Allowable Stress in Ductile Material under Tensile Loading Calculator

✖Tensile Yield Strength is the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.ⓘ Tensile Yield Strength [σ_y]			+10% -10%
✖Factor of Safety expresses how much stronger a system is than it needs to be for an intended load.ⓘ Factor of Safety [f_s]			+10% -10%

✖Allowable Stress for Static Load is also known as working load and is the ratio of tensile strength and factor of safety.ⓘ Allowable Stress in Ductile Material under Tensile Loading [σ_al]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Theories of Failure Formulas PDF PDF Image

Allowable Stress in Ductile Material under Tensile Loading Solution

STEP 0: Pre-Calculation Summary

Formula Used

Allowable Stress for Static Load = Tensile Yield Strength/Factor of Safety
σ_al = σ_y/f_s
This formula uses 3 Variables

Variables Used

Allowable Stress for Static Load - (Measured in Pascal) - Allowable Stress for Static Load is also known as working load and is the ratio of tensile strength and factor of safety.
Tensile Yield Strength - (Measured in Pascal) - Tensile Yield Strength is the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.
Factor of Safety - Factor of Safety expresses how much stronger a system is than it needs to be for an intended load.

STEP 1: Convert Input(s) to Base Unit

Tensile Yield Strength: 85 Newton per Square Millimeter --> 85000000 Pascal (Check conversion here)
Factor of Safety: 2 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_al = σ_y/f_s --> 85000000/2

Evaluating ... ...

σ_al = 42500000

STEP 3: Convert Result to Output's Unit

42500000 Pascal -->42.5 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

42.5 Newton per Square Millimeter <-- Allowable Stress for Static Load

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design Against Static Load » Theories of Failure » Maximum Principal Stress Theory » Allowable Stress in Ductile Material under Tensile Loading

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Chilvera Bhanu Teja

Institute of Aeronautical Engineering (IARE), Hyderabad

Chilvera Bhanu Teja has verified this Calculator and 200+ more calculators!

< Maximum Principal Stress Theory Calculators

Allowable Stress in Brittle Material under Compressive Loading

LaTeX Go Allowable Stress for Static Load = Ultimate Compressive Stress/Factor of Safety

Allowable Stress in Ductile Material under Compressive Loading

LaTeX Go Allowable Stress for Static Load = Compressive Yield Strength/Factor of Safety

Allowable Stress in Brittle Material under Tensile Loading

LaTeX Go Allowable Stress for Static Load = Ultimate Tensile Strength/Factor of Safety

Allowable Stress in Ductile Material under Tensile Loading

LaTeX Go Allowable Stress for Static Load = Tensile Yield Strength/Factor of Safety

Allowable Stress in Ductile Material under Tensile Loading Formula

LaTeX Go

Allowable Stress for Static Load = Tensile Yield Strength/Factor of Safety
σ_al = σ_y/f_s

What is factor of safety?

There are always approximations in engineering calculations. Hence, the allowed stress is kept less than failure stress, and the ratio of failure stress to allowed stress is called factor of safety.

How to Calculate Allowable Stress in Ductile Material under Tensile Loading?

Allowable Stress in Ductile Material under Tensile Loading calculator uses Allowable Stress for Static Load = Tensile Yield Strength/Factor of Safety to calculate the Allowable Stress for Static Load, Allowable stress in ductile material under tensile loading formula is defined as the ratio of ultimate compressive stress to the factor of safety. It is the material failure stress (a property of the material) divided by a factor of safety greater than one. Allowable Stress for Static Load is denoted by σ_al symbol.

How to calculate Allowable Stress in Ductile Material under Tensile Loading using this online calculator? To use this online calculator for Allowable Stress in Ductile Material under Tensile Loading, enter Tensile Yield Strength (σ_y) & Factor of Safety (f_s) and hit the calculate button. Here is how the Allowable Stress in Ductile Material under Tensile Loading calculation can be explained with given input values -> 4.3E-5 = 85000000/2.

FAQ

What is Allowable Stress in Ductile Material under Tensile Loading?

Allowable stress in ductile material under tensile loading formula is defined as the ratio of ultimate compressive stress to the factor of safety. It is the material failure stress (a property of the material) divided by a factor of safety greater than one and is represented as σ_al = σ_y/f_s or Allowable Stress for Static Load = Tensile Yield Strength/Factor of Safety. Tensile Yield Strength is the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions & Factor of Safety expresses how much stronger a system is than it needs to be for an intended load.

How to calculate Allowable Stress in Ductile Material under Tensile Loading?

Allowable stress in ductile material under tensile loading formula is defined as the ratio of ultimate compressive stress to the factor of safety. It is the material failure stress (a property of the material) divided by a factor of safety greater than one is calculated using Allowable Stress for Static Load = Tensile Yield Strength/Factor of Safety. To calculate Allowable Stress in Ductile Material under Tensile Loading, you need Tensile Yield Strength (σ_y) & Factor of Safety (f_s). With our tool, you need to enter the respective value for Tensile Yield Strength & Factor of Safety and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Allowable Stress for Static Load?

In this formula, Allowable Stress for Static Load uses Tensile Yield Strength & Factor of Safety. We can use 3 other way(s) to calculate the same, which is/are as follows -

Allowable Stress for Static Load = Ultimate Tensile Strength/Factor of Safety
Allowable Stress for Static Load = Compressive Yield Strength/Factor of Safety
Allowable Stress for Static Load = Ultimate Compressive Stress/Factor of Safety

Home

FREE PDFs

🔍 Search