A-Phase Current using Sequence Voltages and Fault Impedance(LGF) Calculator

✖Zero Sequence Voltage LG consists of a balanced three-phase voltage and current, phasors of which all have the same phase angles and rotate counterclockwise together.ⓘ Zero Sequence Voltage LG [V_0(lg)]			+10% -10%
✖Positive Sequence Voltage LG consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ABC rotation.ⓘ Positive Sequence Voltage LG [V_1(lg)]			+10% -10%
✖Negative Sequence Voltage LG consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ACB rotation.ⓘ Negative Sequence Voltage LG [V_2(lg)]			+10% -10%
✖Fault Impedance LG is a measure of the resistance and reactance in an electrical circuit that is used to calculate the fault current that flows through the circuit in the event of a fault.ⓘ Fault Impedance LG [Z_f(lg)]			+10% -10%

✖A-phase Current LG is the current that flows into the a-phase in open conductor fault.ⓘ A-Phase Current using Sequence Voltages and Fault Impedance(LGF) [I_a(lg)]

⎘ Copy

👎

Formula

✖

A-Phase Current using Sequence Voltages and Fault Impedance(LGF)

Formula

I a(lg) = \frac{V 0(lg) + V 1(lg) + V 2(lg)}{Z f(lg)}

Example

34.104 A = \frac{17.6 V + 17.5 V + 16.056 V}{1.5 Ω}

Calculator

LaTeX

Reset

👍

Download Fault Formula PDF PDF Image

A-Phase Current using Sequence Voltages and Fault Impedance(LGF) Solution

STEP 0: Pre-Calculation Summary

Formula Used

A-Phase Current LG = (Zero Sequence Voltage LG+Positive Sequence Voltage LG+Negative Sequence Voltage LG)/Fault Impedance LG
I_a(lg) = (V_0(lg)+V_1(lg)+V_2(lg))/Z_f(lg)
This formula uses 5 Variables

Variables Used

A-Phase Current LG - (Measured in Ampere) - A-phase Current LG is the current that flows into the a-phase in open conductor fault.
Zero Sequence Voltage LG - (Measured in Volt) - Zero Sequence Voltage LG consists of a balanced three-phase voltage and current, phasors of which all have the same phase angles and rotate counterclockwise together.
Positive Sequence Voltage LG - (Measured in Volt) - Positive Sequence Voltage LG consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ABC rotation.
Negative Sequence Voltage LG - (Measured in Volt) - Negative Sequence Voltage LG consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ACB rotation.
Fault Impedance LG - (Measured in Ohm) - Fault Impedance LG is a measure of the resistance and reactance in an electrical circuit that is used to calculate the fault current that flows through the circuit in the event of a fault.

STEP 1: Convert Input(s) to Base Unit

Zero Sequence Voltage LG: 17.6 Volt --> 17.6 Volt No Conversion Required
Positive Sequence Voltage LG: 17.5 Volt --> 17.5 Volt No Conversion Required
Negative Sequence Voltage LG: 16.056 Volt --> 16.056 Volt No Conversion Required
Fault Impedance LG: 1.5 Ohm --> 1.5 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_a(lg) = (V_0(lg)+V_1(lg)+V_2(lg))/Z_f(lg) --> (17.6+17.5+16.056)/1.5

Evaluating ... ...

I_a(lg) = 34.104

STEP 3: Convert Result to Output's Unit

34.104 Ampere --> No Conversion Required

FINAL ANSWER

34.104 Ampere <-- A-Phase Current LG

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Electrical » Power System » Fault » Shunt Faults » Unsymmetrical Faults » L G Fault » Current » A-Phase Current using Sequence Voltages and Fault Impedance(LGF)

Credits

Created by Nisarg

Indian Institute of Technology,Roorlee (IITR), Roorkee

Nisarg has created this Calculator and 100+ more calculators!

Verified by Parminder Singh

Chandigarh University (CU), Punjab

Parminder Singh has verified this Calculator and 500+ more calculators!

< Current Calculators

Positive Sequence Current using Fault Impedance(LGF)

Go Positive Sequence Current LG = (Positive Sequence Voltage LG+Negative Sequence Voltage LG+Zero Sequence Voltage LG)/(3*Fault Impedance LG)

A-Phase Current using Positive Sequence Current (LGF)

Go A-Phase Current LG = Positive Sequence Current LG*3

A-Phase Current using Negative Sequence Current (LGF)

Go A-Phase Current LG = 3*Negative Sequence Current LG

A-Phase Current using Zero Sequence Current (LGF)

Go A-Phase Current LG = Zero Sequence Current LG*3

A-Phase Current using Sequence Voltages and Fault Impedance(LGF) Formula

A-Phase Current LG = (Zero Sequence Voltage LG+Positive Sequence Voltage LG+Negative Sequence Voltage LG)/Fault Impedance LG
I_a(lg) = (V_0(lg)+V_1(lg)+V_2(lg))/Z_f(lg)

What are the Sequence Components?

The positive sequence consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ABC rotation. The negative sequence consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ACB rotation. Zero sequence consists of a balanced three-phase voltage and current, phasors of which all have the same phase angles and rotate counterclockwise together.

How to Calculate A-Phase Current using Sequence Voltages and Fault Impedance(LGF)?

A-Phase Current using Sequence Voltages and Fault Impedance(LGF) calculator uses A-Phase Current LG = (Zero Sequence Voltage LG+Positive Sequence Voltage LG+Negative Sequence Voltage LG)/Fault Impedance LG to calculate the A-Phase Current LG, The A-phase current using Sequence Voltages and Fault Impedance(LGF) formula is defined as the current through any one component comprising a three-phase source or load. here we have taken the a-phase. A-Phase Current LG is denoted by I_a(lg) symbol.

How to calculate A-Phase Current using Sequence Voltages and Fault Impedance(LGF) using this online calculator? To use this online calculator for A-Phase Current using Sequence Voltages and Fault Impedance(LGF), enter Zero Sequence Voltage LG (V_0(lg)), Positive Sequence Voltage LG (V_1(lg)), Negative Sequence Voltage LG (V_2(lg)) & Fault Impedance LG (Z_f(lg)) and hit the calculate button. Here is how the A-Phase Current using Sequence Voltages and Fault Impedance(LGF) calculation can be explained with given input values -> 34.104 = (17.6+17.5+16.056)/1.5.

FAQ

What is A-Phase Current using Sequence Voltages and Fault Impedance(LGF)?

The A-phase current using Sequence Voltages and Fault Impedance(LGF) formula is defined as the current through any one component comprising a three-phase source or load. here we have taken the a-phase and is represented as I_a(lg) = (V_0(lg)+V_1(lg)+V_2(lg))/Z_f(lg) or A-Phase Current LG = (Zero Sequence Voltage LG+Positive Sequence Voltage LG+Negative Sequence Voltage LG)/Fault Impedance LG. Zero Sequence Voltage LG consists of a balanced three-phase voltage and current, phasors of which all have the same phase angles and rotate counterclockwise together, Positive Sequence Voltage LG consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ABC rotation, Negative Sequence Voltage LG consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ACB rotation & Fault Impedance LG is a measure of the resistance and reactance in an electrical circuit that is used to calculate the fault current that flows through the circuit in the event of a fault.

How to calculate A-Phase Current using Sequence Voltages and Fault Impedance(LGF)?

The A-phase current using Sequence Voltages and Fault Impedance(LGF) formula is defined as the current through any one component comprising a three-phase source or load. here we have taken the a-phase is calculated using A-Phase Current LG = (Zero Sequence Voltage LG+Positive Sequence Voltage LG+Negative Sequence Voltage LG)/Fault Impedance LG. To calculate A-Phase Current using Sequence Voltages and Fault Impedance(LGF), you need Zero Sequence Voltage LG (V_0(lg)), Positive Sequence Voltage LG (V_1(lg)), Negative Sequence Voltage LG (V_2(lg)) & Fault Impedance LG (Z_f(lg)). With our tool, you need to enter the respective value for Zero Sequence Voltage LG, Positive Sequence Voltage LG, Negative Sequence Voltage LG & Fault Impedance LG and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate A-Phase Current LG?

In this formula, A-Phase Current LG uses Zero Sequence Voltage LG, Positive Sequence Voltage LG, Negative Sequence Voltage LG & Fault Impedance LG. We can use 3 other way(s) to calculate the same, which is/are as follows -

A-Phase Current LG = Positive Sequence Current LG*3
A-Phase Current LG = 3*Negative Sequence Current LG
A-Phase Current LG = Zero Sequence Current LG*3

Home

FREE PDFs

🔍 Search