Ambient atmospheric pressure Calculator

✖Pressure in Flushing Hole is the pressure in hole during EDM machining.ⓘ Pressure in Flushing Hole [P₁]			+10% -10%
✖Net force acting on the electrode is the net force acting on the electrode.ⓘ Net Force Acting on the Electrode [F_net]			+10% -10%
✖Radius of the electrodes is defined as the radius of the electrode used for unconventional machining by EDM.ⓘ Radius of the Electrodes [R₀]			+10% -10%
✖Radius of flushing hole is the radius of flushing hole in EDM.ⓘ Radius of Flushing Hole [R₁]			+10% -10%

✖Atmospheric pressure, also known as barometric pressure, is the pressure within the atmosphere of Earth.ⓘ Ambient atmospheric pressure [P_atm]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Ambient atmospheric pressure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Atmospheric Pressure = Pressure in Flushing Hole-(Net Force Acting on the Electrode*(2*ln(Radius of the Electrodes/Radius of Flushing Hole)))/(pi*(Radius of the Electrodes^2-Radius of Flushing Hole^2))
P_atm = P₁-(F_net*(2*ln(R₀/R₁)))/(pi*(R₀^2-R₁^2))
This formula uses 1 Constants, 1 Functions, 5 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Functions Used

ln - The natural logarithm, also known as the logarithm to the base e, is the inverse function of the natural exponential function., ln(Number)

Variables Used

Atmospheric Pressure - (Measured in Pascal) - Atmospheric pressure, also known as barometric pressure, is the pressure within the atmosphere of Earth.
Pressure in Flushing Hole - (Measured in Pascal) - Pressure in Flushing Hole is the pressure in hole during EDM machining.
Net Force Acting on the Electrode - (Measured in Newton) - Net force acting on the electrode is the net force acting on the electrode.
Radius of the Electrodes - (Measured in Meter) - Radius of the electrodes is defined as the radius of the electrode used for unconventional machining by EDM.
Radius of Flushing Hole - (Measured in Meter) - Radius of flushing hole is the radius of flushing hole in EDM.

STEP 1: Convert Input(s) to Base Unit

Pressure in Flushing Hole: 176.66 Newton per Square Centimeter --> 1766600 Pascal (Check conversion here)
Net Force Acting on the Electrode: 6 Kilonewton --> 6000 Newton (Check conversion here)
Radius of the Electrodes: 5 Centimeter --> 0.05 Meter (Check conversion here)
Radius of Flushing Hole: 2 Centimeter --> 0.02 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_atm = P₁-(F_net*(2*ln(R₀/R₁)))/(pi*(R₀^2-R₁^2)) --> 1766600-(6000*(2*ln(0.05/0.02)))/(pi*(0.05^2-0.02^2))

Evaluating ... ...

P_atm = 99946.2938621456

STEP 3: Convert Result to Output's Unit

99946.2938621456 Pascal -->9.99462938621456 Newton per Square Centimeter (Check conversion here)

FINAL ANSWER

9.99462938621456 ≈ 9.994629 Newton per Square Centimeter <-- Atmospheric Pressure

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Unconventional machining processes » Electro Discharge Machining (EDM) » Net force acting on the electrode » Ambient atmospheric pressure

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Sai Venkata Phanindra Chary Arendra

Vallurupalli Nageswara Rao Vignana Jyothi Institute of Engineering and Technology (VNRVJIET), Hyderabad

Sai Venkata Phanindra Chary Arendra has verified this Calculator and 300+ more calculators!

< Net force acting on the electrode Calculators

Pressure in flushing hole net force electrode

LaTeX Go Pressure in Flushing Hole = Atmospheric Pressure+(Net Force Acting on the Electrode*(2*ln(Radius of the Electrodes/Radius of Flushing Hole)))/(pi*(Radius of the Electrodes^2-Radius of Flushing Hole^2))

Net force acting on electrode

LaTeX Go Net Force Acting on the Electrode = (pi*(Pressure in Flushing Hole-Atmospheric Pressure)*(Radius of the Electrodes^2-Radius of Flushing Hole^2))/(2*ln(Radius of the Electrodes/Radius of Flushing Hole))

Ambient atmospheric pressure

LaTeX Go Atmospheric Pressure = Pressure in Flushing Hole-(Net Force Acting on the Electrode*(2*ln(Radius of the Electrodes/Radius of Flushing Hole)))/(pi*(Radius of the Electrodes^2-Radius of Flushing Hole^2))

Ambient atmospheric pressure Formula

LaTeX Go

What does the term Flushing mean in Electric Discharge Machining?

Flushing refers to the method in which the dielectric fluid flows between the tool and the work gap.The efficiency of machining depends to a greater extent on the efficiency of the flushing. The wear debris present in the spark gap should be removed as quickly as possible. With poor flushing there is a possibility of build-up of the machined particles in the gap resulting in the short-circuiting and lower material removal rates. Problems with improper flushing are: uneven and significant tool wear affecting accuracy and surface finish; reduced removal rates due to unstable machining conditions and arcing around regions with high concentration of debris. It is noted during an experimental study that there is an optimum dielectric flushing rate of about 13 ml/s while machining AISI O1 tool steel, where the crack density and average thickness of the recast layer are at a minimum.

How to Calculate Ambient atmospheric pressure?

Ambient atmospheric pressure calculator uses Atmospheric Pressure = Pressure in Flushing Hole-(Net Force Acting on the Electrode*(2*ln(Radius of the Electrodes/Radius of Flushing Hole)))/(pi*(Radius of the Electrodes^2-Radius of Flushing Hole^2)) to calculate the Atmospheric Pressure, The Ambient atmospheric pressure formula is defined as the pressure of the ambient area where electrode performs EDM. Atmospheric Pressure is denoted by P_atm symbol.

How to calculate Ambient atmospheric pressure using this online calculator? To use this online calculator for Ambient atmospheric pressure, enter Pressure in Flushing Hole (P₁), Net Force Acting on the Electrode (F_net), Radius of the Electrodes (R₀) & Radius of Flushing Hole (R₁) and hit the calculate button. Here is how the Ambient atmospheric pressure calculation can be explained with given input values -> 0.000999 = 1766600-(6000*(2*ln(0.05/0.02)))/(pi*(0.05^2-0.02^2)).

FAQ

What is Ambient atmospheric pressure?

The Ambient atmospheric pressure formula is defined as the pressure of the ambient area where electrode performs EDM and is represented as P_atm = P₁-(F_net*(2*ln(R₀/R₁)))/(pi*(R₀^2-R₁^2)) or Atmospheric Pressure = Pressure in Flushing Hole-(Net Force Acting on the Electrode*(2*ln(Radius of the Electrodes/Radius of Flushing Hole)))/(pi*(Radius of the Electrodes^2-Radius of Flushing Hole^2)). Pressure in Flushing Hole is the pressure in hole during EDM machining, Net force acting on the electrode is the net force acting on the electrode, Radius of the electrodes is defined as the radius of the electrode used for unconventional machining by EDM & Radius of flushing hole is the radius of flushing hole in EDM.

How to calculate Ambient atmospheric pressure?

The Ambient atmospheric pressure formula is defined as the pressure of the ambient area where electrode performs EDM is calculated using Atmospheric Pressure = Pressure in Flushing Hole-(Net Force Acting on the Electrode*(2*ln(Radius of the Electrodes/Radius of Flushing Hole)))/(pi*(Radius of the Electrodes^2-Radius of Flushing Hole^2)). To calculate Ambient atmospheric pressure, you need Pressure in Flushing Hole (P₁), Net Force Acting on the Electrode (F_net), Radius of the Electrodes (R₀) & Radius of Flushing Hole (R₁). With our tool, you need to enter the respective value for Pressure in Flushing Hole, Net Force Acting on the Electrode, Radius of the Electrodes & Radius of Flushing Hole and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search