for Rising Input - (Measured in Second) - Aperture Time for Rising Input is defined as the time during the input when the logic rises to 1 or high output.
Setup Time at High Logic - (Measured in Second) - Setup Time at high logic is defined as the setup time when the logic is at the high output.
Hold Time at Low Logic - (Measured in Second) - Hold Time at Low logic is defined as the hold time at which logic or output falls to low or 0.

STEP 1: Convert Input(s) to Base Unit

Setup Time at High Logic: 5 Nanosecond --> 5E-09 Second (Check conversion here)
Hold Time at Low Logic: 9 Nanosecond --> 9E-09 Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_ar = T_setup1+T_hold0 --> 5E-09+9E-09

Evaluating ... ...

t_ar = 1.4E-08

STEP 3: Convert Result to Output's Unit

1.4E-08 Second -->14 Nanosecond (Check conversion here)

FINAL ANSWER

14 Nanosecond <-- Aperture Time for Rising Input

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » CMOS Design and Applications » CMOS Time Characteristics » Aperture Time for Rising Input

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< CMOS Time Characteristics Calculators

Aperture Time for Falling Input

LaTeX Go Aperture Time for Falling Input = Setup Time at Low Logic+Hold Time at High Logic

Setup Time at Low Logic

LaTeX Go Setup Time at Low Logic = Aperture Time for Falling Input-Hold Time at High Logic

Aperture Time for Rising Input

LaTeX Go Aperture Time for Rising Input = Setup Time at High Logic+Hold Time at Low Logic

Setup Time at High Logic

LaTeX Go Setup Time at High Logic = Aperture Time for Rising Input-Hold Time at Low Logic

Aperture Time for Rising Input Formula

LaTeX Go

Aperture Time for Rising Input = Setup Time at High Logic+Hold Time at Low Logic
t_ar = T_setup1+T_hold0

What is the function of tie-high and tie-low cells?

Tie-high and tie-low are used to connect the transistors of the gate by using either the power or the ground. When the gates are connected using the power or ground then it can be turned off and on due to the power bounce from the ground.

How to Calculate Aperture Time for Rising Input?

Aperture Time for Rising Input calculator uses Aperture Time for Rising Input = Setup Time at High Logic+Hold Time at Low Logic to calculate the Aperture Time for Rising Input, Aperture Time for Rising Input refers to the time during which an analog-to-digital converter (ADC) captures an incoming analog signal as it rises. Aperture Time for Rising Input is denoted by t_ar symbol.

How to calculate Aperture Time for Rising Input using this online calculator? To use this online calculator for Aperture Time for Rising Input, enter Setup Time at High Logic (T_setup1) & Hold Time at Low Logic (T_hold0) and hit the calculate button. Here is how the Aperture Time for Rising Input calculation can be explained with given input values -> 1.4E+10 = 5E-09+9E-09.

FAQ

What is Aperture Time for Rising Input?

Aperture Time for Rising Input refers to the time during which an analog-to-digital converter (ADC) captures an incoming analog signal as it rises and is represented as t_ar = T_setup1+T_hold0 or Aperture Time for Rising Input = Setup Time at High Logic+Hold Time at Low Logic. Setup Time at high logic is defined as the setup time when the logic is at the high output & Hold Time at Low logic is defined as the hold time at which logic or output falls to low or 0.

How to calculate Aperture Time for Rising Input?

Aperture Time for Rising Input refers to the time during which an analog-to-digital converter (ADC) captures an incoming analog signal as it rises is calculated using Aperture Time for Rising Input = Setup Time at High Logic+Hold Time at Low Logic. To calculate Aperture Time for Rising Input, you need Setup Time at High Logic (T_setup1) & Hold Time at Low Logic (T_hold0). With our tool, you need to enter the respective value for Setup Time at High Logic & Hold Time at Low Logic and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search