Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld Calculator

✖Load on weld is the instantaneous load applied perpendicular to the specimen cross section.ⓘ Load on weld [W]			+10% -10%
✖The Length of Single Fillet Lap Weld is the distance between two consecutive ends of welds.ⓘ Length of Single Fillet Lap Weld [L_single]			+10% -10%
✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate [t_plate]			+10% -10%

✖Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.ⓘ Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld [σ_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Stress = Load on weld/(0.707*Length of Single Fillet Lap Weld*Thickness of Plate)
σ_t = W/(0.707*L_single*t_plate)
This formula uses 4 Variables

Variables Used

Tensile Stress - (Measured in Pascal) - Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.
Load on weld - (Measured in Newton) - Load on weld is the instantaneous load applied perpendicular to the specimen cross section.
Length of Single Fillet Lap Weld - (Measured in Meter) - The Length of Single Fillet Lap Weld is the distance between two consecutive ends of welds.
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

STEP 1: Convert Input(s) to Base Unit

Load on weld: 9 Kilonewton --> 9000 Newton (Check conversion here)
Length of Single Fillet Lap Weld: 1.5 Millimeter --> 0.0015 Meter (Check conversion here)
Thickness of Plate: 12 Millimeter --> 0.012 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_t = W/(0.707*L_single*t_plate) --> 9000/(0.707*0.0015*0.012)

Evaluating ... ...

σ_t = 707213578.500707

STEP 3: Convert Result to Output's Unit

707213578.500707 Pascal -->707.213578500707 Megapascal (Check conversion here)

FINAL ANSWER

707.213578500707 ≈ 707.2136 Megapascal <-- Tensile Stress

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Mechanical » Analysis of Compound Weld » Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Analysis of Compound Weld Calculators

Length of Single Fillet Lap Weld given Load Carried by Single Fillet Lap Weld

LaTeX Go Length of Single Fillet Lap Weld = Load on weld/(0.707*Tensile Stress*Thickness of Plate)

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld

LaTeX Go Tensile Stress = Load on weld/(0.707*Length of Single Fillet Lap Weld*Thickness of Plate)

Thickness of Plates given Load Carried by Single Fillet Lap Weld

LaTeX Go Thickness of Plate = Load on weld/(0.707*Tensile Stress*Length of Single Fillet Lap Weld)

Load Carried by Single Fillet Lap Weld

LaTeX Go Load on weld = 0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld Formula

LaTeX Go

Tensile Stress = Load on weld/(0.707*Length of Single Fillet Lap Weld*Thickness of Plate)
σ_t = W/(0.707*L_single*t_plate)

What do you mean by maximum shear stress theory?

The maximum shear stress theory states that the failure or yielding of a ductile material will occur when the maximum shear stress of the material equals or exceeds the shear stress value at the yield point in the uniaxial tensile test.

How to Calculate Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld?

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld calculator uses Tensile Stress = Load on weld/(0.707*Length of Single Fillet Lap Weld*Thickness of Plate) to calculate the Tensile Stress, Allowable tensile stress given load carried by single fillet lap weld is defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force. Tensile Stress is denoted by σ_t symbol.

How to calculate Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld using this online calculator? To use this online calculator for Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld, enter Load on weld (W), Length of Single Fillet Lap Weld (L_single) & Thickness of Plate (t_plate) and hit the calculate button. Here is how the Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld calculation can be explained with given input values -> 0.000283 = 9000/(0.707*0.0015*0.012).

FAQ

What is Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld?

Allowable tensile stress given load carried by single fillet lap weld is defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force and is represented as σ_t = W/(0.707*L_single*t_plate) or Tensile Stress = Load on weld/(0.707*Length of Single Fillet Lap Weld*Thickness of Plate). Load on weld is the instantaneous load applied perpendicular to the specimen cross section, The Length of Single Fillet Lap Weld is the distance between two consecutive ends of welds & The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

How to calculate Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld?

Allowable tensile stress given load carried by single fillet lap weld is defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force is calculated using Tensile Stress = Load on weld/(0.707*Length of Single Fillet Lap Weld*Thickness of Plate). To calculate Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld, you need Load on weld (W), Length of Single Fillet Lap Weld (L_single) & Thickness of Plate (t_plate). With our tool, you need to enter the respective value for Load on weld, Length of Single Fillet Lap Weld & Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Stress?

In this formula, Tensile Stress uses Load on weld, Length of Single Fillet Lap Weld & Thickness of Plate. We can use 1 other way(s) to calculate the same, which is/are as follows -

Tensile Stress = (Load on weld-1.414*Shear Stress*Length of Parallel Fillet Weld*Thickness of Plate)/(0.707*Length of Single Fillet Lap Weld*Thickness of Plate)

Home

FREE PDFs

🔍 Search