Admittance using D Parameter in Nominal T Method Calculator

✖A Parameter in T is a generalized line constant in a two port transmission line.ⓘ A Parameter in T [A_t]			+10% -10%
✖Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.ⓘ Impedance in T [Z_t]			+10% -10%

✖Admittance in T is the mathematical inverse of the impedance in a medium transmission line.ⓘ Admittance using D Parameter in Nominal T Method [Y_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Nominal T Method in Medium Line Formulas PDF PDF Image

Admittance using D Parameter in Nominal T Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Admittance in T = 2*(A Parameter in T-1)/Impedance in T
Y_t = 2*(A_t-1)/Z_t
This formula uses 3 Variables

Variables Used

Admittance in T - (Measured in Siemens) - Admittance in T is the mathematical inverse of the impedance in a medium transmission line.
A Parameter in T - A Parameter in T is a generalized line constant in a two port transmission line.
Impedance in T - (Measured in Ohm) - Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.

STEP 1: Convert Input(s) to Base Unit

A Parameter in T: 1.1 --> No Conversion Required
Impedance in T: 9.07 Ohm --> 9.07 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Y_t = 2*(A_t-1)/Z_t --> 2*(1.1-1)/9.07

Evaluating ... ...

Y_t = 0.0220507166482911

STEP 3: Convert Result to Output's Unit

0.0220507166482911 Siemens --> No Conversion Required

FINAL ANSWER

0.0220507166482911 ≈ 0.022051 Siemens <-- Admittance in T

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Medium Line » Nominal T Method in Medium Line » Admittance using D Parameter in Nominal T Method

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Nominal T Method in Medium Line Calculators

Receiving End Angle using Sending End Power in Nominal T Method

LaTeX Go Receiving End Phase Angle in T = acos((Sending End Power in T-Power Loss in T)/(Receiving End Voltage in T*Receiving End Current in T*3))

Sending End Current using Losses in Nominal T Method

LaTeX Go Sending End Current in T = sqrt((Power Loss in T/(3/2)*Resistance in T)-(Receiving End Current in T^2))

Capacitive Voltage in Nominal T Method

LaTeX Go Capacitive Voltage in T = Receiving End Voltage in T+(Receiving End Current in T*Impedance in T/2)

Losses in Nominal T Method

LaTeX Go Power Loss in T = 3*(Resistance in T/2)*(Receiving End Current in T^2+Sending End Current in T^2)

Admittance using D Parameter in Nominal T Method Formula

LaTeX Go

Admittance in T = 2*(A Parameter in T-1)/Impedance in T
Y_t = 2*(A_t-1)/Z_t

What is nominal T method?

In the Nominal T model of the Transmission line, the whole shunt capacitance of the line is assumed to be lumped at the middle of the line. The half of the line resistance and reactance is assumed at either side of the shunt capacitance. Due to such modeling of line, the capacitive charging current is flowing through half of the transmission line.

How to Calculate Admittance using D Parameter in Nominal T Method?

Admittance using D Parameter in Nominal T Method calculator uses Admittance in T = 2*(A Parameter in T-1)/Impedance in T to calculate the Admittance in T, The Admittance using D Parameter in Nominal T method formula is defined as the mathematical inverse of the impedance. Admittance in T is denoted by Y_t symbol.

How to calculate Admittance using D Parameter in Nominal T Method using this online calculator? To use this online calculator for Admittance using D Parameter in Nominal T Method, enter A Parameter in T (A_t) & Impedance in T (Z_t) and hit the calculate button. Here is how the Admittance using D Parameter in Nominal T Method calculation can be explained with given input values -> 0.022051 = 2*(1.1-1)/9.07.

FAQ

What is Admittance using D Parameter in Nominal T Method?

The Admittance using D Parameter in Nominal T method formula is defined as the mathematical inverse of the impedance and is represented as Y_t = 2*(A_t-1)/Z_t or Admittance in T = 2*(A Parameter in T-1)/Impedance in T. A Parameter in T is a generalized line constant in a two port transmission line & Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.

How to calculate Admittance using D Parameter in Nominal T Method?

The Admittance using D Parameter in Nominal T method formula is defined as the mathematical inverse of the impedance is calculated using Admittance in T = 2*(A Parameter in T-1)/Impedance in T. To calculate Admittance using D Parameter in Nominal T Method, you need A Parameter in T (A_t) & Impedance in T (Z_t). With our tool, you need to enter the respective value for A Parameter in T & Impedance in T and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Admittance in T?

In this formula, Admittance in T uses A Parameter in T & Impedance in T. We can use 1 other way(s) to calculate the same, which is/are as follows -

Admittance in T = 2*(A Parameter in T-1)/Impedance in T

Home

FREE PDFs

🔍 Search