Allowable Bearing Stress for High Strength Bolts Calculator

✖The tensile strength of connected part is the maximum stress that a material can bear before breaking when it is allowed to be stretched or pulled.ⓘ Tensile Strength of connected part [F_u]

+10%

-10%

✖The allowable bearing stress is the maximum bearing stress that can be applied to the structure such that it is safe against instability due to shear failure.ⓘ Allowable Bearing Stress for High Strength Bolts [F_p]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Load, Stress and Fasteners Formulas PDF PDF Image

Allowable Bearing Stress for High Strength Bolts Solution

STEP 0: Pre-Calculation Summary

Formula Used

Allowable Bearing Stress = 1.35*Tensile Strength of connected part
F_p = 1.35*F_u
This formula uses 2 Variables

Variables Used

Allowable Bearing Stress - (Measured in Pascal) - The allowable bearing stress is the maximum bearing stress that can be applied to the structure such that it is safe against instability due to shear failure.
Tensile Strength of connected part - (Measured in Pascal) - The tensile strength of connected part is the maximum stress that a material can bear before breaking when it is allowed to be stretched or pulled.

STEP 1: Convert Input(s) to Base Unit

Tensile Strength of connected part: 102 Megapascal --> 102000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_p = 1.35*F_u --> 1.35*102000000

Evaluating ... ...

F_p = 137700000

STEP 3: Convert Result to Output's Unit

137700000 Pascal -->137.7 Megapascal (Check conversion here)

FINAL ANSWER

137.7 Megapascal <-- Allowable Bearing Stress

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Bridge and Suspension Cable » Load, Stress and Fasteners » Bearing on Milled Surfaces and Bridge Fasteners » Allowable Bearing Stress for High Strength Bolts

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Mridul Sharma

Indian Institute of Information Technology (IIIT), Bhopal

Mridul Sharma has verified this Calculator and 1700+ more calculators!

< Bearing on Milled Surfaces and Bridge Fasteners Calculators

Allowable Stress for Expansion Rollers and Rockers where Diameter is from 635 mm to 3175 mm

LaTeX Go Allowable Stress = ((Yield Strength of Steel-13)/20)*3*sqrt(Diameter of Roller or Rocker)

Diameter of Roller or Rocker for d from 635 to 3125mm

LaTeX Go Diameter of Roller or Rocker = (Allowable Stress/(((Yield Strength of Steel-13)/20)*3))^2

Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm

LaTeX Go Allowable Stress = ((Yield Strength of Steel-13)/20)*0.6*Diameter of Roller or Rocker

Diameter of Roller or Rocker for d up to 635 mm

LaTeX Go Diameter of Roller or Rocker = Allowable Stress/(((Yield Strength of Steel)/20)*0.6)

Allowable Bearing Stress for High Strength Bolts Formula

LaTeX Go

Allowable Bearing Stress = 1.35*Tensile Strength of connected part
F_p = 1.35*F_u

What is Allowable Bearing Stress?

Allowable bearing stress is a value based on an arbitrary amount of deformation of a body subjected to a bearing pressure. The bearing stress criteria for aluminum alloys, if applied to heat-treated steel, would permit allowable stresses as much as 50 per cent greater than those used at present for steel.

What is Tensile Strength of Bolts?

Tensile Strength of bolts is the maximum load in tension (pulling apart) which a material can withstand before breaking or fracturing, whereas yield Strength is the maximum load at which a material exhibits a specific permanent deformation.

How to Calculate Allowable Bearing Stress for High Strength Bolts?

Allowable Bearing Stress for High Strength Bolts calculator uses Allowable Bearing Stress = 1.35*Tensile Strength of connected part to calculate the Allowable Bearing Stress, The Allowable Bearing Stress for High Strength Bolts formula is defined as the working tensile strength of a connected member. Allowable Bearing Stress is denoted by F_p symbol.

How to calculate Allowable Bearing Stress for High Strength Bolts using this online calculator? To use this online calculator for Allowable Bearing Stress for High Strength Bolts, enter Tensile Strength of connected part (F_u) and hit the calculate button. Here is how the Allowable Bearing Stress for High Strength Bolts calculation can be explained with given input values -> 0.000138 = 1.35*102000000.

FAQ

What is Allowable Bearing Stress for High Strength Bolts?

The Allowable Bearing Stress for High Strength Bolts formula is defined as the working tensile strength of a connected member and is represented as F_p = 1.35*F_u or Allowable Bearing Stress = 1.35*Tensile Strength of connected part. The tensile strength of connected part is the maximum stress that a material can bear before breaking when it is allowed to be stretched or pulled.

How to calculate Allowable Bearing Stress for High Strength Bolts?

The Allowable Bearing Stress for High Strength Bolts formula is defined as the working tensile strength of a connected member is calculated using Allowable Bearing Stress = 1.35*Tensile Strength of connected part. To calculate Allowable Bearing Stress for High Strength Bolts, you need Tensile Strength of connected part (F_u). With our tool, you need to enter the respective value for Tensile Strength of connected part and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Allowable Bearing Stress?

In this formula, Allowable Bearing Stress uses Tensile Strength of connected part. We can use 1 other way(s) to calculate the same, which is/are as follows -

Allowable Bearing Stress = 0.80*Tensile Strength of connected part

Home

FREE PDFs

🔍 Search