Admittance using A Parameter in End Condenser Method Calculator

✖A Parameter in ECM is a generalized line constant in a two port transmission line.ⓘ A Parameter in ECM [A_ecm]			+10% -10%
✖Impedance in ECM is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.ⓘ Impedance in ECM [Z_ecm]			+10% -10%

✖Admittance in ECM is the mathematical inverse of the impedance in a medium transmission line.ⓘ Admittance using A Parameter in End Condenser Method [Y_ecm]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download End Condenser Method in Medium Line Formulas PDF PDF Image

Admittance using A Parameter in End Condenser Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Admittance in ECM = (2*(A Parameter in ECM-1))/Impedance in ECM
Y_ecm = (2*(A_ecm-1))/Z_ecm
This formula uses 3 Variables

Variables Used

Admittance in ECM - (Measured in Siemens) - Admittance in ECM is the mathematical inverse of the impedance in a medium transmission line.
A Parameter in ECM - A Parameter in ECM is a generalized line constant in a two port transmission line.
Impedance in ECM - (Measured in Ohm) - Impedance in ECM is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.

STEP 1: Convert Input(s) to Base Unit

A Parameter in ECM: 1.091 --> No Conversion Required
Impedance in ECM: 9 Ohm --> 9 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Y_ecm = (2*(A_ecm-1))/Z_ecm --> (2*(1.091-1))/9

Evaluating ... ...

Y_ecm = 0.0202222222222222

STEP 3: Convert Result to Output's Unit

0.0202222222222222 Siemens --> No Conversion Required

FINAL ANSWER

0.0202222222222222 ≈ 0.020222 Siemens <-- Admittance in ECM

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Medium Line » End Condenser Method in Medium Line » Admittance using A Parameter in End Condenser Method

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< End Condenser Method in Medium Line Calculators

Sending End Voltage in End Condenser Method

LaTeX Go Sending End Voltage in ECM = Receiving End Voltage in ECM+(Sending End Current in ECM*Impedance in ECM)

Receiving End Current in End Condenser Method

LaTeX Go Receiving End Current in ECM = Sending End Current in ECM-Capacitive Current in ECM

Sending End Current in End Condenser Method

LaTeX Go Sending End Current in ECM = Receiving End Current in ECM+Capacitive Current in ECM

Capacitive Current in End Condenser Method

LaTeX Go Capacitive Current in ECM = Sending End Current in ECM-Receiving End Current in ECM

Admittance using A Parameter in End Condenser Method Formula

LaTeX Go

Admittance in ECM = (2*(A Parameter in ECM-1))/Impedance in ECM
Y_ecm = (2*(A_ecm-1))/Z_ecm

What are the disadvantages of condenser end?

Although the end condenser method for the solution of medium lines is simple to work out calculations, yet it has the following drawbacks: There is a considerable error (about 10%) in calculations because the distributed capacitance has been assumed to be lumped or concentrated.

How to Calculate Admittance using A Parameter in End Condenser Method?

Admittance using A Parameter in End Condenser Method calculator uses Admittance in ECM = (2*(A Parameter in ECM-1))/Impedance in ECM to calculate the Admittance in ECM, The Admittance using A Parameter in End Condenser Method formula is defined as the mathematical inverse of the impedance. Admittance in ECM is denoted by Y_ecm symbol.

How to calculate Admittance using A Parameter in End Condenser Method using this online calculator? To use this online calculator for Admittance using A Parameter in End Condenser Method, enter A Parameter in ECM (A_ecm) & Impedance in ECM (Z_ecm) and hit the calculate button. Here is how the Admittance using A Parameter in End Condenser Method calculation can be explained with given input values -> 0.02 = (2*(1.091-1))/9.

FAQ

What is Admittance using A Parameter in End Condenser Method?

The Admittance using A Parameter in End Condenser Method formula is defined as the mathematical inverse of the impedance and is represented as Y_ecm = (2*(A_ecm-1))/Z_ecm or Admittance in ECM = (2*(A Parameter in ECM-1))/Impedance in ECM. A Parameter in ECM is a generalized line constant in a two port transmission line & Impedance in ECM is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.

How to calculate Admittance using A Parameter in End Condenser Method?

The Admittance using A Parameter in End Condenser Method formula is defined as the mathematical inverse of the impedance is calculated using Admittance in ECM = (2*(A Parameter in ECM-1))/Impedance in ECM. To calculate Admittance using A Parameter in End Condenser Method, you need A Parameter in ECM (A_ecm) & Impedance in ECM (Z_ecm). With our tool, you need to enter the respective value for A Parameter in ECM & Impedance in ECM and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search