Adjusted Design Value for Tension Calculator

✖Design Value for Tension is the original value in which correction is applied.ⓘ Design Value for Tension [F_t]			+10% -10%
✖Load Duration Factor is based on the ability of wood to recover after a reasonable load has been applied for a given time.ⓘ Load Duration Factor [C_D]			+10% -10%
✖Wet Service Factor is used to signify wood that will not be used in a dry condition.ⓘ Wet Service Factor [C_m]			+10% -10%
✖Temperature factor is the factor used for wood that is expected to be exposed to high temperatures for long periods of time.ⓘ Temperature Factor [C_t]			+10% -10%
✖Size Factor is the factors that takes non-homogeneity of wood into account.ⓘ Size Factor [C_F]			+10% -10%

✖Adjusted design value is the value either in bending, compression, tension or shear by using other factors.ⓘ Adjusted Design Value for Tension [F']

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Adjustment Factors for Design Values Formulas PDF PDF Image

Adjusted Design Value for Tension Solution

STEP 0: Pre-Calculation Summary

Formula Used

Adjusted Design Value = (Design Value for Tension*Load Duration Factor*Wet Service Factor*Temperature Factor*Size Factor)
F' = (F_t*C_D*C_m*C_t*C_F)
This formula uses 6 Variables

Variables Used

Adjusted Design Value - (Measured in Pascal) - Adjusted design value is the value either in bending, compression, tension or shear by using other factors.
Design Value for Tension - (Measured in Pascal) - Design Value for Tension is the original value in which correction is applied.
Load Duration Factor - Load Duration Factor is based on the ability of wood to recover after a reasonable load has been applied for a given time.
Wet Service Factor - Wet Service Factor is used to signify wood that will not be used in a dry condition.
Temperature Factor - Temperature factor is the factor used for wood that is expected to be exposed to high temperatures for long periods of time.
Size Factor - Size Factor is the factors that takes non-homogeneity of wood into account.

STEP 1: Convert Input(s) to Base Unit

Design Value for Tension: 16.7 Megapascal --> 16700000 Pascal (Check conversion here)
Load Duration Factor: 0.74 --> No Conversion Required
Wet Service Factor: 0.81 --> No Conversion Required
Temperature Factor: 0.8 --> No Conversion Required
Size Factor: 1.05 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F' = (F_t*C_D*C_m*C_t*C_F) --> (16700000*0.74*0.81*0.8*1.05)

Evaluating ... ...

F' = 8408383.2

STEP 3: Convert Result to Output's Unit

8408383.2 Pascal -->8.4083832 Megapascal (Check conversion here)

FINAL ANSWER

8.4083832 ≈ 8.408383 Megapascal <-- Adjusted Design Value

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Timber Engineering » Adjustment Factors for Design Values » Adjusted Design Value for Tension

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Himanshi Sharma

Bhilai Institute of Technology (BIT), Raipur

Himanshi Sharma has verified this Calculator and 800+ more calculators!

< Adjustment Factors for Design Values Calculators

Adjusted Design Value for Compression Parallel to Grain

LaTeX Go Adjusted Design Value = (Design Value for Parallel Compression*Load Duration Factor*Wet Service Factor*Temperature Factor*Size Factor*Column Stability Factor)

Adjusted Design Value for Shear

LaTeX Go Adjusted Design Value = Design Value for Shear*Load Duration Factor*Wet Service Factor*Temperature Factor*Shear Stress Factor

Adjusted Design Value for Tension

LaTeX Go Adjusted Design Value = (Design Value for Tension*Load Duration Factor*Wet Service Factor*Temperature Factor*Size Factor)

Adjusted Design Value for Compression Perpendicular to Grain

LaTeX Go Adjusted Design Value = Design Value for Compression Perpendicular*Wet Service Factor*Temperature Factor*Bearing Area Factor

Adjusted Design Value for Tension Formula

LaTeX Go

Adjusted Design Value = (Design Value for Tension*Load Duration Factor*Wet Service Factor*Temperature Factor*Size Factor)
F' = (F_t*C_D*C_m*C_t*C_F)

What is Adjusted Design Value?

Application of the required adjustment is necessary as there is always some variation in the design values calculated in timber.

What is Size Factor?

Wood is not a homogeneous material (like steel), and one of the factors that takes this non-homogeneity into account is the Wood Size Factor (CF).

How to Calculate Adjusted Design Value for Tension?

Adjusted Design Value for Tension calculator uses Adjusted Design Value = (Design Value for Tension*Load Duration Factor*Wet Service Factor*Temperature Factor*Size Factor) to calculate the Adjusted Design Value, The Adjusted Design Value for Tension formula is defined as by taking the load-duration factor, wet-service factor, temperature factor, and size factor into consideration. Adjusted Design Value is denoted by F' symbol.

How to calculate Adjusted Design Value for Tension using this online calculator? To use this online calculator for Adjusted Design Value for Tension, enter Design Value for Tension (F_t), Load Duration Factor (C_D), Wet Service Factor (C_m), Temperature Factor (C_t) & Size Factor (C_F) and hit the calculate button. Here is how the Adjusted Design Value for Tension calculation can be explained with given input values -> 8.4E-6 = (16700000*0.74*0.81*0.8*1.05).

FAQ

What is Adjusted Design Value for Tension?

The Adjusted Design Value for Tension formula is defined as by taking the load-duration factor, wet-service factor, temperature factor, and size factor into consideration and is represented as F' = (F_t*C_D*C_m*C_t*C_F) or Adjusted Design Value = (Design Value for Tension*Load Duration Factor*Wet Service Factor*Temperature Factor*Size Factor). Design Value for Tension is the original value in which correction is applied, Load Duration Factor is based on the ability of wood to recover after a reasonable load has been applied for a given time, Wet Service Factor is used to signify wood that will not be used in a dry condition, Temperature factor is the factor used for wood that is expected to be exposed to high temperatures for long periods of time & Size Factor is the factors that takes non-homogeneity of wood into account.

How to calculate Adjusted Design Value for Tension?

The Adjusted Design Value for Tension formula is defined as by taking the load-duration factor, wet-service factor, temperature factor, and size factor into consideration is calculated using Adjusted Design Value = (Design Value for Tension*Load Duration Factor*Wet Service Factor*Temperature Factor*Size Factor). To calculate Adjusted Design Value for Tension, you need Design Value for Tension (F_t), Load Duration Factor (C_D), Wet Service Factor (C_m), Temperature Factor (C_t) & Size Factor (C_F). With our tool, you need to enter the respective value for Design Value for Tension, Load Duration Factor, Wet Service Factor, Temperature Factor & Size Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Adjusted Design Value?

In this formula, Adjusted Design Value uses Design Value for Tension, Load Duration Factor, Wet Service Factor, Temperature Factor & Size Factor. We can use 3 other way(s) to calculate the same, which is/are as follows -

Adjusted Design Value = Design Value for Shear*Load Duration Factor*Wet Service Factor*Temperature Factor*Shear Stress Factor
Adjusted Design Value = Design Value for Compression Perpendicular*Wet Service Factor*Temperature Factor*Bearing Area Factor
Adjusted Design Value = (Design Value for Parallel Compression*Load Duration Factor*Wet Service Factor*Temperature Factor*Size Factor*Column Stability Factor)

Home

FREE PDFs

🔍 Search