Allowable crushing stress given strength of joint per pitch length (double rivet) Calculator

✖Strength of joint is the strength of riveted joint per pitch length.ⓘ Strength of Joint [S]			+10% -10%
✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Rivet Diameter [D_rivet]			+10% -10%
✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate [t_plate]			+10% -10%

✖Crushing stress is a special type of localized compressive stress which occurs at the surface of contact of two members that are relatively at rest.ⓘ Allowable crushing stress given strength of joint per pitch length (double rivet) [σ_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Allowable crushing stress given strength of joint per pitch length (double rivet) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Crushing Stress = Strength of Joint/(2*Rivet Diameter*Thickness of Plate)
σ_c = S/(2*D_rivet*t_plate)
This formula uses 4 Variables

Variables Used

Crushing Stress - (Measured in Pascal) - Crushing stress is a special type of localized compressive stress which occurs at the surface of contact of two members that are relatively at rest.
Strength of Joint - (Measured in Newton) - Strength of joint is the strength of riveted joint per pitch length.
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

STEP 1: Convert Input(s) to Base Unit

Strength of Joint: 8.6 Kilonewton --> 8600 Newton (Check conversion here)
Rivet Diameter: 18 Millimeter --> 0.018 Meter (Check conversion here)
Thickness of Plate: 12 Millimeter --> 0.012 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_c = S/(2*D_rivet*t_plate) --> 8600/(2*0.018*0.012)

Evaluating ... ...

σ_c = 19907407.4074074

STEP 3: Convert Result to Output's Unit

19907407.4074074 Pascal -->19.9074074074074 Megapascal (Check conversion here)

FINAL ANSWER

19.9074074074074 ≈ 19.90741 Megapascal <-- Crushing Stress

(Calculation completed in 00.007 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Failure of A Riveted Joint » Mechanical » Failure Due to Crushing of Rivet or Plate » Allowable crushing stress given strength of joint per pitch length (double rivet)

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Failure Due to Crushing of Rivet or Plate Calculators

Safe load which rivet can withstand against crushing

LaTeX Go Safe Load Joint = Crushing Stress*Rivet Diameter*Thickness of Plate

Allowable crushing stress given safe load which rivet can withstand for given projected area

LaTeX Go Crushing Stress = Safe Load Joint/(Projected Area)

Projected area given safe load which rivet can withstand against crushing

LaTeX Go Projected Area = Safe Load Joint/(Crushing Stress)

Safe load which rivet can withstand against crushing given projected area

LaTeX Go Safe Load Joint = Crushing Stress*Projected Area

Allowable crushing stress given strength of joint per pitch length (double rivet) Formula

LaTeX Go

Crushing Stress = Strength of Joint/(2*Rivet Diameter*Thickness of Plate)
σ_c = S/(2*D_rivet*t_plate)

What is tear and tensile strength?

Tear strength is the measure of how much tensile stress the material can withstand in a specific case, i.e. when a tear has been introduced in the material, whereas a normal tensile stress test is done for a non-defective piece of material.

How to Calculate Allowable crushing stress given strength of joint per pitch length (double rivet)?

Allowable crushing stress given strength of joint per pitch length (double rivet) calculator uses Crushing Stress = Strength of Joint/(2*Rivet Diameter*Thickness of Plate) to calculate the Crushing Stress, The Allowable crushing stress given strength of joint per pitch length (double rivet) formula is defined as a special type of localized compressive stress which occurs at the surface of contact of two members that are relatively at rest. Crushing Stress is denoted by σ_c symbol.

How to calculate Allowable crushing stress given strength of joint per pitch length (double rivet) using this online calculator? To use this online calculator for Allowable crushing stress given strength of joint per pitch length (double rivet), enter Strength of Joint (S), Rivet Diameter (D_rivet) & Thickness of Plate (t_plate) and hit the calculate button. Here is how the Allowable crushing stress given strength of joint per pitch length (double rivet) calculation can be explained with given input values -> 2E-5 = 8600/(2*0.018*0.012).

FAQ

What is Allowable crushing stress given strength of joint per pitch length (double rivet)?

The Allowable crushing stress given strength of joint per pitch length (double rivet) formula is defined as a special type of localized compressive stress which occurs at the surface of contact of two members that are relatively at rest and is represented as σ_c = S/(2*D_rivet*t_plate) or Crushing Stress = Strength of Joint/(2*Rivet Diameter*Thickness of Plate). Strength of joint is the strength of riveted joint per pitch length, Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long & The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

How to calculate Allowable crushing stress given strength of joint per pitch length (double rivet)?

The Allowable crushing stress given strength of joint per pitch length (double rivet) formula is defined as a special type of localized compressive stress which occurs at the surface of contact of two members that are relatively at rest is calculated using Crushing Stress = Strength of Joint/(2*Rivet Diameter*Thickness of Plate). To calculate Allowable crushing stress given strength of joint per pitch length (double rivet), you need Strength of Joint (S), Rivet Diameter (D_rivet) & Thickness of Plate (t_plate). With our tool, you need to enter the respective value for Strength of Joint, Rivet Diameter & Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Crushing Stress?

In this formula, Crushing Stress uses Strength of Joint, Rivet Diameter & Thickness of Plate. We can use 3 other way(s) to calculate the same, which is/are as follows -

Crushing Stress = Safe Load Joint/(Projected Area)
Crushing Stress = Safe Load Joint/(Rivet Diameter*Thickness of Plate)
Crushing Stress = Strength of Joint/(1*Rivet Diameter*Thickness of Plate)

Home

FREE PDFs

🔍 Search