A-Phase Current (Two Conductor Open) Calculator

✖Positive Sequence Current in TCO is consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ABC rotation.ⓘ Positive Sequence Current in TCO [I_1(tco)]			+10% -10%
✖Negative Sequence Current in TCO in open conductor fault is consists of balanced three-phase current phasors which are exactly at 120 degrees apart rotating counterclockwise in ACB rotation.ⓘ Negative Sequence Current in TCO [I_2(tco)]			+10% -10%
✖Zero Sequence Current in TCO is consists of a balanced three-phase current, phasors of which all have the same phase angles and rotate counterclockwise together.ⓘ Zero Sequence Current in TCO [I_0(tco)]			+10% -10%

✖A-Phase Current in TCO is the current that flows into the a-phase in open conductor fault.ⓘ A-Phase Current (Two Conductor Open) [I_a(tco)]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Open Conductor Fault Formulas PDF PDF Image

A-Phase Current (Two Conductor Open) Solution

STEP 0: Pre-Calculation Summary

Formula Used

A-Phase Current in TCO = Positive Sequence Current in TCO+Negative Sequence Current in TCO+Zero Sequence Current in TCO
I_a(tco) = I_1(tco)+I_2(tco)+I_0(tco)
This formula uses 4 Variables

Variables Used

A-Phase Current in TCO - (Measured in Ampere) - A-Phase Current in TCO is the current that flows into the a-phase in open conductor fault.
Positive Sequence Current in TCO - (Measured in Ampere) - Positive Sequence Current in TCO is consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ABC rotation.
Negative Sequence Current in TCO - (Measured in Ampere) - Negative Sequence Current in TCO in open conductor fault is consists of balanced three-phase current phasors which are exactly at 120 degrees apart rotating counterclockwise in ACB rotation.
Zero Sequence Current in TCO - (Measured in Ampere) - Zero Sequence Current in TCO is consists of a balanced three-phase current, phasors of which all have the same phase angles and rotate counterclockwise together.

STEP 1: Convert Input(s) to Base Unit

Positive Sequence Current in TCO: 2.01 Ampere --> 2.01 Ampere No Conversion Required
Negative Sequence Current in TCO: 0.64 Ampere --> 0.64 Ampere No Conversion Required
Zero Sequence Current in TCO: 2.19 Ampere --> 2.19 Ampere No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_a(tco) = I_1(tco)+I_2(tco)+I_0(tco) --> 2.01+0.64+2.19

Evaluating ... ...

I_a(tco) = 4.84

STEP 3: Convert Result to Output's Unit

4.84 Ampere --> No Conversion Required

FINAL ANSWER

4.84 Ampere <-- A-Phase Current in TCO

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Fault » Open Conductor Fault » Two Conductor Open » A-Phase Current (Two Conductor Open)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Two Conductor Open Calculators

A-Phase EMF using Positive Sequence Current (Two Conductor Open)

LaTeX Go A Phase EMF in TCO = Positive Sequence Current in TCO*(Positive Sequence Impedance in TCO+Negative Sequence Impedance in TCO+Zero Sequence Impedance in TCO)

A-Phase Voltage using Sequence Voltages (Two Conductor Open)

LaTeX Go A Phase Voltage in TCO = Positive Sequence Voltage in TCO+Negative Sequence Voltage in TCO+Zero Sequence Voltage in TCO

A-Phase Current (Two Conductor Open)

LaTeX Go A-Phase Current in TCO = Positive Sequence Current in TCO+Negative Sequence Current in TCO+Zero Sequence Current in TCO

Potential Difference between C-Phase (Two Conductor Open)

LaTeX Go Potential Difference between C Phase in TCO = (3*Zero Sequence Potential Difference in TCO)-Potential Difference between B Phase in TCO

A-Phase Current (Two Conductor Open) Formula

LaTeX Go

A-Phase Current in TCO = Positive Sequence Current in TCO+Negative Sequence Current in TCO+Zero Sequence Current in TCO
I_a(tco) = I_1(tco)+I_2(tco)+I_0(tco)

What is two open conductor fault?

When two phases of a balanced three-phase line open it creates an unbalance in the system and results in the flow of unbalanced currents. Such conditions occur in the system when one or two conductors of a transmission line are broken due to storm or if fuses, isolators, or circuit breakers operate only on one or two phases leaving others connected

How to Calculate A-Phase Current (Two Conductor Open)?

A-Phase Current (Two Conductor Open) calculator uses A-Phase Current in TCO = Positive Sequence Current in TCO+Negative Sequence Current in TCO+Zero Sequence Current in TCO to calculate the A-Phase Current in TCO, The a-phase Current (Two conductor open) formula is defined as the current through any one component comprising a three-phase source or load. here we have taken the a-phase. A-Phase Current in TCO is denoted by I_a(tco) symbol.

How to calculate A-Phase Current (Two Conductor Open) using this online calculator? To use this online calculator for A-Phase Current (Two Conductor Open), enter Positive Sequence Current in TCO (I_1(tco)), Negative Sequence Current in TCO (I_2(tco)) & Zero Sequence Current in TCO (I_0(tco)) and hit the calculate button. Here is how the A-Phase Current (Two Conductor Open) calculation can be explained with given input values -> 4.84 = 2.01+0.64+2.19.

FAQ

What is A-Phase Current (Two Conductor Open)?

The a-phase Current (Two conductor open) formula is defined as the current through any one component comprising a three-phase source or load. here we have taken the a-phase and is represented as I_a(tco) = I_1(tco)+I_2(tco)+I_0(tco) or A-Phase Current in TCO = Positive Sequence Current in TCO+Negative Sequence Current in TCO+Zero Sequence Current in TCO. Positive Sequence Current in TCO is consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ABC rotation, Negative Sequence Current in TCO in open conductor fault is consists of balanced three-phase current phasors which are exactly at 120 degrees apart rotating counterclockwise in ACB rotation & Zero Sequence Current in TCO is consists of a balanced three-phase current, phasors of which all have the same phase angles and rotate counterclockwise together.

How to calculate A-Phase Current (Two Conductor Open)?

The a-phase Current (Two conductor open) formula is defined as the current through any one component comprising a three-phase source or load. here we have taken the a-phase is calculated using A-Phase Current in TCO = Positive Sequence Current in TCO+Negative Sequence Current in TCO+Zero Sequence Current in TCO. To calculate A-Phase Current (Two Conductor Open), you need Positive Sequence Current in TCO (I_1(tco)), Negative Sequence Current in TCO (I_2(tco)) & Zero Sequence Current in TCO (I_0(tco)). With our tool, you need to enter the respective value for Positive Sequence Current in TCO, Negative Sequence Current in TCO & Zero Sequence Current in TCO and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search