A-Parameter in Nominal T Method Calculator

✖Admittance in T is the mathematical inverse of the impedance in a medium transmission line.ⓘ Admittance in T [Y_t]			+10% -10%
✖Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.ⓘ Impedance in T [Z_t]			+10% -10%

✖A Parameter in T is a generalized line constant in a two port transmission line.ⓘ A-Parameter in Nominal T Method [A_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Nominal T Method in Medium Line Formulas PDF PDF Image

A-Parameter in Nominal T Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

A Parameter in T = 1+(Admittance in T*Impedance in T/2)
A_t = 1+(Y_t*Z_t/2)
This formula uses 3 Variables

Variables Used

A Parameter in T - A Parameter in T is a generalized line constant in a two port transmission line.
Admittance in T - (Measured in Siemens) - Admittance in T is the mathematical inverse of the impedance in a medium transmission line.
Impedance in T - (Measured in Ohm) - Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.

STEP 1: Convert Input(s) to Base Unit

Admittance in T: 0.0221 Siemens --> 0.0221 Siemens No Conversion Required
Impedance in T: 9.07 Ohm --> 9.07 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_t = 1+(Y_t*Z_t/2) --> 1+(0.0221*9.07/2)

Evaluating ... ...

A_t = 1.1002235

STEP 3: Convert Result to Output's Unit

1.1002235 --> No Conversion Required

FINAL ANSWER

1.1002235 ≈ 1.100224 <-- A Parameter in T

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Medium Line » Nominal T Method in Medium Line » A-Parameter in Nominal T Method

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has verified this Calculator and 100+ more calculators!

< Nominal T Method in Medium Line Calculators

Receiving End Angle using Sending End Power in Nominal T Method

LaTeX Go Receiving End Phase Angle in T = acos((Sending End Power in T-Power Loss in T)/(Receiving End Voltage in T*Receiving End Current in T*3))

Sending End Current using Losses in Nominal T Method

LaTeX Go Sending End Current in T = sqrt((Power Loss in T/(3/2)*Resistance in T)-(Receiving End Current in T^2))

Capacitive Voltage in Nominal T Method

LaTeX Go Capacitive Voltage in T = Receiving End Voltage in T+(Receiving End Current in T*Impedance in T/2)

Losses in Nominal T Method

LaTeX Go Power Loss in T = 3*(Resistance in T/2)*(Receiving End Current in T^2+Sending End Current in T^2)

A-Parameter in Nominal T Method Formula

LaTeX Go

A Parameter in T = 1+(Admittance in T*Impedance in T/2)
A_t = 1+(Y_t*Z_t/2)

What is ABCD parameter?

The A, B, C, and D are the constants also known as the transmission parameters or chain parameters. These parameters are used for the analysis of an electrical network. It is also used for determining the performance of input, output voltage, and current of the transmission network.

How to Calculate A-Parameter in Nominal T Method?

A-Parameter in Nominal T Method calculator uses A Parameter in T = 1+(Admittance in T*Impedance in T/2) to calculate the A Parameter in T, The A-Parameter in Nominal T method formula is defined as a generalized line constant. It is used for determining the performance of input, output voltage, and current of the transmission network. A Parameter in T is denoted by A_t symbol.

How to calculate A-Parameter in Nominal T Method using this online calculator? To use this online calculator for A-Parameter in Nominal T Method, enter Admittance in T (Y_t) & Impedance in T (Z_t) and hit the calculate button. Here is how the A-Parameter in Nominal T Method calculation can be explained with given input values -> 1.095235 = 1+(0.0221*9.07/2).

FAQ

What is A-Parameter in Nominal T Method?

The A-Parameter in Nominal T method formula is defined as a generalized line constant. It is used for determining the performance of input, output voltage, and current of the transmission network and is represented as A_t = 1+(Y_t*Z_t/2) or A Parameter in T = 1+(Admittance in T*Impedance in T/2). Admittance in T is the mathematical inverse of the impedance in a medium transmission line & Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.

How to calculate A-Parameter in Nominal T Method?

The A-Parameter in Nominal T method formula is defined as a generalized line constant. It is used for determining the performance of input, output voltage, and current of the transmission network is calculated using A Parameter in T = 1+(Admittance in T*Impedance in T/2). To calculate A-Parameter in Nominal T Method, you need Admittance in T (Y_t) & Impedance in T (Z_t). With our tool, you need to enter the respective value for Admittance in T & Impedance in T and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate A Parameter in T?

In this formula, A Parameter in T uses Admittance in T & Impedance in T. We can use 1 other way(s) to calculate the same, which is/are as follows -

A Parameter in T = (1+(B Parameter in T*C Parameter))/D Parameter in T

Home

FREE PDFs

🔍 Search