Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System Calculator

✖Pipe Diameter for Weiris the diameter of the pipe in which the liquid is flowing.ⓘ Pipe Diameter for Weir [d_pipe]			+10% -10%
✖Cost for Distribution System indicates the price associated with the making of the product.ⓘ Cost for Distribution System [C_ds]			+10% -10%
✖The initial investment is the amount required to start a business or a project.ⓘ Initial Investment [I]			+10% -10%
✖Average Head is defined as level of water flowing in pipe at different points.ⓘ Average Head [h_Avghead]			+10% -10%
✖Discharge for Economical Pipe is the discharge calculated from the most Economical Pipe.ⓘ Discharge for Economical Pipe [Q_ec]			+10% -10%
✖Hydroelectric Power is electricity generated by the flow of water through turbines, harnessing the energy of falling or flowing water.ⓘ Hydroelectric Power [P]			+10% -10%
✖The Darcy Friction Factor is a dimensionless parameter used to describe the resistance to fluid flow in pipes or channels.ⓘ Darcy Friction Factor [f]			+10% -10%

✖Allowable Unit Stress is the maximum load or stress allowed per unit area of the column.ⓘ Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System [PA]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Flow Over Notches and Weirs Formula PDF PDF Image

Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System Solution

STEP 0: Pre-Calculation Summary

Formula Used

Allowable Unit Stress = ((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(0.215*(((Discharge for Economical Pipe^3)*Hydroelectric Power*Darcy Friction Factor)))
PA = ((d_pipe^7)*(C_ds*I*h_Avghead))/(0.215*(((Q_ec^3)*P*f)))
This formula uses 8 Variables

Variables Used

Allowable Unit Stress - (Measured in Pascal) - Allowable Unit Stress is the maximum load or stress allowed per unit area of the column.
Pipe Diameter for Weir - (Measured in Meter) - Pipe Diameter for Weiris the diameter of the pipe in which the liquid is flowing.
Cost for Distribution System - Cost for Distribution System indicates the price associated with the making of the product.
Initial Investment - The initial investment is the amount required to start a business or a project.
Average Head - (Measured in Meter) - Average Head is defined as level of water flowing in pipe at different points.
Discharge for Economical Pipe - (Measured in Cubic Meter per Second) - Discharge for Economical Pipe is the discharge calculated from the most Economical Pipe.
Hydroelectric Power - (Measured in Watt) - Hydroelectric Power is electricity generated by the flow of water through turbines, harnessing the energy of falling or flowing water.
Darcy Friction Factor - The Darcy Friction Factor is a dimensionless parameter used to describe the resistance to fluid flow in pipes or channels.

STEP 1: Convert Input(s) to Base Unit

Pipe Diameter for Weir: 1.01 Meter --> 1.01 Meter No Conversion Required
Cost for Distribution System: 1223 --> No Conversion Required
Initial Investment: 1890 --> No Conversion Required
Average Head: 1.51 Meter --> 1.51 Meter No Conversion Required
Discharge for Economical Pipe: 0.16 Cubic Meter per Second --> 0.16 Cubic Meter per Second No Conversion Required
Hydroelectric Power: 170 Watt --> 170 Watt No Conversion Required
Darcy Friction Factor: 0.5 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

PA = ((d_pipe^7)*(C_ds*I*h_Avghead))/(0.215*(((Q_ec^3)*P*f))) --> ((1.01^7)*(1223*1890*1.51))/(0.215*(((0.16^3)*170*0.5)))

Evaluating ... ...

PA = 49991652.3347396

STEP 3: Convert Result to Output's Unit

49991652.3347396 Pascal -->49.9916523347396 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

49.9916523347396 ≈ 49.99165 Newton per Square Millimeter <-- Allowable Unit Stress

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Flow Over Notches and Weirs » Most Economical Pipe » Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Most Economical Pipe Calculators

Discharge for Most Economical Pipe Diameter for Distribution System

LaTeX Go Discharge for Economical Pipe = (((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(((0.215))*((Darcy Friction Factor*Hydroelectric Power*Allowable Unit Stress))))^(1/3)

Darcy Weisbach Friction Factor for Most Economical Pipe Diameter for Distribution System

LaTeX Go Darcy Friction Factor = ((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(0.215*(((Discharge for Economical Pipe^3)*Hydroelectric Power*Allowable Unit Stress)))

Average Power for Most Economical Pipe Diameter for Distribution System

LaTeX Go Hydroelectric Power = ((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(0.215*(((Discharge for Economical Pipe^3)*Darcy Friction Factor*Allowable Unit Stress)))

Most Economical Pipe Diameter for Distribution System of Water

LaTeX Go Pipe Diameter for Weir = 0.215*((Darcy Friction Factor*(Discharge for Economical Pipe^3)*Hydroelectric Power*Allowable Unit Stress)/(Cost for Distribution System*Initial Investment*Average Head))^(1/7)

Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System Formula

LaTeX Go

What is Economical Section of Pipe ?

A most economical section, the discharge slope of bed and resistance co-efficient is maximum, but in case of circular channels, the area of flow cannot be maintained constant, with change of flow in circular channels of any radios, the wetted area and wetted perimeter changes.

How to Calculate Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System?

Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System calculator uses Allowable Unit Stress = ((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(0.215*(((Discharge for Economical Pipe^3)*Hydroelectric Power*Darcy Friction Factor))) to calculate the Allowable Unit Stress, Allowable Unit Stress given Most economical pipe diameter for distribution system is defined as stress in pipe. Allowable Unit Stress is denoted by PA symbol.

How to calculate Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System using this online calculator? To use this online calculator for Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System, enter Pipe Diameter for Weir (d_pipe), Cost for Distribution System (C_ds), Initial Investment (I), Average Head (h_Avghead), Discharge for Economical Pipe (Q_ec), Hydroelectric Power (P) & Darcy Friction Factor (f) and hit the calculate button. Here is how the Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System calculation can be explained with given input values -> 5.3E-5 = ((1.01^7)*(1223*1890*1.51))/(0.215*(((0.16^3)*170*0.5))).

FAQ

What is Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System?

Allowable Unit Stress given Most economical pipe diameter for distribution system is defined as stress in pipe and is represented as PA = ((d_pipe^7)*(C_ds*I*h_Avghead))/(0.215*(((Q_ec^3)*P*f))) or Allowable Unit Stress = ((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(0.215*(((Discharge for Economical Pipe^3)*Hydroelectric Power*Darcy Friction Factor))). Pipe Diameter for Weiris the diameter of the pipe in which the liquid is flowing, Cost for Distribution System indicates the price associated with the making of the product, The initial investment is the amount required to start a business or a project, Average Head is defined as level of water flowing in pipe at different points, Discharge for Economical Pipe is the discharge calculated from the most Economical Pipe, Hydroelectric Power is electricity generated by the flow of water through turbines, harnessing the energy of falling or flowing water & The Darcy Friction Factor is a dimensionless parameter used to describe the resistance to fluid flow in pipes or channels.

How to calculate Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System?

Allowable Unit Stress given Most economical pipe diameter for distribution system is defined as stress in pipe is calculated using Allowable Unit Stress = ((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(0.215*(((Discharge for Economical Pipe^3)*Hydroelectric Power*Darcy Friction Factor))). To calculate Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System, you need Pipe Diameter for Weir (d_pipe), Cost for Distribution System (C_ds), Initial Investment (I), Average Head (h_Avghead), Discharge for Economical Pipe (Q_ec), Hydroelectric Power (P) & Darcy Friction Factor (f). With our tool, you need to enter the respective value for Pipe Diameter for Weir, Cost for Distribution System, Initial Investment, Average Head, Discharge for Economical Pipe, Hydroelectric Power & Darcy Friction Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search