Angle of Dip for Compass Surveying Calculator

✖Distance between Two Points is defined as the length of space between two points. For finding the distance when curvature effects are considered, the value must be considered in kilometres.ⓘ Distance between Two Points [D]			+10% -10%
✖Earth radius in km is the distance from the center of Earth to a point on or near its surface. Approximating earth as a spheroid, the radius ranges from 6,357 km to 6,378 km.ⓘ Earth Radius in km [R]			+10% -10%

✖Dip Angle is also known as the magnetic dip and is defined as the angle that is made by the earth's magnetic field lines with the horizontal.ⓘ Angle of Dip for Compass Surveying [θ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Levelling Formulas PDF PDF Image

Angle of Dip for Compass Surveying Solution

STEP 0: Pre-Calculation Summary

Formula Used

Dip Angle = Distance between Two Points/Earth Radius in km*(180/pi)
θ = D/R*(180/pi)
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Dip Angle - (Measured in Radian) - Dip Angle is also known as the magnetic dip and is defined as the angle that is made by the earth's magnetic field lines with the horizontal.
Distance between Two Points - (Measured in Meter) - Distance between Two Points is defined as the length of space between two points. For finding the distance when curvature effects are considered, the value must be considered in kilometres.
Earth Radius in km - Earth radius in km is the distance from the center of Earth to a point on or near its surface. Approximating earth as a spheroid, the radius ranges from 6,357 km to 6,378 km.

STEP 1: Convert Input(s) to Base Unit

Distance between Two Points: 35.5 Meter --> 35.5 Meter No Conversion Required
Earth Radius in km: 6370 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

θ = D/R*(180/pi) --> 35.5/6370*(180/pi)

Evaluating ... ...

θ = 0.319309289280129

STEP 3: Convert Result to Output's Unit

0.319309289280129 Radian -->18.2950746350767 Degree (Check conversion here)

FINAL ANSWER

18.2950746350767 ≈ 18.29507 Degree <-- Dip Angle

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Surveying Formulas » Vertical Control » Levelling » Angle of Dip for Compass Surveying

Credits

Created by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has created this Calculator and 500+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Levelling Calculators

Distance between Two points under Curvature and Refraction

LaTeX Go Distance between Two Points = (2*Earth Radius in km*Error due to Curvature+(Error due to Curvature^2))^(1/2)

Distance for small errors under Curvature and Refraction

LaTeX Go Distance between Two Points = sqrt(2*Earth Radius in km*Error due to Curvature)

Error Due to Curvature Effect

LaTeX Go Error due to Curvature = Distance between Two Points^2/(2*Earth Radius in km)

Combined Error Due to Curvature and Refraction

LaTeX Go Combined Error = 0.0673*Distance between Two Points^2

Angle of Dip for Compass Surveying Formula

LaTeX Go

Dip Angle = Distance between Two Points/Earth Radius in km*(180/pi)
θ = D/R*(180/pi)

What is Dip of the Horizon?

Dip of the horizon is the angular depression of the apparent horizon below the true horizon, caused by the curvature of the Earth's surface.

How to Calculate Angle of Dip for Compass Surveying?

Angle of Dip for Compass Surveying calculator uses Dip Angle = Distance between Two Points/Earth Radius in km*(180/pi) to calculate the Dip Angle, Angle of Dip for Compass Surveying is also known as the magnetic dip and is defined as the angle that is made by the earth's magnetic field lines with the horizontal. The angle of dip is said to be positive when the magnetic field points downwards. Dip Angle is denoted by θ symbol.

How to calculate Angle of Dip for Compass Surveying using this online calculator? To use this online calculator for Angle of Dip for Compass Surveying, enter Distance between Two Points (D) & Earth Radius in km (R) and hit the calculate button. Here is how the Angle of Dip for Compass Surveying calculation can be explained with given input values -> 1048.231 = 35.5/6370*(180/pi).

FAQ

What is Angle of Dip for Compass Surveying?

Angle of Dip for Compass Surveying is also known as the magnetic dip and is defined as the angle that is made by the earth's magnetic field lines with the horizontal. The angle of dip is said to be positive when the magnetic field points downwards and is represented as θ = D/R*(180/pi) or Dip Angle = Distance between Two Points/Earth Radius in km*(180/pi). Distance between Two Points is defined as the length of space between two points. For finding the distance when curvature effects are considered, the value must be considered in kilometres & Earth radius in km is the distance from the center of Earth to a point on or near its surface. Approximating earth as a spheroid, the radius ranges from 6,357 km to 6,378 km.

How to calculate Angle of Dip for Compass Surveying?

Angle of Dip for Compass Surveying is also known as the magnetic dip and is defined as the angle that is made by the earth's magnetic field lines with the horizontal. The angle of dip is said to be positive when the magnetic field points downwards is calculated using Dip Angle = Distance between Two Points/Earth Radius in km*(180/pi). To calculate Angle of Dip for Compass Surveying, you need Distance between Two Points (D) & Earth Radius in km (R). With our tool, you need to enter the respective value for Distance between Two Points & Earth Radius in km and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search