Allowable Bearing Pressure Calculator

✖Edge Load per unit Width is the force acting on the edges of an object having a unit width.ⓘ Edge Load per Unit Width [P]			+10% -10%
✖Distance between Rivets is the space between the two rivets present in a joint.ⓘ Distance between Rivets [b]			+10% -10%
✖Plate Thickness is the distance through the bearing plate.ⓘ Plate Thickness [p_t]			+10% -10%
✖Diameter of Rivet is somewhat equal to diameter of the hole in which rivetting is to be done. It is the diameter of the shank length of a rivet.ⓘ Diameter of Rivet [D_rivet]			+10% -10%

✖Bearing Stress is described as the contact pressure between the separate bodies.ⓘ Allowable Bearing Pressure [f_br]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Structural Design Formulas PDF PDF Image

Allowable Bearing Pressure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bearing Stress = (Edge Load per Unit Width*Distance between Rivets)/(Plate Thickness*Diameter of Rivet)
f_br = (P*b)/(p_t*D_rivet)
This formula uses 5 Variables

Variables Used

Bearing Stress - (Measured in Pascal) - Bearing Stress is described as the contact pressure between the separate bodies.
Edge Load per Unit Width - (Measured in Newton per Meter) - Edge Load per unit Width is the force acting on the edges of an object having a unit width.
Distance between Rivets - (Measured in Meter) - Distance between Rivets is the space between the two rivets present in a joint.
Plate Thickness - (Measured in Meter) - Plate Thickness is the distance through the bearing plate.
Diameter of Rivet - (Measured in Meter) - Diameter of Rivet is somewhat equal to diameter of the hole in which rivetting is to be done. It is the diameter of the shank length of a rivet.

STEP 1: Convert Input(s) to Base Unit

Edge Load per Unit Width: 37.7 Newton per Millimeter --> 37700 Newton per Meter (Check conversion here)
Distance between Rivets: 1285 Millimeter --> 1.285 Meter (Check conversion here)
Plate Thickness: 94 Millimeter --> 0.094 Meter (Check conversion here)
Diameter of Rivet: 24 Millimeter --> 0.024 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f_br = (P*b)/(p_t*D_rivet) --> (37700*1.285)/(0.094*0.024)

Evaluating ... ...

f_br = 21473625.8865248

STEP 3: Convert Result to Output's Unit

21473625.8865248 Pascal -->21.4736258865248 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

21.4736258865248 ≈ 21.47363 Newton per Square Millimeter <-- Bearing Stress

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Aircraft Mechanics » Aircraft Design » Conceptual Design » Aerospace » Structural Design » Allowable Bearing Pressure

Credits

Created by Shreyash

Rajiv Gandhi Institute of Technology (RGIT), Mumbai

Shreyash has created this Calculator and 10+ more calculators!

Verified by Kartikay Pandit

National Institute Of Technology (NIT), Hamirpur

Kartikay Pandit has verified this Calculator and 400+ more calculators!

< Structural Design Calculators

Maximum Blade Efficiency

LaTeX Go Maximum Blade Efficiency = (2*Blade Lift Force/Blade Drag Force-1)/(2*Blade Lift Force/Blade Drag Force+1)

Shear Load per width

LaTeX Go Edge Load per Unit Width = (pi*(Diameter^2)*Maximum Shear Stress)/(4*Distance between Rivets)

Disk Loading

LaTeX Go Load = Aircraft Weight/((pi*Diameter of Rotor^2)/4)

Average Blade Lift Coefficient

LaTeX Go Blade Lift Coefficient = 6*Thrust Coefficient/Rotor Solidity

Allowable Bearing Pressure Formula

LaTeX Go

Bearing Stress = (Edge Load per Unit Width*Distance between Rivets)/(Plate Thickness*Diameter of Rivet)
f_br = (P*b)/(p_t*D_rivet)

Factors affecting bearing pressure

The value of bearing pressure will change when either there is a change in the edge loads or the dimensions of the rivet or the plate.

How to Calculate Allowable Bearing Pressure?

Allowable Bearing Pressure calculator uses Bearing Stress = (Edge Load per Unit Width*Distance between Rivets)/(Plate Thickness*Diameter of Rivet) to calculate the Bearing Stress, Allowable Bearing Pressure refers to the maximum pressure that a bearing or contact surface can sustain without experiencing excessive wear, deformation, or failure, it is a critical parameter in engineering design, particularly in applications where loads are transmitted through contact surfaces, such as in bearings, joints, or structural connections. Bearing Stress is denoted by f_br symbol.

How to calculate Allowable Bearing Pressure using this online calculator? To use this online calculator for Allowable Bearing Pressure, enter Edge Load per Unit Width (P), Distance between Rivets (b), Plate Thickness (p_t) & Diameter of Rivet (D_rivet) and hit the calculate button. Here is how the Allowable Bearing Pressure calculation can be explained with given input values -> 2.1E-5 = (37700*1.285)/(0.094*0.024).

FAQ

What is Allowable Bearing Pressure?

Allowable Bearing Pressure refers to the maximum pressure that a bearing or contact surface can sustain without experiencing excessive wear, deformation, or failure, it is a critical parameter in engineering design, particularly in applications where loads are transmitted through contact surfaces, such as in bearings, joints, or structural connections and is represented as f_br = (P*b)/(p_t*D_rivet) or Bearing Stress = (Edge Load per Unit Width*Distance between Rivets)/(Plate Thickness*Diameter of Rivet). Edge Load per unit Width is the force acting on the edges of an object having a unit width, Distance between Rivets is the space between the two rivets present in a joint, Plate Thickness is the distance through the bearing plate & Diameter of Rivet is somewhat equal to diameter of the hole in which rivetting is to be done. It is the diameter of the shank length of a rivet.

How to calculate Allowable Bearing Pressure?

Allowable Bearing Pressure refers to the maximum pressure that a bearing or contact surface can sustain without experiencing excessive wear, deformation, or failure, it is a critical parameter in engineering design, particularly in applications where loads are transmitted through contact surfaces, such as in bearings, joints, or structural connections is calculated using Bearing Stress = (Edge Load per Unit Width*Distance between Rivets)/(Plate Thickness*Diameter of Rivet). To calculate Allowable Bearing Pressure, you need Edge Load per Unit Width (P), Distance between Rivets (b), Plate Thickness (p_t) & Diameter of Rivet (D_rivet). With our tool, you need to enter the respective value for Edge Load per Unit Width, Distance between Rivets, Plate Thickness & Diameter of Rivet and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search