Actual Velocity given Theoretical Velocity at Section 2 Calculator

✖The Coefficient of Velocity refers to the ratio of the actual velocity of a fluid jet at the vena contracta (the point of minimum cross-sectional area) to the theoretical velocity of the jet.ⓘ Coefficient of Velocity [C_v]			+10% -10%
✖The Velocity at Point 2 refers to the direction of the movement of the body or the object.ⓘ Velocity at Point 2 [V_p2]			+10% -10%

✖The Actual Velocity refers to the velocity at which a microscopic particle of dust would be traveling if it were in the air stream.ⓘ Actual Velocity given Theoretical Velocity at Section 2 [v]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Devices to Measure Flow Rate Formulas PDF PDF Image

Actual Velocity given Theoretical Velocity at Section 2 Solution

STEP 0: Pre-Calculation Summary

Formula Used

Actual Velocity = Coefficient of Velocity*Velocity at Point 2
v = C_v*V_p2
This formula uses 3 Variables

Variables Used

Actual Velocity - (Measured in Meter per Second) - The Actual Velocity refers to the velocity at which a microscopic particle of dust would be traveling if it were in the air stream.
Coefficient of Velocity - The Coefficient of Velocity refers to the ratio of the actual velocity of a fluid jet at the vena contracta (the point of minimum cross-sectional area) to the theoretical velocity of the jet.
Velocity at Point 2 - (Measured in Meter per Second) - The Velocity at Point 2 refers to the direction of the movement of the body or the object.

STEP 1: Convert Input(s) to Base Unit

Coefficient of Velocity: 0.92 --> No Conversion Required
Velocity at Point 2: 34 Meter per Second --> 34 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

v = C_v*V_p2 --> 0.92*34

Evaluating ... ...

v = 31.28

STEP 3: Convert Result to Output's Unit

31.28 Meter per Second --> No Conversion Required

FINAL ANSWER

31.28 Meter per Second <-- Actual Velocity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Devices to Measure Flow Rate » Orifice Meter » Actual Velocity given Theoretical Velocity at Section 2

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Orifice Meter Calculators

Theoretical Velocity at Section 1 in Orifice Meter

LaTeX Go Velocity at Point 1 = sqrt((Velocity at Point 2^2)-(2*[g]*Venturi Head))

Theoretical Velocity at Section 2 in Orifice Meter

LaTeX Go Velocity at Point 2 = sqrt(2*[g]*Venturi Head+Velocity at Point 1^2)

Area at Section 2 or at Vena Contracta

LaTeX Go Cross Section Area 2 = Coefficient of Contraction*Area of Orifice

Actual Velocity given Theoretical Velocity at Section 2

LaTeX Go Actual Velocity = Coefficient of Velocity*Velocity at Point 2

Actual Velocity given Theoretical Velocity at Section 2 Formula

LaTeX Go

Actual Velocity = Coefficient of Velocity*Velocity at Point 2
v = C_v*V_p2

What are the Advantages of using an Orifice meter?

Some advantages of using an Orifice meter include its simplicity, cost-effectiveness, and wide range of applications for measuring flow rates of liquids, gases, and steam in various industries.

How to Calculate Actual Velocity given Theoretical Velocity at Section 2?

Actual Velocity given Theoretical Velocity at Section 2 calculator uses Actual Velocity = Coefficient of Velocity*Velocity at Point 2 to calculate the Actual Velocity, The Actual Velocity given Theoretical Velocity at Section 2 formula is defined as measured velocity for the actual value. Actual Velocity is denoted by v symbol.

How to calculate Actual Velocity given Theoretical Velocity at Section 2 using this online calculator? To use this online calculator for Actual Velocity given Theoretical Velocity at Section 2, enter Coefficient of Velocity (C_v) & Velocity at Point 2 (V_p2) and hit the calculate button. Here is how the Actual Velocity given Theoretical Velocity at Section 2 calculation can be explained with given input values -> 31.28 = 0.92*34.

FAQ

What is Actual Velocity given Theoretical Velocity at Section 2?

The Actual Velocity given Theoretical Velocity at Section 2 formula is defined as measured velocity for the actual value and is represented as v = C_v*V_p2 or Actual Velocity = Coefficient of Velocity*Velocity at Point 2. The Coefficient of Velocity refers to the ratio of the actual velocity of a fluid jet at the vena contracta (the point of minimum cross-sectional area) to the theoretical velocity of the jet & The Velocity at Point 2 refers to the direction of the movement of the body or the object.

How to calculate Actual Velocity given Theoretical Velocity at Section 2?

The Actual Velocity given Theoretical Velocity at Section 2 formula is defined as measured velocity for the actual value is calculated using Actual Velocity = Coefficient of Velocity*Velocity at Point 2. To calculate Actual Velocity given Theoretical Velocity at Section 2, you need Coefficient of Velocity (C_v) & Velocity at Point 2 (V_p2). With our tool, you need to enter the respective value for Coefficient of Velocity & Velocity at Point 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Actual Velocity?

In this formula, Actual Velocity uses Coefficient of Velocity & Velocity at Point 2. We can use 1 other way(s) to calculate the same, which is/are as follows -

Actual Velocity = Coefficient of Velocity*sqrt(2*[g]*Venturi Head+(Velocity at Point 2*Coefficient of Contraction*Area of Orifice/Cross Section Area 1)^2)

Home

FREE PDFs

🔍 Search