Allowable Horizontal Shear for Welded Studs for 100,000 Cycles Solution

STEP 0: Pre-Calculation Summary
Formula Used
Allowable Range of Horizontal Shear = 13.0*(Stud Diameter^2)
Zr = 13.0*(d^2)
This formula uses 2 Variables
Variables Used
Allowable Range of Horizontal Shear - (Measured in Kilonewton) - The Allowable Range of Horizontal Shear is a force applied along the surface, in opposition to an offset force acting in the opposite direction.
Stud Diameter - (Measured in Millimeter) - Stud Diameter is the diameter of the Stud used.
STEP 1: Convert Input(s) to Base Unit
Stud Diameter: 8 Millimeter --> 8 Millimeter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Zr = 13.0*(d^2) --> 13.0*(8^2)
Evaluating ... ...
Zr = 832
STEP 3: Convert Result to Output's Unit
832000 Newton -->832 Kilonewton (Check conversion ​here)
FINAL ANSWER
832 Kilonewton <-- Allowable Range of Horizontal Shear
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has created this Calculator and 1300+ more calculators!
Verifier Image
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

Shear Range Calculators

Moment of Inertia of Transformed Section given Horizontal Shear Range
​ LaTeX ​ Go Moment of Inertia of Transformed Section = (Static Moment*Shear Range)/Horizontal Shear Range
Shear Range due to Live and Impact Load given Horizontal Shear Range
​ LaTeX ​ Go Shear Range = (Horizontal Shear Range*Moment of Inertia of Transformed Section)/Static Moment
Static Moment of Transformed Section given Horizontal Shear Range
​ LaTeX ​ Go Static Moment = (Horizontal Shear Range*Moment of Inertia of Transformed Section)/Shear Range
Horizontal Shear Range at Juncture of Slab and Beam
​ LaTeX ​ Go Horizontal Shear Range = (Shear Range*Static Moment)/Moment of Inertia of Transformed Section

Allowable Horizontal Shear for Welded Studs for 100,000 Cycles Formula

​LaTeX ​Go
Allowable Range of Horizontal Shear = 13.0*(Stud Diameter^2)
Zr = 13.0*(d^2)

What is Allowable Shear Stress for Welded Studs?

Stress developed when stud welding is carried out by which a metal stud is joined to a metal workpiece by heating both parts with an arc. A key factor that differentiates stud welding from other fastening processes is that the fastener is attached to the workpiece without marring the other side is called as Allowable Shear Stress for Welded Studs.

How to Calculate Allowable Horizontal Shear for Welded Studs for 100,000 Cycles?

Allowable Horizontal Shear for Welded Studs for 100,000 Cycles calculator uses Allowable Range of Horizontal Shear = 13.0*(Stud Diameter^2) to calculate the Allowable Range of Horizontal Shear, The Allowable Horizontal Shear for Welded Studs for 100,000 Cycles formula is defined as permissible stress for fillet welds where the height by diameter ratio is more than or equal to 4. Allowable Range of Horizontal Shear is denoted by Zr symbol.

How to calculate Allowable Horizontal Shear for Welded Studs for 100,000 Cycles using this online calculator? To use this online calculator for Allowable Horizontal Shear for Welded Studs for 100,000 Cycles, enter Stud Diameter (d) and hit the calculate button. Here is how the Allowable Horizontal Shear for Welded Studs for 100,000 Cycles calculation can be explained with given input values -> 0.832 = 13.0*(0.008^2).

FAQ

What is Allowable Horizontal Shear for Welded Studs for 100,000 Cycles?
The Allowable Horizontal Shear for Welded Studs for 100,000 Cycles formula is defined as permissible stress for fillet welds where the height by diameter ratio is more than or equal to 4 and is represented as Zr = 13.0*(d^2) or Allowable Range of Horizontal Shear = 13.0*(Stud Diameter^2). Stud Diameter is the diameter of the Stud used.
How to calculate Allowable Horizontal Shear for Welded Studs for 100,000 Cycles?
The Allowable Horizontal Shear for Welded Studs for 100,000 Cycles formula is defined as permissible stress for fillet welds where the height by diameter ratio is more than or equal to 4 is calculated using Allowable Range of Horizontal Shear = 13.0*(Stud Diameter^2). To calculate Allowable Horizontal Shear for Welded Studs for 100,000 Cycles, you need Stud Diameter (d). With our tool, you need to enter the respective value for Stud Diameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Allowable Range of Horizontal Shear?
In this formula, Allowable Range of Horizontal Shear uses Stud Diameter. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Allowable Range of Horizontal Shear = 10.6*(Stud Diameter^2)
  • Allowable Range of Horizontal Shear = 7.85*(Stud Diameter^2)
  • Allowable Range of Horizontal Shear = 5.5*(Stud Diameter^2)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!