Allowable Load in Parallel Fillet Weld per Unit Length Calculator

✖Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress.ⓘ Shear Stress in Parallel Fillet Weld [𝜏]			+10% -10%
✖The Leg of Weld is the distance from the joint root to the toe of the weld.ⓘ Leg of Weld [h_l]			+10% -10%

✖Allowable Load per unit Length of Weld is defined as the maximum amount of load or the force that a weld can carry per unit length of the weld.ⓘ Allowable Load in Parallel Fillet Weld per Unit Length [P_a]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Parallel Fillet Welds Formulas PDF PDF Image

Allowable Load in Parallel Fillet Weld per Unit Length Solution

STEP 0: Pre-Calculation Summary

Formula Used

Allowable Load Per Unit Length of Weld = 0.707*Shear Stress in Parallel Fillet Weld*Leg of Weld
P_a = 0.707*𝜏*h_l
This formula uses 3 Variables

Variables Used

Allowable Load Per Unit Length of Weld - (Measured in Newton per Meter) - Allowable Load per unit Length of Weld is defined as the maximum amount of load or the force that a weld can carry per unit length of the weld.
Shear Stress in Parallel Fillet Weld - (Measured in Pascal) - Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress.
Leg of Weld - (Measured in Meter) - The Leg of Weld is the distance from the joint root to the toe of the weld.

STEP 1: Convert Input(s) to Base Unit

Shear Stress in Parallel Fillet Weld: 38 Newton per Square Millimeter --> 38000000 Pascal (Check conversion here)
Leg of Weld: 21.2 Millimeter --> 0.0212 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_a = 0.707*𝜏*h_l --> 0.707*38000000*0.0212

Evaluating ... ...

P_a = 569559.2

STEP 3: Convert Result to Output's Unit

569559.2 Newton per Meter -->569.5592 Newton per Millimeter (Check conversion here)

FINAL ANSWER

569.5592 Newton per Millimeter <-- Allowable Load Per Unit Length of Weld

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Mechanical » Parallel Fillet Welds » Allowable Load in Parallel Fillet Weld per Unit Length

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Parallel Fillet Welds Calculators

Shear Stress in Double Parallel Fillet Weld

LaTeX Go Shear Stress in Double Parallel Fillet Weld = Load on Double Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Shear Stress in Parallel Fillet Weld

LaTeX Go Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Leg of Parallel Fillet Weld given Throat of Weld

LaTeX Go Leg of Weld = Throat Thickness of Weld/cos(pi/4)

Throat of Parallel Fillet Weld

LaTeX Go Throat Thickness of Weld = Leg of Weld*cos(pi/4)

Allowable Load in Parallel Fillet Weld per Unit Length Formula

LaTeX Go

Allowable Load Per Unit Length of Weld = 0.707*Shear Stress in Parallel Fillet Weld*Leg of Weld
P_a = 0.707*𝜏*h_l

what is effective length of weld?

The effective length of a fillet weld is taken equal to overall length minus twice the weld size. The deduction is made to allow for craters to be formed at the ends of welded length.

How to Calculate Allowable Load in Parallel Fillet Weld per Unit Length?

Allowable Load in Parallel Fillet Weld per Unit Length calculator uses Allowable Load Per Unit Length of Weld = 0.707*Shear Stress in Parallel Fillet Weld*Leg of Weld to calculate the Allowable Load Per Unit Length of Weld, Allowable Load in Parallel Fillet Weld per Unit Length is defined as the maximum amount of load that a parallel fillet weld can carry per mm length of the weld. Allowable Load Per Unit Length of Weld is denoted by P_a symbol.

How to calculate Allowable Load in Parallel Fillet Weld per Unit Length using this online calculator? To use this online calculator for Allowable Load in Parallel Fillet Weld per Unit Length, enter Shear Stress in Parallel Fillet Weld (𝜏) & Leg of Weld (h_l) and hit the calculate button. Here is how the Allowable Load in Parallel Fillet Weld per Unit Length calculation can be explained with given input values -> 0.569559 = 0.707*38000000*0.0212.

FAQ

What is Allowable Load in Parallel Fillet Weld per Unit Length?

Allowable Load in Parallel Fillet Weld per Unit Length is defined as the maximum amount of load that a parallel fillet weld can carry per mm length of the weld and is represented as P_a = 0.707*𝜏*h_l or Allowable Load Per Unit Length of Weld = 0.707*Shear Stress in Parallel Fillet Weld*Leg of Weld. Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress & The Leg of Weld is the distance from the joint root to the toe of the weld.

How to calculate Allowable Load in Parallel Fillet Weld per Unit Length?

Allowable Load in Parallel Fillet Weld per Unit Length is defined as the maximum amount of load that a parallel fillet weld can carry per mm length of the weld is calculated using Allowable Load Per Unit Length of Weld = 0.707*Shear Stress in Parallel Fillet Weld*Leg of Weld. To calculate Allowable Load in Parallel Fillet Weld per Unit Length, you need Shear Stress in Parallel Fillet Weld (𝜏) & Leg of Weld (h_l). With our tool, you need to enter the respective value for Shear Stress in Parallel Fillet Weld & Leg of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search