Allowable Load per Inch of Penetration into Member Receiving Point Calculator

✖Specific gravity of wood oven dry, Specific gravity is the ratio of the density of a substance to the density of a given reference material.ⓘ Specific Gravity of Wood Oven Dry [G]			+10% -10%
✖Diameter of Spike or Nail in mm are pieces of soft iron or steel or other materials of variable lengths and thicknesses, pointed at one end and with a head at the other serving to join pieces.ⓘ Diameter of Spike or Nail [D_spikes]			+10% -10%

✖Total Allowable Load for Nails or Spikes is the capacity or can say the maximum load allowed.ⓘ Allowable Load per Inch of Penetration into Member Receiving Point [P_nails]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Timber Engineering Formula PDF PDF Image

Allowable Load per Inch of Penetration into Member Receiving Point Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Allowable Load for Nails or Spikes = 1380*(Specific Gravity of Wood Oven Dry^(5/2))*Diameter of Spike or Nail
P_nails = 1380*(G^(5/2))*D_spikes
This formula uses 3 Variables

Variables Used

Total Allowable Load for Nails or Spikes - (Measured in Newton) - Total Allowable Load for Nails or Spikes is the capacity or can say the maximum load allowed.
Specific Gravity of Wood Oven Dry - Specific gravity of wood oven dry, Specific gravity is the ratio of the density of a substance to the density of a given reference material.
Diameter of Spike or Nail - (Measured in Meter) - Diameter of Spike or Nail in mm are pieces of soft iron or steel or other materials of variable lengths and thicknesses, pointed at one end and with a head at the other serving to join pieces.

STEP 1: Convert Input(s) to Base Unit

Specific Gravity of Wood Oven Dry: 0.265 --> No Conversion Required
Diameter of Spike or Nail: 50.00001 Millimeter --> 0.05000001 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_nails = 1380*(G^(5/2))*D_spikes --> 1380*(0.265^(5/2))*0.05000001

Evaluating ... ...

P_nails = 2.49438716082263

STEP 3: Convert Result to Output's Unit

2.49438716082263 Newton --> No Conversion Required

FINAL ANSWER

2.49438716082263 ≈ 2.494387 Newton <-- Total Allowable Load for Nails or Spikes

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Timber Engineering » Fasteners for Wood » Nails and Spikes » Allowable Load per Inch of Penetration into Member Receiving Point

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Himanshi Sharma

Bhilai Institute of Technology (BIT), Raipur

Himanshi Sharma has verified this Calculator and 800+ more calculators!

< Nails and Spikes Calculators

Total Allowable Lateral Load for Nail or Spike

LaTeX Go Total Allowable Load for Nails or Spikes = Coefficient Dependent on Group Number of Wood*(Diameter of Spike or Nail)^(3/2)

Diameter of Nail or Spike given Allowable Load per Inch of Penetration

LaTeX Go Diameter of Spike or Nail = Total Allowable Load for Nails or Spikes/(1380*(Specific Gravity of Wood Oven Dry)^(5/2))

Allowable Load per Inch of Penetration into Member Receiving Point

LaTeX Go Total Allowable Load for Nails or Spikes = 1380*(Specific Gravity of Wood Oven Dry^(5/2))*Diameter of Spike or Nail

Allowable Load per Inch of Penetration into Member Receiving Point Formula

LaTeX Go

Total Allowable Load for Nails or Spikes = 1380*(Specific Gravity of Wood Oven Dry^(5/2))*Diameter of Spike or Nail
P_nails = 1380*(G^(5/2))*D_spikes

What is allowable strength?

The Allowable Stress or Allowable Strength is the maximum stress (tensile, compressive or bending) that is allowed to be applied on a structural material.

What are wood screws?

Wood screws are handy for quickly building jigs and clamping forms, joining cabinet and furniture parts, mounting hardware and trim, and much more. Screws form strong connections between parts made from solid wood, plywood and other sheet goods without the need for cut joinery.

How to Calculate Allowable Load per Inch of Penetration into Member Receiving Point?

Allowable Load per Inch of Penetration into Member Receiving Point calculator uses Total Allowable Load for Nails or Spikes = 1380*(Specific Gravity of Wood Oven Dry^(5/2))*Diameter of Spike or Nail to calculate the Total Allowable Load for Nails or Spikes, Allowable Load per Inch of Penetration into Member Receiving Point is defined by the parameters specific gravity of wood, oven dry and diameter of nail or spike. Total Allowable Load for Nails or Spikes is denoted by P_nails symbol.

How to calculate Allowable Load per Inch of Penetration into Member Receiving Point using this online calculator? To use this online calculator for Allowable Load per Inch of Penetration into Member Receiving Point, enter Specific Gravity of Wood Oven Dry (G) & Diameter of Spike or Nail (D_spikes) and hit the calculate button. Here is how the Allowable Load per Inch of Penetration into Member Receiving Point calculation can be explained with given input values -> 2.494387 = 1380*(0.265^(5/2))*0.05000001.

FAQ

What is Allowable Load per Inch of Penetration into Member Receiving Point?

Allowable Load per Inch of Penetration into Member Receiving Point is defined by the parameters specific gravity of wood, oven dry and diameter of nail or spike and is represented as P_nails = 1380*(G^(5/2))*D_spikes or Total Allowable Load for Nails or Spikes = 1380*(Specific Gravity of Wood Oven Dry^(5/2))*Diameter of Spike or Nail. Specific gravity of wood oven dry, Specific gravity is the ratio of the density of a substance to the density of a given reference material & Diameter of Spike or Nail in mm are pieces of soft iron or steel or other materials of variable lengths and thicknesses, pointed at one end and with a head at the other serving to join pieces.

How to calculate Allowable Load per Inch of Penetration into Member Receiving Point?

Allowable Load per Inch of Penetration into Member Receiving Point is defined by the parameters specific gravity of wood, oven dry and diameter of nail or spike is calculated using Total Allowable Load for Nails or Spikes = 1380*(Specific Gravity of Wood Oven Dry^(5/2))*Diameter of Spike or Nail. To calculate Allowable Load per Inch of Penetration into Member Receiving Point, you need Specific Gravity of Wood Oven Dry (G) & Diameter of Spike or Nail (D_spikes). With our tool, you need to enter the respective value for Specific Gravity of Wood Oven Dry & Diameter of Spike or Nail and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Total Allowable Load for Nails or Spikes?

In this formula, Total Allowable Load for Nails or Spikes uses Specific Gravity of Wood Oven Dry & Diameter of Spike or Nail. We can use 1 other way(s) to calculate the same, which is/are as follows -

Total Allowable Load for Nails or Spikes = Coefficient Dependent on Group Number of Wood*(Diameter of Spike or Nail)^(3/2)

Home

FREE PDFs

🔍 Search